Unlock - Mở Khóa HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

OPPO A71 2018 CPH1801 Remove Password - FRP Online

 

OPPO R9S Conver CPH1607 Online

 

OPPO R9m Add Language Vietnam Online

 

OPPO F1S Remove Password - FRP Online

 

Xiaomi Redmi Note 4x miui 9.5.9 Remove Mi Account Online

Mã:

@thanhnamPDAviet
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM49)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20180428154020, V9.5.9.0.NCFMIFA [Sat Apr 28 15:40:18 WIB 2018]
Android Ver. : 7.0
Patch Level : 2018-04-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.

 

Pantech P6030 Unlock Network Done
Pantech P6030 Unlock Network BY Code
Pantech P6030 Unlock Network Online

☯ Nhận Unlock - Mở mạng - Get Code - Repair IMEI - Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

 

Alcatel One Touch Fierce 2 7040N Unlock Network Done
Alcatel One Touch Fierce 2 7040N Unlock Network BY Code
Alcatel One Touch Fierce 2 7040N Unlock Network Online

☯ Nhận Unlock - Mở mạng - Get Code - Repair IMEI - Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

 

Acer Iconia B1-723 Remove FRP Done
Acer Iconia B1-723 Remove FRPBy UMT
Acer Iconia B1-723 Remove FRP Online

☯ Nhận Unlock - Mở mạng - Get Code - Repair IMEI - Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Generic
Operation : MTK FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver. : 0.5
Product : OBAN
Warranty : Yes
Bootloader : Locked
Bootloader is Locked. FRP Reset may fail!
Removing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:06
[Module Ver. 5.0]
Log Saved to Logs\180610_084301.log

 

Vivo V5 Remove Password - FRP Online

 

☯ Nhận Unlock - Mở mạng - Get Code - Repair IMEI - Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

 

Xiaomi Redmi Note 4X Remove Google Account Via Teamviewer

 

OPPO F1W Remove Password - Google Account Via Teamviewer

 

OPPO F3 CPH1609 Remove Password - Google Account Via Teamviewer

 

Mezu Mx5 Remove Password - Flyme Account Via Teamviewer

 

Meizu M3 Note Remove Password - Flyme ID Via Teamviewer

Mã:

	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM27
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000747C00000 -> 29820M
	Flash	 ID: 0x150100525831424D
	Flash   Name: Samsung_Unknow
	Flash symbol: RX1BMB	Get Mobile Port is:  COM34
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EC000000	Size(HEX):0x065ABFBE00
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
 
>>> Swich Mobile to Hight Speed Re\Wr Port...

 

Huawei Y5 (2017) MYA-L02 Mở Mạng Thành Công
Huawei Y5 (2017) MYA-L02 Mở Mạng Bằng NCK
Huawei Y5 (2017) MYA-L02 Unlock Network Via Teamviewer

Nhận Unlock - Mở Mạng - Xóa FRP - Huawei ID MYA-L02
☯ Nhận Unlock - Mở mạng - Get Code - Repair IMEI - Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
 Selected model: Ascend Y5 [MYA-L02]
 Action: Unlock
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek USB Port (COM11)
 Boot mode: Brom
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 [emmi]EMMC CID: 90014a484147346132
 ----------------------------------------------------
 BaseBand CPU :MT6737T
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : FE
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) HYNIX 0x484147346132 
 EMMC FW VERSION: d4:00:00:00:00:00:00:00
 EMMC CID: 90014A484147346132 : 00000000000000
 EMMC UA SIZE: 0x3ab400000	 
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000	  [14.688 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM12)
 -Reading GPT Drive OK
 IMEI[1]: 8626550308
 IMEI[2]: 8626550308
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:255) Code : 0138268451728385 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Unlocked (remain:255) Code : 12345678 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 [SIM_EX_1]Unlocking target...please wait.
 [0]Unlock finished.
 [1]Unlock finished.
 [2]Unlock finished.
 [3]Unlock finished.
 Wait untill phone will start charging.
 All done.

