Ẩn / Hiện Quảng Cáo

OCTOPLUS Box SAMSUNG-- LG - - SUITE--FRP--JTAG--HUAWEI update new her

Thảo luận trong 'THIẾT BỊ HỖ TRỢ SỬA CHỮA.' bắt đầu bởi namnhatrang, 18/11/16.

  1. 28/8/18 lúc 21:10

    toilatoi142001

    Super Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,418
    Được thích:
    696
    Octoplus FRP Tool v.1.3.9 is out!

    Octoplus FRP Tool v.1.3.9 Release Notes:
    Released general "Spreadtrum Custom" method for "Reset FRP" operation for devices based on Spreadtrum CPUs.
    • This method allows you to perform/test "Reset FRP" operation for Spreadtrum CPUs-based devices which are not present in the software list. To perform the operation just choose "Device vendor: General Reset FRP Methods", then choose "Device model: Spreadtrum Custom", connect the device to PC (if necessary install Spreadtrum driver from the official Octoplus Box site or from the Support Area) and press "Reset FRP" button. Then you need to choose "*.PAC" firmware for your device model ("*.PAC" firmwares contain necessary loaders for device connection) and continue "Reset FRP" operation. If you don’t have proper "*.PAC" firmware exactly for your device model, try choosing "*.PAC" firmware for other device models based on the same Spreadtrum CPU, and try using loaders from these firmwares.

    Added "Reset FRP" for the following devices based on Spreadtrum CPUs:

    • Lava A97
    • Leagoo T5c
    • Lenovo A1000 (thanks to Mr. Xaker2012)
    • Micromax Bolt (Q301)
    • Micromax Bolt (Q3001)
    • Micromax Canvas Spark 3 (Q385)
    • Nomi Evo M (i5010)
    • Prestigio MultiPhone Muze A5 (PSP5502 DUO) (thanks to Mr. Xaker2012)
    • Prestigio MultiPhone Wize N3 (PSP3507 DUO)
    • Prestigio MultiPhone Wize NV3 (PSP3537 DUO)
    • ZTE Blade L110

    Added "Reset FRP" for the following devices:

    • Alcatel Pixi 4 (OT-8050G) (thanks to Mr. elisir)
    • Alcatel Pop 4S (OT-5095I) (thanks to Mr. shabah)
    • Assistant Agio (AS-5432) (thanks to Mr. Rusgard)
    • BLU C5 LTE (OT-8050G) (thanks to Mr. himig_natin)
    • BLU Studio X Mini (thanks to Mr. zaya86)
    • BQ Aquaris E5 (thanks to Mr. shabah)
    • Casper Via A1 (thanks to Mr. a.celal)
    • Cherry Mobile Flare A3 (thanks to Mr. rapidfire_24)
    • Cherry Mobile Flare J3 Lite (thanks to Mr. icecube1982)
    • Cherry Mobile Flare P1 Mini (thanks to Mr. icecube1982)
    • Condor Plume L2 (SP-623) (thanks to Mr. rebainoor)
    • Doogee X50 (thanks to Mr. Rusgard)
    • Elephone S8
    • Hisense Infinity F24 (thanks to Mr. rapidfire_24)
    • Huawei Honor 5A (LYO-L21) (thanks to Mr. rebainoor)
    • Iris Vox Steel Plus (thanks to Mr. starkrimes)
    • Karbonn Titanium Jumbo 2 (thanks to Mr. mr.luckytarun)
    • Lenovo Vibe C (A2020a40) (thanks to Mr. janda)
    • Mediacom PhonePad X500
    • Micromax Canvas Infinity HS2 (thanks to Mr. Pratheesh T K)
    • Motorola Moto E4 Plus (XT1775)
    • MyPhone Hummer Blade (thanks to Mr. Xaker2012)
    • MyPhone Hummer Bolt
    • Nokia 1 (TA-1056) (thanks to Mr. hafiz4saqib)
    • Prestigio MultiPhone Grace R5 (PSP5552 DUO) (thanks to Mr. Surtax)
    • Prestigio MultiPhone Muze C3 (PSP3504 DUO) (thanks to Mr. Xaker2012)
    • Spice F302 (thanks to Mr. Pratheesh T K)
    • Tecno Spark K7 (thanks to Mr. wagonstev)
    • Viwa X2 (thanks to Mr. aminudonats)
    • Wiko Rainbow Lite 4G (thanks to Mr. Rusgard)
    • Wiko U Feel (thanks to Mr. salvo1278)
    • Xiaomi Redmi Note 4 (thanks to Mr. genci titi 2002)

    New Samsung combination firmwares were uploaded into the Support Area
    All supported operations are described in details in Software manual (“Help” button in Software)

    More info and discussion are HERE
    _______________________________________________
    WBR,
    Octoplus Box Team
     
  2. 30/8/18 lúc 22:34

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus JTAG PRO v.1.6.6 is out! Added “Factory Repair” for SPD CPUs-based devices, support for new devices, new USB loaders and more!

    Released “Factory Repair” operation via eMMC for Spreadtrum CPUs-based devices (direct writing of “*.PAC” firmwares).

    Added support for InFocus M370i, Huawei Y625-U21, Xiaomi Redmi Y1 Lite via USB, and support for Alcatel 5022D, LG D415, LG K520, LG LMX210ULMA, LG M150, LG SP320, LG US601, Motorola XT1762, Motorola XT1100, Samsung SM-A500H, Samsung SM-J200G, Samsung SM-J500G, Samsung SM-N7505 and Sony E5533 via eMMC.

    25+ new unique Qualcomm USB loaders were added to Software Loaders’ Data Base.

    New “Live logs” uploaded into the Support Area.


    Octoplus JTAG PRO Software v.1.6.6 Release Notes:

    • Released “Factory Repair” operation via eMMC for Spreadtrum CPUs-based devices.

    With this feature you can try to repair devices, based on Spreadtrum CPUs by using original “*.PAC” firmwares. This feature can be useful in case if you don’t have the same operating device to create Boot Repair file, or device you want to repair currently is not supported.

