Unlock - Mở Khóa HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

Huawei Nova 2i RNE-L22 Remove FRP Online

Mã:

@thanhnamPDAviet
>>>>search android fastboot devices...
>>>>Get android fastboot devices...
	Mobile Name: RNE-L22
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Dynamic unlock code:66599786c186c792>>>>try temp unlock bootloader function 2...
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Dynamic unlock code:37e5ee28ce35cc38	Bootloader Temporary  Unlock Done
	tip:Bootloader Temporary after reboot will lock again
>>>>Clear Frp Block
	...
	(bootloader) The device will reboot and do factory reset...
	FAILED (status read failed (Too many links))
	finished. total time: 0.100s
>>>>Rebooting Mobile Phone
	rebooting...
	
	finished. total time: 0.040s

 

HUAWEI Y6II CAM-L21 Remove FRP online

Mã:

@thanhnamPDAviet
Connecting Fastboot .......
Connecting Fastboot .......Ok
Model Phone: CAM-L21
SW: :CAM-L21C636B190
Connecting Server .....
Connecting Server .....Ok
Erase Done , The Device Will Reboot And Factory Reset
Reboot ...............OK

 

Vivo Vv9 1727 Remove Password - FRP Online

Mã:

@thanhnamPDAviet
Device : Vivo V9
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_003.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1727
Software : OPM1.171019.011 release-keys, eng.compil.20180421.233610 [Sat Apr 21 23:36:10 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-04-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
 
 
Device : Vivo V9
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_003.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1727
Software : OPM1.171019.011 release-keys, eng.compil.20180421.233610 [Sat Apr 21 23:36:10 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-04-01
Resetting FRP Lock......Done
Operation Finished.

 

T Plus Pad 7 MT6580 Remove FRP Done
T Plus Pad 7 MT6580 Remove FRP By CM2
T Plus Pad 7 MT6580 Remove FRP Via Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642043450AD32F93E7
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642043450AD32F93E7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID	: 0xF85F4F299DEADFA3392C6C80E53D3FFB
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
 
 
Clear FRP ( Google Reset Protection )
Clear Ok!
 
 
 
 

 

Xiaomi Redmi Note 4 (Mido) Remove Mi Account - FRP Online

Mã:

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_003.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937]
Software : N2G47H, V9.5.9.0.NDKMIFA [Thu May 31 21:03:46 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-05-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.

 

Alcatel OT-875 Unlock Network Done
Alcatel OT-875 Unlock Network By Sigma
Alcatel OT-875 Unlock Network Via Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

 

Mobel S40 SC7731 Remove FRP Online

Mã:

@thanhnamPDAviet
 
 ====  Wait for phone...
 
Phone found! [ 187 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0	 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
 
FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!
 
eMMC phone detected! Will use 'Safe Format' mode!
 
Mount : /data
Size  : 0x000000012D4F7000
State : 0x0001
 
Mount : /cache
Size  : 0x0000000009600000
State : 0x0001
 
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
 
Android 5.x/6.x : Reset FRP Lock
Reset Ok!
 
 
Done!
 
 
 
 

 

Huawei Honor V9 DUK-AL20 Xóa Tài Khoản Huawei Thành Công
Huawei Honor V9 DUK-AL20 Remove Huawei Account Done
Huawei Honor V9 DUK-AL20 Remove Huawei Account By MRT
Huawei Honor V9 DUK-AL20 Remove Huawei Account Via Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
 
>>>>Searching mobile phones...
	Get Hisi cpu Mobile Phones...
>>> Get Mobile Port:  COM181
>>>>Device identification : 
	Android Adapter PCUI
>>>>Switch Mobile to Auth Mode
	PCB SN: DU4KKL1796040795
	Mobile SN:  FFKDU17905000616
	Mobile Code: mission
 
>>>>Ersaeing Mobile accoutn data...
>>>>Doing Factory Reset...Success
	All is done

 

Nokia 2 TA-1029 Xóa Xác Minh Tài Khoản Gmail Thành Công
Nokia 2 TA-1029 Remove Password - FRP By UMT
Nokia 2 TA-1029 Remove Password - FRP Done
Nokia 2 TA-1029 Remove Password - FRP Via Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966024663C39A5B06
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8909_ddr_nokia_2.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : FIH Unknown [msm8909]
Software : 00WW_0_64G, 00WW_0_64G [Fri Apr 20 19:55:15 CST 2018]
Android Ver. : 7.1.1
Patch Level : 2018-05-01
Resetting FRP Lock......Done
Operation Finished.