 

Xiaomi Redmi Note 4 (Nikel) Remove Mi Account + Repair IMEI Online

 

Xiaomi Redmi 4x Miui 9 Santoni Remove Mi Account Online

 

Xiaomi Mi A1 8.0 Remove FRP Done
Xiaomi Mi A1 8.0 Remove FRP By UMT
Xiaomi Mi A1 8.0 Remove FRP Online

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Mi A1 [msm8953]
Software : N2G47H.7.12.19, 7.12.19 [Tue Dec 19 10:02:09 WIB 2017]
Android Ver. : 7.1.2
Patch Level : 2017-12-01
Resetting FRP Lock......Done
Operation Finished.

 

Redmi Note 5 Prime Miui 9.5.5 Remove FRP - Mi Account Done
Redmi Note 5 Prime Miui 9.5.5 Remove FRP - Mi Account BY UMT
Redmi Note 5 Prime Miui 9.5.5 Remove FRP - Mi Account Online

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

Mã:

@thanhnamPDAviet
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_003.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937]
Software : N2G47H, V9.5.5.0.NDKMIFA [Wed May  2 10:37:27 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-04-01
Resetting FRP Lock......Done
Operation Finished.

 

Huawei Mate 9 Pro MHA-AL00 Remove Huawei Account Online

Mã:

@thanhnamPDAviet
>>>>Searching mobile phones...
	Get Hisi cpu Mobile Phones...
>>> Get Mobile Port:  COM134
>>>>Device identification : 
	Android Adapter PCUI
>>>>Switch Mobile to Auth Mode
	PCB SN: 7N4KQA176V032761
	Mobile SN:  3HX7N17626004052
	Mobile Code: mission
 
>>>>Ersaeing Mobile accoutn data...
>>>>Doing Factory Reset...Success
	All is done

 

TP-LINK Neffos C5L TP601A Remove FRP Done
Code

Mã:

fastboot erase config

☯ Nhận Unlock ✧ Mở mạng ✧ Xóa FRP ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

 

❤ Nhận Unlock ✧ Mở mạng ✧ Get Code ✧ Repair IMEI ✧ Qua Teamviewer
☎ Hotline : 0966833711 (Zalo + Facebook)
۩۩ Địa Chỉ : 48 Quang Trung - Kinh Môn - Hải Dương

 

Xiaomi Redmi Note 5a Xóa Tài Khoản Xiaomi Thành Công

Mã:

@thanhnamPDAviet
 
Port	: COM33
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1600500 [8917] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8917.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*	: 8917, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 5A [msm8937]
Software	: N2G47H, V8.5.5.0.NDFMIED [Wed Sep 27 21:52:15 WIB 2017]
Android Ver.	: 7.1.2
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
Operation Finished.

 

Xiaomi Redmi 5A Miui 9.5.9 Remove Mi Account Online

Mã:

@thanhnamPDAviet
Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8917.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937]
Software : N2G47H, V9.5.9.0.NCKMIFA [Thu May 10 14:40:15 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-04-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.

 

Xiaomi Redmi Note 3 Pro Miui 9 Remove Mi Account Online

Mã:

>>>Try connect to mobile...Success
CPU_SN: 0x023C6A5F
MSM_ID: 0x009B00E1
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>Switch mobile to RE\WR ...Success
Flasy type: eMMC
>>> Reading Mobile Map Data...Success
>>>>Downloading Unlock File...
Unlock File Download Finish
>>>>Writing Unlock Date...
Start: 0x0x00D4000000 Size: 0x0x0002000000
Success
Corresponding operation completed!!!

 

Xiaomi Redmi 5 Remove Google Account Online

Mã:

@thanhnamPDAviet
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_009.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 16 GB
LU Count : 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953]
Software : N2G47H, V9.5.7.0.NDAMIFA [Fri Apr  6 00:34:31 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-03-01
Resetting FRP Lock......Done
Operation Finished.
 
Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_009.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 16 GB
LU Count : 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953]
Software : N2G47H, V9.5.7.0.NDAMIFA [Fri Apr  6 00:34:31 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-03-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.