    • Added support for the following models via eMMC:
    • Alcatel 5022D - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D415 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • LG K520 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LMX210ULMA - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG M150 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Quetzaltloani)
    • LG SP320 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG US601 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1762 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-A500H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • Samsung SM-J200G - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • Samsung SM-J500G - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • Samsung SM-N7505 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Paappan Mobiles)
    • Sony E5533 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • Added support for the following models via USB:
    • InFocus M370i - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Pijush Das)
    • Huawei Y625-U21 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • Xiaomi Redmi Y1 Lite (Model MDI6) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Pijush Das)
    • 25+ new unique Qualcomm USB loaders were added to Software Loaders’ Data Base!
    • Improved Resize/Repartition in Samsung Factory Repair operation. (thanks to Mr. andrei_d1978)
    • New “Live logs” uploaded into the Support Area.
    • Some adjustments and improvements were made.
    • All pinouts and repair procedures are described in the manual ("Help" button in the software).



    [​IMG]
     
  3. 5/9/18 lúc 21:10

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus FRP Tool v.1.4.0 is out! Support for new devices has been added!


    Octoplus FRP Tool v.1.4.0 Release Notes:

    Added "Reset FRP" for the following devices based on Spreadtrum CPUs:
    • Archos Core 57S (AC55CRS)
    • BLU Advance 4.0 L3 (thanks to Mr. zaya86)
    • BQ Choice (5340) (thanks to Mr. Zelekxxx)
    • Condor Griffe G5 (PHQ-520) (thanks to Mr. DZ_DEVELOPER)
    • Condor Griffe T1 (SP-413) (thanks to Mr. DZ_DEVELOPER)
    • Condor Griffe T2 (SP-530) (thanks to Mr. DZ_DEVELOPER, rebainoor)
    • Condor Griffe T3 (SP-414) (thanks to Mr. DZ_DEVELOPER, lyes_albert)
    • Echo Plum (thanks to Mr. lyes_albert)
    • Itel A21 (thanks to Mr. muskaangarg)
    • Itel A40 (thanks to Mr. Wasim007)
    • Texet TM-5073 (thanks to Mr. Zelekxxx)

    Added "Reset FRP" for the following devices:
    • Archos Access 55 3G (AC55AS3G) (thanks to Mr. artankrasniqi)
    • Asus ZenFone 5 ZE620KL (X00QD) (thanks to Mr. wohlstand)
    • Bjorn Lark (SP500) (thanks to Mr. KubaIV)
    • Blackfox B3Fox+ (BMM541D) (thanks to Mr. desudaff)
    • BLU Energy X Plus 2 (thanks to Mr. zaya86)
    • BLU Grand X LTE (thanks to Mr. himig_natin)
    • BLU Studio 7.0 LTE
    • BLU Studio One (thanks to Mr. zaya86)
    • BLU Touchbook M7 Pro (thanks to Mr. zaya86)
    • BQ Strike Forward (5512L) (thanks to Mr. zorgy_1979)
    • Bravis Joy MAx (A552) (thanks to Mr. spiridvvv)
    • Cherry Mobile Omega Icon 2 (thanks to Mr. rapidfire_24)
    • Condor Allure M3 (SP-627) (thanks to Mr. DZ_DEVELOPER)
    • Condor Plume L1 Plus (SP-624) (thanks to Mr. DZ_DEVELOPER)
    • Condor Plume L3 (SP-625) (thanks to Mr. DZ_DEVELOPER)
    • Condor TB-717G (thanks to Mr. DZ_DEVELOPER)
    • Condor TGW-710G (thanks to Mr. DZ_DEVELOPER)
    • Cubot Note S (thanks to Mr. KubaIV)
    • Echo Studio (thanks to Mr. YASS YASS)
    • Figo Atrium II (F55L2) (thanks to Mr. himig_natin)
    • Fly Nimbus 7 (FS505) (thanks to Mr. SurTaX)
    • Infinix Hot S (X521) (thanks to Mr. wagonstev)
    • Infinix Smart 2 (X5515) (thanks to Mr. coolwaindo)
    • Intex Aqua Trend Lite (thanks to Mr. muskaangarg)
    • Invens Fighter (thanks to Mr. pintu_das)
    • Iris IS2 Plus (thanks to Mr. lyes_albert)
    • Iris Vox Pop Plus (thanks to Mr. Starkrimes)
    • Lava Z50 (thanks to Mr. pandoragsm)
    • MiONE R5 (thanks to Mr. pintu_das)
    • Mobicel Vivo (thanks to Mr. lyes_albert)
    • Motorola Nexus 6 (XT1103)
    • Motorola Moto Z (XT1650-01)
    • Panasonic P85 (thanks to Mr. Pratheesh T K)
    • Prestigio MultiPad Grace 3118 3G (PMT3118_3G) (thanks to Mr. smit29rus)
    • S-Tell P771
    • Starlight Madrid (thanks to Mr. rebainoor)
    • Tecno Cammon C9 (thanks to Mr. wagonstev)
    • Tecno Cammon CX (thanks to Mr. mobiserv_iasi)
    • Walton Primo GH7 (thanks to Mr. .::Gsm-Play::.)
    • ZTE Blade A6 Lite (A0622) (thanks to Mr. Usmanov Rustam)
    • ZTE Blade A610C (thanks to Mr. Usmanov Rustam)
    • ZTE Blade V0730
    • ZTE Blade V8 (V0800) (thanks to Mr. Usmanov Rustam)
    • ZTE Prestige 2 (N9136) (thanks to Mr. ramon9622)

    New Samsung combination firmwares were uploaded into the Support Area

    All supported operations are described in details in Software manual (“Help” button in Software)
    Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!
    Download Octoplus FRP Tool v.1.4.0
     
  4. 6/9/18 lúc 22:33

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus JTAG PRO v.1.6.7 is out! Added support for new devices, new USB loaders and more!