 

Unlock - Mở Mạng HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

 

OPPO F3 CPH1609 Remove Lock Screen - FRP Via Teamviewer

 

OPPO A71 CPH1801 Remove Lock Screen - FRP Via Teamviewer

Mã:

@thanhnamPDAviet
>>>Try connect to mobile...Success
	CPU_SN:  0x529C1407
	MSM_ID:  0x0009A0E1
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>Switch mobile to RE\WR ...Success
	Flasy type:  eMMC
>>>>Reading Mobile IMEI Info...Success
	org imei:@thanhnamPDAviet
>>>>Erasing Userdata...
	Corresponding operation completed!!!

 

Itel P51 MT6580 Remove Lock Screen - FRP Done
Itel P51 MT6580 Remove Lock Screen - FRP BY CM2
Itel P51 MT6580 Remove Lock Screen - FRP Via Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454841454538011ACB07C7B489
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 8EEAH
[eMMC] : FLASH_CID : 700100454841454538011ACB07C7B489
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000390000000
[eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB]
DEV RID	: 0xF85F4F29183C9124CC9FA95959CC8EF7
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
 
 
Clear FRP ( Google Reset Protection )
Clear Ok!
 
Done!
Elapsed: 00:00:12
 
 
 

 

Xiaomi Mi 5X (tiffany) Remove Mi Account Done
Xiaomi Mi 5X (tiffany) Remove Mi Account By TWRP
Xiaomi Mi 5X (tiffany) Remove Mi Account Via Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

 

Xiaomi Mi Max 2 (oxygen) Remove Mi Account Done
Xiaomi Mi Max 2 (oxygen) Remove Mi Account BY BST
Xiaomi Mi Max 2 (oxygen) Remove Mi Account Via Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
 
 
Removing Account Lock ... 
Wait device ready ...
Sending Loader ...
Writing data ... OK

 

Unlock ALL Alcatel

 

OPPO A83 CPH1729 Remove Password - Google Account Online

 

Mobell S40 Remove Google Account Online

 

Xiaomi Note 3 Pro Remove Mi Account Online

 

Asus ZenFone 3 Max ZC520TL X008D Remove Google Account Online

Mã:

@thanhnamPDAviet
Platform: ASUS
Selected model: ZC520TL (X008D)
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM127
Detecting Chip Version...
HW Chip: MT6737T: 0321.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.42473461.32A411DA.4CF43D4D
eMMC Flash: Hynix: HBG4a2
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
Internal RAM size: 128 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: asus
Model: ASUS_X008D
Device: ASUS_X008
Platform: mt6737t
Android version: 7.0
Display ID: NRD90M.WW_Phone-14.01.1710.77-20171020
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ASUS_ZC520TL (X008D)_20-06-2018_14-34-14.dump file
 

 

Huawei Honor 8 Lite PRA-AL00 Remove Huawei Account Online

Mã:

@thanhnamPDAviet
>>>>Searching mobile phones...
	Get Hisi cpu Mobile Phones...
>>> Get Mobile Port:  COM195
>>>>Device identification : 
	Android Adapter PCUI
>>>>Switch Mobile to Auth Mode
	PCB SN: 4C4EWK171M030519
	Mobile SN:  HMK4C17123001727
	Mobile Code: mission
 
>>>>Ersaeing Mobile accoutn data...
>>>>Doing Factory Reset...Success
	All is done

 

Amazon Fire Phone SD4930UR Unlock Network Done
Amazon Fire Phone SD4930UR Unlock Network By UMT
Amazon Fire Phone SD4930UR Unlock Network Online

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Port : COM197 : Qualcomm HS-USB Android DIAG 901D (COM197)
Baud Rate : 921600
Device : QC Universal
Operation : Direct Unlock
Opening Port... OK
Reading Information... OK
Compile : Jan 27 2015 10:11:32
Release : Jan 08 2015 00:00:00
Hw Ver. : AAAAANSZ
IMEI : @thanhnamPDAviet
Reading Personalization Data... OK
Saving Data Backup... OK
Found Code Set
NCK : 24157593  Unlocked
NSCK : 35122695  Unlocked
CCK : 63183095  Unlocked
SPCK : 95826668  Unlocked
SIM : 02492667  Unlocked
Executing Direct Unlock... OK
Port Closed.
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 5.0]
Log Saved to Logs\180620_105136.log