 

OPPO A77T Remove Password - OPPO Account BY MRT

Mã:

@thanhnamPDAviet
 
>>>Try connect to mobile...Success
	CPU_SN:  0x3772EF94
	MSM_ID:  0x000460E1
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>Switch mobile to RE\WR ...Success
	Flasy type:  eMMC
>>>>Reading Mobile IMEI Info...Success
	org imei:866194032@thanhnamPDAviet
>>>>Erasing Userdata...
	Corresponding operation completed!!!
 

 

OPPO F5 CPH1723 Remove Password - Google Account Online

 

OPPO F7 CPH1819 Remove Password - Google Account Online

 

Meizu MX6 Remove Password - Flyme Account Online

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM11
>>> Mobile Has Connect...
	CPU_NAME: MT6797
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA01
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
	Make sure Mobile status has in :brom...Success
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000747C00000 -> 29820M
	Flash	 ID: 0x150100424A4E4234
	Flash   Name: Samsung_Unknow
	Flash symbol: BJNB4R
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM12
>>> Reading Mobile Map Data...Success
>>>>Geting Mobile info data...
	ADD(HEX):0x002AA00000	Size(HEX):0x0000700000	
>>>>Writeing Mobile info data...
	SN has Change to :M95HgCPCUY99
>>>>Writeing Mobile info data...
>>>>Writeing Mobile info data...
>>>>Formating Mobile account data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EB800000	Size(HEX):0x065B3FBE00
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

 

Vivo Y69 Remove Password - Google Account Online

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM5
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phon	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000747C00000 -> 29820M
	Flash	 ID: 0x90014A4842473461
	Flash   Name: Hynix_Unknow
	Flash symbol: HBG4a2
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM6
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x0126800000	Size(HEX):0x06203FBE00
	Corresponding operation completed!!!
e...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success

 

Unlock - Mở Mạng HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

 

Unlock - Mở Mạng HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

 

Xiaomi Redmi Note 4 (Nikel) Remove Mi Account Online

Mã:

@thanhnamPDAviet
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 0279[MT6797]
 BV: 02
 SecConf: 00000001
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:preloader
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x200000] size[0x40000]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP	 : MT6797
 CPU ID   : 
 EMMC ID  : 150100414A4E423452075ACBB48A83BB
 EMMC Size: 16GB,  usable capacity: 14.57GB
 EMMC Name: eMMC_Samsung_AJNB4R
 
 Checking imei ...
 
 NVDAT FOUND.
 new imei1: 352596060192@thanhnamPDAviet
 new imei2: 352596060192@thanhnamPDAviet
 Repairing Imei...  Verify Required...
 Updating NVDATA...
 all done ...
 
 Action completed

 

Xiaomi Redmi Note 4 (mido) Remove Mi Account Online

Mã:

@thanhnamPDAviet
Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20180524214626, V9.5.10.0.NCFMIFA [Thu May 24 21:46:24 WIB 2018]
Android Ver. : 7.0
Patch Level : 2018-05-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.

 

OPPO Neo 9 A37FW Remove Lock Screen Online

 

OPPO Neo 9S A39 CPH1605 Repair IMEI Online

Mã:

@thanhnamPDAviet
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CB00
 CPU_ID: 0326[MT6755]
 BV: FE
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:brom
 Init DRAM...
 Waiting for DRAM detection...
 Selected: 2/3	...OK
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x200000] size[0x40000]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP	 : MT6755/6750
 CPU ID   : 
 EMMC ID  : 13014E51334A3937561002EA8A5BA3B3
 EMMC Size: 32GB,  usable capacity: 29.13GB
 EMMC Name: EMMC_Device_Q3J97V
 
 Checking imei ...
 
 NVDAT FOUND.
 new imei1: 352596060192@thanhnamPDAviet
 new imei2: 352596060192@thanhnamPDAviet
 Repairing Imei...  Verify Required...
 
 Warning!!! 
 Disconnect USB Cable From Phone.
 Reconnect Again USB Cable.
 
 Waiting for Phone Usb...
 Process terminated by user.

 

OPPO R9m Add language Vietnam & Google Account Online

 

OPPO F7 CPH1819 Remove Password - FRP Online