    Added support for Lenovo X3a40 via USB, and support for BQ Aquaris X5 Plus, ZTE Z978, LG SP200, ZTE L110, Micromax Q301, Prestigio PSP3507DUO, Lenovo S90-A, Huawei CHC-U01, OPPO A1601 and Samsung G570F via eMMC.

    New Qualcomm USB loaders were added to Software Loaders’ Data Base.

    New “Live logs” uploaded into the Support Area.


    Octoplus JTAG PRO Software v.1.6.7 Release Notes:

    Added support for the following models via eMMC:
    • BQ Aquaris X5 Plus - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei CHC-U01 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • Lenovo S90-A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG SP200 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Micromax Q301 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • OPPO A1601 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • Prestigio PSP3507DUO - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung G570F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • ZTE Z978 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE L110 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    Added support for the following models via USB:
    • Lenovo X3a40 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    New unique Qualcomm USB loaders were added to Software Loaders’ Data Base!

    New “Live logs” uploaded into the Support Area.

    Some adjustments and improvements were made.

    All pinouts and repair procedures are described in the manual ("Help" button in the software).



    [​IMG]

     
  5. 14/9/18 lúc 09:16

    toilatoi142001

    Super Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,418
    Được thích:
    696
    Octoplus FRP Tool v.1.4.1 is out!

    Octoplus FRP Tool v.1.4.1 Release Notes:
    Added "Reset FRP" for the following devices:
    • Alcatel Pixi 4 (4.0) (OT-4034X) (thanks to Mr. jseyedanas)
    • Allview P42 (thanks to Mr. BGSBUL)
    • Archos Access 50 Color 3G (AC50ASCLR3G) (thanks to Mr. Remco)
    • BLU Studio C HD (thanks to Mr. zaya86)
    • BQ Trend (5009L) (thanks to Mr. Faruxchik)
    • Cherry Mobile Flare A1 (thanks to Mr. icecube1982)
    • Cherry Mobile Flare J3 (thanks to Mr. rapidfire_24)
    • Cubot Max (thanks to Mr. sbata-team)
    • Dexp Ixion G155 (thanks to Mr. Surtax)
    • Doogee X7 S (thanks to Mr. soulay)
    • Ergo Maximum (B501) (thanks to Mr. Xaker2012)
    • Figo Atrium 5.5 (F55L) (thanks to Mr. himig_natin)
    • Figo Orion (M50L) (thanks to Mr. himig_natin)
    • Fly Nimbus 8 (FS454 SPRD) (thanks to Mr. Xaker2012)
    • Fly Nimbus 8 (FS454 MTK) (thanks to Mr. zorgy_1979)
    • Huawei Mate 10 (ALP-L09) - via ADB method
    • Impression ImPAD M701 (thanks to Mr. Xaker2012)
    • Kiowa S5 Ultra (thanks to Mr. FayGsmDZ)
    • LG G7 ThinQ (G710AWMH) (via Test Point)
    • LG G7 ThinQ (G710EM) (via Test Point)
    • LG G7 ThinQ (G710EMW) (via Test Point)
    • Echo Studio (thanks to Mr. YASS YASS)
    • MLS R3 iQR300 (thanks to Mr. Unlocker AL)
    • Mobicel V2 LTE
    • MyPhone C-Smart II (thanks to Mr. Xaker2012)
    • MyPhone MyA10 (thanks to Mr. rapidfire_24)
    • Nomi Corsa 3 (C070012)
    • Nomi Evo X (i5030)
    • Nomi Beat M (i4510) (thanks to Mr. rusgard)
    • Oukitel K6000 Pro
    • Panasonic P71 (thanks to Mr. kapilanand11)
    • Prestigio MultiPhone Muze B7 (PSP7511 DUO) (thanks to Mr. janda)
    • QMobile King Kong Max (thanks to Mr. Ismail khan1978)
    • Samsung Galaxy J7 (SM-J727A)
    • Starlight Future (thanks to Mr. lyes_albert)
    • Vivo Y71 (1724) (thanks to Mr. Ismail khan1978)
    • Vodafone Tab Mini 7 (VFD1100) (thanks to Mr. pintu_das)
    • ZTE Blade A520C (A520C) (thanks to Mr. Usmanov Rustam)
    • ZTE Blade A610 (A610) (thanks to Mr. zorgy_1979)
    • ZTE Blade V8 Mini (V0850) (thanks to Mr. Usmanov Rustam)
    • ZTE Quest Plus (Z3001S) (thanks to Mr. diazdetail626)
    Improved "Reset FRP" operation for Condor Plume P8 Pro (SP-621) (thanks to Mr. MDK23)
    All supported operations are described in details in Software manual (“Help” button in Software)
    New Samsung combination firmwares were uploaded into the Support Area

    More info and discussion are HERE

    _______________________________________________
    WBR,
    Octoplus Box Team
     
  6. 20/9/18 lúc 20:21

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus FRP Tool v.1.4.2 is out! Added OnePlus 6, Xiaomi Redmi S2 and more!