 

OPPO A71 CPH1801 Xóa Mã Bảo Vệ Qua Teamviewer

 

Asus ZenPad 8.0 Z380M P00A Xóa FRP Thành Công
Asus ZenPad 8.0 Z380M P00A Xóa FRP (Octopus FRP)
Asus ZenPad 8.0 Z380M P00A Xóa FRP Qua Teamviewer

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Platform: ASUS
Selected model: P00A
Put the phone into Fastboot Mode:
1. Power phone OFF; 
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Phone found.
Enabling "USB Debugging" mode...
Rebooting to Normal mode...
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: asus P00A
SW version: NRD90M
Date: Fri Jul 28 16:02:42 CST 2017
Android version: 7.0
Resetting FRP lock..
FRP lock is successfully reseted!
 
 

 

OPPO A73 CPH1725 Mở Mạng Qua Teamviewer

 

OPPO F5 CPH1723 Xóa Mã Bảo Vệ Qua Teamviewer

 

Huawei Y6 II CAM-L21 Xóa FRP Qua Teamviewer

 

Unlock - Mở Mạng HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

 

Unlock - Mở Mạng HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

 

Unlock - Mở Mạng HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

 

Xiaomi Redmi Note 5 Xóa Tài Khoản Gmail Thành Công

 

Xiaomi Redmi 4A Remove Mi Account Online

Mã:

@thanhnamPDAviet
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8917.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4A [msm8937]
Software : MMB29M, V8.5.5.0.MCCMIED [Tue Aug 29 11:30:58 WIB 2017]
Android Ver. : 6.0.1
Patch Level : 2017-07-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.

 

OPPO F1W Remove Password - FRP Online

Mã:

@thanhnamPDAviet
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Firehose Loader...Done
Sending Loader [8936_036.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO F1f [msm8916]
Software : F1EX_11_171125, 1481118911 [Sat Nov 25 12:25:36 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.

 

OPPO A71 CPH1801 Remove Password - FRP Online

Mã:

>>>Try connect to mobile...Success
	CPU_SN:  0xB2A7289C
	MSM_ID:  0x0009A0E1
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>Switch mobile to RE\WR ...Success
	Flasy type:  eMMC
>>>>Reading Mobile IMEI Info...Success
	org imei:868499036570179
>>>>Erasing Userdata...
	Corresponding operation completed!!!

 

Vivo V5S Remove Password - FRP Online

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM20
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000E8F800000 -> 59640M
	Flash	 ID: 0x150100524836344D
	Flash   Name: Samsung_Unknow
	Flash symbol: RH64MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM35
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x0113000000	Size(HEX):0x0D7B7FBE00
	Corresponding operation completed!!!
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM20
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000E8F800000 -> 59640M
	Flash	 ID: 0x150100524836344D
	Flash   Name: Samsung_Unknow
	Flash symbol: RH64MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM35
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile account data...
	Corresponding operation completed!!!

 

Vivo Y66 Remove Password - FRP Online

Mã:

@thanhnamPDAviet
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>ÕýÔÚÇл»µ½¶ÁдģʽSuccess
	Flasy type:  eMMC
	Erase Userdata.. Success
>>>all is done
	********************************
	Please disconnect mobile set,and hold vol up and power key
	Mobile will be into recovery
	Click Restart
	********************************
	if mobile hand on logo or auto restart...
	You can in recovery erase data
	After ease data in recovery mobile will working normal

 

Mobistel Cynus F10 Remove Password - FRP Done
Mobistel Cynus F10 Remove Password - FRP By CM2
Mobistel Cynus F10 Remove Password - FRP Online

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 52000115414231337CBF06427DB7DCAA
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BAB13
[eMMC] : FLASH_CID : 15010052333142414206BF7CAADC737D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID	: 0xF85F4F29599B00763A1BC14742E0E363
INT RAM	: 0x00020000
EXT RAM	: 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
 
 
Clear FRP ( Google Reset Protection )
Clear Ok!
 
Done!
 
 
 

 

Xiaomi Redmi 4A (rolex) Remove Mi Account Online

 

OPPO A37F Remove Password - Google Account Online

 

OPPO A71 CPH1801 Remove Password - Google Account Online