    Octoplus FRP Tool v.1.4.2 Release Notes:
    Added "Reset FRP" for the following devices:
    • Alcatel A3A Plus / 3X (OT-5058A)
    • Alcatel A3A Plus / 3X (OT-5058I)
    • Alcatel A3A Plus / 3X (OT-5058J)
    • Alcatel A3A Plus / 3X (OT-5058T)
    • Alcatel A3A Plus / 3X (OT-5058Y) (thanks to Mr. redpig)
    • Altice StarXtrem 6 (thanks to Mr. rebainoor)
    • Asus ZenFone Live L1 ZA550KL (X00RD) (thanks to Mr. smit29rus)
    • BLU Grand X (thanks to Mr. zaya86)
    • BLU Grand XL LTE (thanks to Mr. himig_natin)
    • BLU Studio J2 (thanks to Mr. zaya86)
    • Bravis A501 Bright (thanks to Mr. Xaker2012)
    • Caterpillar CAT S40 (thanks to Mr. Arty)
    • Condor Griffe G6 (PHQ-525) (thanks to Mr. DZ-DEVELOPER)
    • Condor Tab (TB-717L) (thanks to Mr. DZ-DEVELOPER)
    • Coolpad Cool 1 (C1-U02)
    • Dexp Ixion ML350 (thanks to Mr. Surtax)
    • Doogee Shoot 1 (thanks to Mr. zorgy_1979)
    • Doogee X53 (thanks to Mr. Xaker2012)
    • Eurostar Onyx-3S LTE (thanks to Mr. gsmkashmir)
    • Figo Atrium 5.5 (F55L) (thanks to Mr. himig_natin)
    • Figo Orion (M50L) (thanks to Mr. himig_natin)
    • Fly Nimbus 9 (FS509) (thanks to Mr. Xaker2012)
    • General Mobile 4G (thanks to Mr. Unlocker AL)
    • Hisense L830 (thanks to Mr. rebainoor)
    • Infinix Hot 4 (X557) (thanks to Mr. lyes_alber)
    • Insignia NS-P11A8100 (thanks to Mr. Arty)
    • Leagoo KIICAA Mix (thanks to Mr. Usmonov Rustam)
    • LeRee Le 3 (C1-U02)
    • Mobicel Astro (thanks to Mr. usman0000, SeharH, umerkhalid1992)
    • Motorola Moto Z (XT1650-03) (thanks to Mr. ppdavisito)
    • Nomi Evo Z (i5050) (thanks to Mr. rusgard)
    • ❕OnePlus 6 (A6000) (thanks to Mr. heramiah)
    • ❕OnePlus 6 (A6003)
    • Oukitel U7 Plus (thanks to Mr. genci titi 2002)
    • Q-smart MB5015 (MB5015) (thanks to Mr. Xaker2012)
    • Tecno WX3 (thanks to Mr. pintu_das)
    • TurboX A3 (thanks to Mr. genci titi 2002)
    • Vodafone Smart C9 / N9 Lite (VFD320) (thanks to Mr. coolwaindo)
    • Walton Primo GM3 (thanks to Mr. pintu_das)
    • ❕Xiaomi Redmi S2
    Improved Reset FRP for Xiaomi Redmi Note 5 (new Qualcomm loader added).
    Improved manuals for Condor devices (thanks to Mr. DZ-DEVELOPER).
    New Samsung Combination firmwares were uploaded into the Support Area.
    New unique Qualcomm USB loaders were added to Software Loaders’ Data Base.
    All supported operations are described in details in Software manual (“Help” button in Software)
    Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!
    Download Octoplus FRP Tool v.1.4.2
     
  7. 21/9/18 lúc 20:45

    CuDuy-VF

    Super Moderator

    CuDuy-VF
    Tham gia:
    23/1/07
    Bài viết:
    2,580
    Được thích:
    891
    Octoplus/Octopus Box LG v.2.8.9 is out!

    [​IMG]
    Octoplus/Octopus Box LG Software version 2.8.9 is out! Added world's first support for G7 ThinQ, V35 ThinQ, X2 2018 series and more!
    Octoplus/Octopus Box LG Software v.2.8.9 Release Notes:

    Added support for the following models:
    - G710AWMH - added world's first Write Firmware (“*.kdz”, “*.oct”), Reset FRP*, Read/Write QCN, Read/Write NVM, Factory Reset
    - G710EM - added world's first Write Firmware (“*.kdz”, “*.oct”), Reset FRP*, Read/Write QCN, Read/Write NVM, Factory Reset
    - G710EMW - added world's first Write Firmware (“*.kdz”, “*.oct”), Reset FRP*, Read/Write QCN, Read/Write NVM, Factory Reset
    - V350AWM - added world's first Write Firmware (“*.kdz”, “*.oct”), Reset FRP*, Read/Write QCN, Read/Write NVM, Factory Reset
    - V350ULM - added world's first Write Firmware (“*.kdz”, “*.oct”), Reset FRP*, Read/Write QCN, Read/Write NVM, Factory Reset
    - LMX210IMW - added Unlock, Repair IMEI (A/B), Write Firmware, Reset FRP, Read/Write/Reset Security, Read/Write QCN, Read/Write NVM, Read Full Flash
    - X210K - added world's first Unlock, Repair IMEI, Write Firmware, Reset FRP, Read/Write/Reset Security, Read/Write QCN, Read/Write NVM, Read Full Flash
    - X210L - added world's first Unlock, Repair IMEI, Write Firmware, Reset FRP, Read/Write/Reset Security, Read/Write QCN, Read/Write NVM, Read Full Flash
    - X210S - added world's first Unlock, Repair IMEI, Write Firmware, Reset FRP, Read/Write/Reset Security, Read/Write QCN, Read/Write NVM, Read Full Flash
    - VS987 - added Write Firmware
    - VS988 - added Write Firmware
    *: via Test Point, all firmware versions and latest security patch levels are supported, Test Point picture is included in Software manual.
    Improved Write Firmware for LG Q6 M700 series.

    Improved Reset FRP for SP200.

    All supported operations are described in details in Software manual ("Cable & Manual" button in Software)

     
  8. 27/9/18 lúc 21:05

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus FRP Tool v.1.4.3 is out! Massive update! Many new devices added!


    Octoplus FRP Tool v.1.4.3 Release Notes:
    Added "Reset FRP" for the following devices:
    • Alcatel OneTouch Idol 3 5.5 (OT-6045O) (thanks to Mr. chipscell25)
    • Alcatel OneTouch Pop 3 5 (OT-5015X) (thanks to Mr. rusgard)
    • Altice T10 (thanks to Mr. stopcell)
    • Asus ZenFone V Live LTE V500KL (A009) (thanks to Mr. Arty)
    • Blackview BV2000s (thanks to Mr. zaya86)
    • BLU R2 LTE (thanks to Mr. zaya86)
    • BLU Studio G Mini (thanks to Mr. himig_natin)
    • BLU Studio Selfie 2 (thanks to Mr. daryl007)
    • BQ 5032 (thanks to Mr. Usmanov Rustam)
    • Caterpillar CAT S41 (thanks to Mr. iffipower)
    • CG EON Curve (thanks to Mr. amar181)
    • Cubot Cheetah 2 (thanks to Mr. dragosgsm)
    • Cubot King Kong (thanks to Mr. Xaker2012)
    • Doogee T5
    • Energy Phone Max 4G (thanks to Mr. yagui)
    • Geotel Note (thanks to Mr. Starkimes)
    • GSmart Classic Joy
    • HighScreen Easy XL Pro (thanks to Mr. Usmanov Rustam)
    • Hisense T5 Plus (thanks to Mr. CHAUDHRAY ARSHAD)
    • Infinix Note 3 (X601) (thanks to Mr. Arnoldsp)
    • Irbis TZ55 (thanks to Mr. Usmanov Rustam)
    • Itel Selfie Pro (i1520) (thanks to Mr. kapilanand11)
    • Leagoo M8 Pro (thanks to Mr. Usmanov Rustam)
    • Leagoo T1 (thanks to Mr. Unlocker AL)
    • LG K9 2018 / Candy (LMX210IMW)
    • LG V35 ThinQ (V350AWM) (via TP)
    • LG V35 ThinQ (V350ULM) (via TP)
    • LG X2 (X210K)
    • LG X2 (X210L)
    • LG X2 (X210S)
    • M4Tel M4 SS4457 (thanks to Mr. daryl007)
    • Micromax Bharat 5 (thanks to Mr. kapilanand11)
    • Mobicel Pure Plus (thanks to Mr. CHAUDHRAY ARSHAD)
    • Mobicel Pure Mini (thanks to Mr. Safyan sufi)
    • Mobicel Tango Lite (thanks to Mr. Safyan sufi)
    • Motorola Moto E4 (XT1760) (thanks to Mr. amancommunicati)
    • MyPhone Q-Smart III (thanks to Mr. Smart144)
    • OnePLus 3 (A3000) (thanks to Mr. CHAGUA)
    • Tecno WX3 (thanks to Mr. pintu_das)
    • Philips S318 (thanks to Mr. Faruxchik)
    • Premio P610 (thanks to Mr. CHAUDHRAY ARSHAD)
    • Samsung Galaxy J7 Prime 2 (SM-G611FF) (thanks to Mr. Unlocker AL)
    • Senseit A250 (thanks to Mr. Faruxchik)
    • Symphony R20 (thanks to Mr. pintu_das)
    • Symphony R30 (thanks to Mr. pintu_das)
    • Symphony V110 (thanks to Mr. pintu_das)
    • Turk Telekom TT175 (thanks to Mr. a.celal)
    • Vernee Apollo (thanks to Mr. rebainoor)
    • Vivo V5 (1601) (thanks to Mr. Ismail Khan1978)
    • Vodafone Smart Kicka VE (VFD100) (thanks to Mr. Safyan sufi)
    • Wiko Freddy (thanks to Mr. Xaker2012)
    • Xiaomi Mi 5 (thanks to Mr. Xaker2012)
    • ZTE Blade V580
    Improved Reset FRP for ZTE Blade V8 Lite (V0820) (thanks to Mr. HiryrGGSM).
    New Samsung Combination firmwares were uploaded into the Support Area.
    New unique Qualcomm USB loaders were added to Software Loaders’ Data Base.
    All supported operations are described in details in Software manual (“Help” button in Software)
    Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!
    Download Octoplus FRP Tool v.1.4.3
     
  9. 27/9/18 lúc 21:06

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus / Octopus Box Samsung Software v.2.7.2 is out! Added Read Codes (via server) for Galaxy A6+ 2018, A8/A9 Star and more!

    Added Read Codes (via server) for Samsung Galaxy A6+ 2018, S Lite, A8 Star, A9 Star and On8 2018 series, based on Qualcomm CPUs.

    Added Read Codes (via server) for Samsung Galaxy Galaxy J2 Core 2018 series, based on Exynos CPUs.

    Improved Read Codes operation (added support for latest firmwares) for Galaxy J2 2018, S7, S7 Edge, S7 Active, S8 Active series, based on Qualcomm CPUs.

    Octoplus / Octopus Box Samsung Software v.2.7.2 Release Notes:
    Added support for the following models:
    - SM-A6050 - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-A605F - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-A605FN - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-A605G - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-A605GN - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode

    - SM-G8750 - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode

    - SM-G8850 - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-G8858 - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode

    - SM-G885F - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-G885S - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-G885Y - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode

    - SM-J810F - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-J810G - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-J810M - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-J810Y - added Read Codes (via server), Read/Write NVM, Read/Write EFS, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode

    - SM-J260F - added Read Codes (via server), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-J260G - added Read Codes (via server), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-J260M - added Read Codes (via server), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode
    - SM-J260Y - added Read Codes (via server), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware, Reboot in Download/Recovery mode

    - SM-J327P (Sprint) - added Unlock

    - SM-J727PP (Sprint) - added Unlock​
    Improved Read Codes operation (updated new MSM Crypto algorithm) for the following devices:
    - SM-G9500, SM-G9508, SM-G950U, SM-G950U1, SM-G950W
    - SM-G9550, SM-G9558, SM-G955U, SM-G955U1, SM-G955W
    - SM-J250F, SM-J250G, SM-J250M, SM-J250N, SM-J250Y
    - SM-G930A, SM-G930AZ
    - SM-G935A, SM-G935AZ
    - SM-G891A
    - SM-G892A
    Many new Samsung Combination firmwares were uploaded into the Support Area.
    All supported operations described in details in the manual ("Cable & Manual" button in the software).

    Note: please always use the latest Software version.

    Also note: if you have any problem with Read Codes operation, please contact us on Skype, you can find our contact info in our profile.

    For more detailed information about prices, please check Octoplus Credits Consumption


    [​IMG]
     
  10. 4/10/18 lúc 21:49

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus JTAG PRO v.1.6.8 is out! New models and new loaders added!

    Added support for Alcatel Jitterbug Smart A622GL, Hisense Altice StarXtrem 6, Huawei VNS-AL00, LG G710EMW, LG V350AWM, Oppo A33F, Wiko WIM Lite, Xiaomi Redmi 3S (Model-2016037) via USB, and support for HTC Desire 826, Lenovo A1000, LG LS676 and Sony E5533 via eMMC.

    Added new Qualcomm USB Loaders for different vendors' devices to the Software list and to Software Loaders’ Data Base.

    New “Live logs” uploaded into the Support Area.


    Octoplus JTAG PRO Software v.1.6.8 Release Notes:

    Added support for the following models via eMMC:
    • HTC Desire 826 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo A1000 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • LG LS676 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony E5533 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via USB:
    • Alcatel A622GL (Jitterbug Smart) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. rebainoor)
    • Hisense Altice StarXtrem 6 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. rebainoor)
    • Huawei VNS-AL00 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)
    • LG G710EMW - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG V350AWM - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Oppo A33F - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. rebainoor)
    • Wiko WIM Lite - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Redmi 3S (Model-2016037) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Pijush Das)
    Added new unique Qualcomm USB Loaders to the list of Software and to Software Loaders’ Data Base (Read/Write/Full erase operations are supported) for the next vendors' devices:
    • Asus - added loader for MSM8917
    • Coolpad - added loaders for MSM8916
    • LG - added support and loader for SDM845
    • TCL - added loader for MSM8936
    • ZTE - added loaders for MSM8936 and MSM8952
    Added common (general) Qualcomm USB loaders for MSM8916 and MSM8937.
    New “Live logs” uploaded into the Support Area.
    Some adjustments and improvements were made.
    All pinouts and repair procedures are described in the manual ("Help" button in the software).

    [​IMG]
     
  11. 4/10/18 lúc 21:51

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus FRP Tool v.1.4.4 is out! Many new devices added to the list of supported!


    Octoplus FRP Tool v.1.4.4 Release Notes:
    Added "Reset FRP" for the following devices:
    • Acer Iconia One 10 (B3-A40) (thanks to Mr. gerovgsm, rebainoor)
    • Acer Liquid Zest (T06) (thanks to Mr. katitous)
    • AGM A8 (thanks to Mr. 8965)
    • Alcatel 1X (OT-5059D) (thanks to Mr. Surtax)
    • Amgoo AM410 (thanks to Mr. apostrofe)
    • Asus ZenFone Max M1 ZB555KL (thanks to Mr. shoxa907)
    • Attila Mate Pro (thanks to Mr. rebainoor)
    • Blackview BV6000 (thanks to Mr. Faruxchik)
    • BLU Dash XL (thanks to Mr. elisir)
    • BLU Grand XL (thanks to Mr. daryl007)
    • BLU Studio G2 (thanks to Mr. daryl007)
    • BLU Studio G3 (thanks to Mr. daryl007)
    • BLU Studio J8 (thanks to Mr. daryl007, himig_natin)
    • BLU Studio Pro (thanks to Mr. Meret83)
    • BLU Studio Selfie (thanks to Mr. daryl007)
    • BMobile AX1070 (thanks to Mr. daryl007)
    • BQ UP (4028) (thanks to Mr. Faruxchik)
    • Cherry Mobile FB100 (thanks to Mr. icecube1982)
    • Cobalt T7 Wi-Fi (thanks to Mr. djuice)
    • Condor Griffe G6 Pro (PHQ-526) (thanks to Mr. Starkimes)
    • Coolpad Cool1 (C106-9) (thanks to Mr. Faruxchik)
    • Danew Konnect 402 (thanks to Mr. lyes_albert)
    • Dexp Ixion ML150 (thanks to Mr. UzUnlocker)
    • Digma Linx C500 3G (thanks to Mr. Xaker2012)
    • Doogee S60 (thanks to Mr. Skaza)
    • Enie E3 (thanks to Mr. Starkrimes)
    • Fly Power Plus (FS554) (thanks to Mr. Usmanov Rustam)
    • Greentel G9 (thanks to Mr. shremal)
    • IGO Flair (thanks to Mr. CHAUDHRAY ARSHAD)
    • Itel P32 (thanks to Mr. pintu_das)
    • Huawei Y6 Pro / Titan (TIT-U02 V2) (thanks to Mr. CHAUDHRAY ARSHAD)
    • Leagoo Z5c (thanks to Mr. Xaker2012)
    • LeEco Cool1 C106-9 (thanks to Mr. Faruxchik)
    • LeEco Le 2 (X527) (thanks to Mr. Faruxchik)
    • LG K10 (K430Y) (thanks to Mr. daryl007)
    • Meizu M2 (thanks to Mr. Xaker2012)
    • Meizu M8c (M810H) (thanks to Mr. Xaker2012)
    • Mobicel Ultra (thanks to Mr. shahbaz139)
    • Mobicel V4 (thanks to Mr. farhankhan377, BraveNewWorld)
    • Mobicel X4 (thanks to Mr. Safyan sufi, BraveNewWorld)
    • Navon Supreme Fine Mini (thanks to Mr. djuice)
    • Nokia 2 (TA-1007) (thanks to Mr. BGSBUL)
    • Panasonic Eluga A2 (thanks to Mr. a.celal)
    • Panasonic Eluga I9 (thanks to Mr. muskaangarg)
    • Prestigio MultiPad Grace 8 3G (PMT3318 3G) (thanks to Mr. zorgy_1979)
    • Sky Platinum 4.0 (thanks to Mr. daryl007)
    • Smartex M512 (thanks to Mr. fedja)
    • Tecno Camon X (CA7) (thanks to Mr. Arnoldsp)
    • Tecno RA6s (thanks to Mr. coolwaindo)
    • Ulefone S8 (thanks to Mr. Faruxchik)
    • Wiko Pulp 3G (thanks to Mr. Starkrimes)
    • Wiko U Pulse Lite (thanks to Mr. jseydanas)
    • Wileyfox Swift (thanks to Mr. Faruxchik)
    • Xiaomi Mi Max 2 (thanks to Mr. gfxz)
    • ZTE Blade A602 (thanks to Mr. daryl007)
    New Samsung Combination firmwares were uploaded into the Support Area.
    New unique Qualcomm USB loaders were added to Software Loaders’ Data Base.
    All supported operations are described in details in Software manual (“Help” button in Software)
    Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!
    Download Octoplus FRP Tool v.1.4.4
     
  12. 5/10/18 lúc 20:00

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus / Octopus Box Samsung Software v.2.7.3 is out! Added Note 9 TMB Unlock and more!

    Added Unlock (via server) for Samsung Note 9 TMB.

    Added Read Codes (via server) for Samsung Galaxy J3 2017/Galaxy J7 Prime 2/Wide 2 series, based on Exynos CPUs.

    Improved TMB Unlock (via server) operation (for latest firmware versions: from now on no need to write modem from combination firmware) for TMB Note 8, S8, S9 and S9+ series.

    Improved Read Codes (via server) operation (added support for latest firmwares) for Note 8, S8 and S8+ series, based on Qualcomm CPUs.

    Octoplus / Octopus Box Samsung Software v.2.7.3 Release Notes:
    Added support for the following models:
    - SM-N960U (TMB) - added Unlock (via server), Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-N960U1 (TMB) - added Unlock (via server), Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode

    - SM-G611FF - added Read Codes (via server), Read/Write EFS, Read/Write Security, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J727S - added Read Codes (via server), Reset FRP (via ADB), Read/Write EFS, Read/Write Security, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J330GM - added Unlock (via server, any KNOX), Read Codes (via server), Reset FRP (via ADB), Read Cert, Read/Write EFS, Read/Write Security, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J330L - added Unlock (via server, any KNOX), Read Codes (via server), Reset FRP (via ADB), Read Cert, Read/Write EFS, Read/Write Security, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J330N - added Unlock (via server, any KNOX), Read Codes (via server), Reset FRP (via ADB), Read Cert, Read/Write EFS, Read/Write Security, Read PIT, Write Firmware, Reboot in Recovery/Download mode​
    Improved TMB unlock (via server) operation (for latest firmware versions: from now on no need to write modem from combination firmware) for the following TMB devices:
    - SM-N950U, SM-N950U1
    - SM-G950U, SM-G950U1
    - SM-G955U, SM-G955U1
    - SM-G960U, SM-G960U1
    - SM-G965U, SM-G965U1
    Improved Read Codes (via server, via UploadMode) operation (added support for BIT5 firmwares) for the following devices:
    - SM-N950U, SM-N950U1
    - SM-G950U, SM-G950U1
    - SM-G955U, SM-G955U1
    Many new Samsung Combination firmwares were uploaded into the Support Area.
    All supported operations described in details in the manual ("Cable & Manual" button in the software).
    Note: Please, always use the latest Software version.

    Also note: If you have any problems with Read Codes operation, please contact us on Skype, you can find our contact info in our profile.

    For more detailed information about prices, please check Octoplus Credits Consumption.


    [​IMG]
     
  13. 11/10/18 lúc 23:19

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus/Octopus Suite v.1.5.8 is out! Added TMB Galaxy Note 9 Unlock, Read Codes for many new devices!
    Octoplus/Octopus Suite v.1.5.8 Release Notes:

    Added TMB Unlock (via server) for TMB Samsung Galaxy Note 9 SM-N960U and SM-N960U1.
    Added Read Codes (via server) for the following models:

    • SM-A6050, SM-A605F, SM-A605FN, SM-A605G, SM-A605GN
    • SM-G570F, SM-G570FD, SM-G570M, SM-G570MD, SM-G570Y
    • SM-G8750
    • SM-G8850, SM-G8858, SM-G885F, SM-G885S, SM-G885Y
    • SM-J260F, SM-J260G, SM-J260M, SM-J260Y
    • SM-J330GM, SM-J330L, SM-J330N
    • SM-J336AZ, SM-J337A, SM-J337AZ (read for 16 digits code)
    • SM-J415F, SM-J415FN, SM-J415G
    • SM-J720F, SM-J720M
    • SM-J727A, SM-J727AZ, SM-J727S
    • SM-J737A
    • SM-J810F, SM-J810G, SM-J810M, SM-J810Y
    • SM-N960F, SM-N960FD, SM-N960N
    Improved Read Codes (via server, via UploadMode) operation (added support for BIT5 firmwares) for the following devices:
    • SM-N950U, SM-N950U1
    • SM-G950U, SM-G950U1
    • SM-G955U, SM-G955U1
    Improved TMB unlock (via server) operation (for the latest firmware versions: from now on no need to write modem from combination firmware) for the following TMB devices:
    • SM-N950U, SM-N950U1
    • SM-G950U, SM-G950U1
    • SM-G955U, SM-G955U1
    • SM-G960U, SM-G960U1
    • SM-G965U, SM-G965U1
    Note: Please, always use the latest Software version.

    Also note: If you have any problems with Read Codes operation, please contact us on Skype, you can find our contact info in our profile.

    Latest information is available here.

    You can buy Octopus/Octoplus Server Credits from your local reseller or directly HERE.

    How to perform "Read Codes" operation:
    • Select proper model from the list in the Software
    • Install Samsung ADB drivers
    • Connect the device to PC via USB cable
    • Enable ADB
    • Press "Read Codes" button


     
  14. 11/10/18 lúc 23:22

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus FRP Tool v.1.4.5 is out! A lot of new devices added to the list of supported!


    Octoplus FRP Tool v.1.4.5 Release Notes:
    Added "Reset FRP" for the following devices:
    • Acer Iconia One 7 (B1-780) (thanks to Mr. BGSBUL)
    • Acer Talk S (A1-734) (thanks to Mr. gfxz)
    • Alcatel OneTouch Pop 3 (OT-5015D) (thanks to Mr. genci titi 2002)
    • Alcatel OneTouch Pixi 4 (4.0) (OT-4034G) (thanks to Mr. windowshu)
    • BLU Studio XL 2 (thanks to Mr. Ayan649)
    • BQ Aquaris M8 (thanks to Mr. NEOCRIVI)
    • Bravis NB105 (thanks to Mr. Xaker2012)
    • CG EON Blaze Pro (thanks to Mr. amar181)
    • Coolpad Torino S (E561) (thanks to Mr. Alexbig)
    • D-Tech D5-S (thanks to Mr. rebainoor)
    • Fly Nimbus 14 (FS456) (thanks to Mr. Usmanov Rustam)
    • Huawei Y3 2017 / Crow (CRO-L03) (thanks to Mr. daryl007)
    • INOI 2 Lite (thanks to Mr. Desudaff)
    • Ipro Kylin 5.5 (thanks to Mr. apostrofe)
    • Kurio 01516 (thanks to Mr. Remco)
    • Lava Iris 50 (thanks to Mr. gsmbac)
    • Lenovo TB-7304X (thanks to Mr. Desudaff)
    • LG G Pad F2 8.0 (LK460) (thanks to Mr. devicesnow)
    • Mediacom Phonepad Duo (M-PPxS7P) (thanks to Mr. salvo1278)
    • Motorola Moto C Plus (XT1725) (thanks to Mr. daryl007)
    • Motorola Moto G6 (XT1925-5) (thanks to Mr. Remco)
    • Navitel T500 3G
    • Nomi Ultra Plus (C10103)
    • Oukitel U7 Pro (thanks to Mr. Starkrimes)
    • Panasonic P88 (thanks to Mr. kapilanand11)
    • Pixus Hit (thanks to Mr. Xaker2012)
    • Senseit T250 (thanks to Mr. Faruxchik)
    • Swisstone SD 530 (thanks to Mr. tikal)
    • Verykool Leo V (S4008) (thanks to Mr. daryl007)
    • Walton Primo HM4i (thanks to Mr. pintu_das)
    • Wiko Sunny 3 (thanks to Mr. -=MR_Gsm=-)
    • Wiko U Pulse (thanks to Mr. Deadalus)
    • ZTE Blade L5 LTE (thanks to Mr. islamic.tj)
    Added “Reset FRP” in a Test Mode for the following devices:
    • Vivo Nex (PD1805F)
    • Vivo V1 (PD1502F)
    • Vivo V1 Max (PD1503F)
    • Vivo V3 Max (PD1523F)
    • Vivo V5 Plus (PD1624F)
    • Vivo V5s (PD1612DF)
    • Vivo V7 Plus (PD1708BF)
    • Vivo V9 Pro (PD1730CF)
    • Vivo V9 6GB (PD1730DF)
    • Vivo V11 (PD1814F)
    • Vivo V11 Pro (PD1814F)
    • Vivo Y35 (PD1502F)
    • Vivo Y37 (PD1503F)
    • Vivo Y55 (PD1613F)
    • Vivo Y55L (PD1613F)
    • Vivo Y55S (PD1613BF)
    New Samsung Combination firmwares were uploaded into the Support Area.
    New unique Qualcomm USB loaders were added to Software Loaders’ Data Base.
    All supported operations are described in details in Software manual (“Help” button in Software)

    Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!
    Download Octoplus FRP Tool v.1.4.5
     
  15. 19/10/18 lúc 10:26

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus JTAG PRO v.1.6.9 is out! New models and new loaders added!

    Added support for Blu Studio 7, Huawei SCL-U31, Lenovo TB-X304L, LG M154 via USB, and support for Moto XT1804, Samsung SM-C5000, Samsung SM-G610F, Samsung SM-J250F, Samsung SM-J327T, Samsung SM-J400M, Samsung SM-J530F, Samsung SM-J701M, Samsung SM-J720M, Samsung SM-J727A, Samsung SM-J727S, Samsung SM-J727T and Samsung SM-T561 via eMMC.

    Added new USB Qualcomm Loaders for different vendors' devices to the list of Software and to Software Loaders’ Data Base.

    New “Live logs” uploaded into the Support Area.


    Octoplus JTAG PRO Software v.1.6.9 Release Notes:
    Added support for the following models via eMMC:
    • Moto XT1804 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Pijush Das)*
    • Samsung SM-C5000 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)*
    • Samsung SM-G610F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)*
    • Samsung SM-J250F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J327T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J400M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J530F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)*
    • Samsung SM-J701M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J720M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J727A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J727S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J727T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T561 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)*
    Added support for the following models via USB:
    • Blu Studio 7 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei SCL-U31 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)*
    • Lenovo TB-X304L - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)*
    • LG M154 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes)*
    * SFR files created by users are uploaded into "USER UPLOADED SRF (NOT TESTED)" folder of the Support Area.
    Added new unique Qualcomm USB Loaders to the list of Software and to Software Loaders’ Data Base (Read/Write/Full erase operations are supported) for the following vendors' devices:
    • Asus - added loader for MSM8996
    • Coolpad - added loaders for MSM8976
    • LG - added loader for MSM8937
    • Oppo - added loader for MSM8937
    • Vivo - added loaders for MSM8953 and SDM660
    • ZTE - added loaders for MSM8974 and MSM8994
    Added 20+ common (general) Qualcomm USB loaders for different Qualcomm CPUs to Software Loaders’ Data Base
    New “Live logs” uploaded into the Support Area.
    Some adjustments and improvements were made.
    All pinouts and repair procedures are described in the manual ("Help" button in the software).
    [​IMG]
     
  16. 19/10/18 lúc 10:27

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus / Octopus Box Samsung Software v.2.7.4 is out! Added support for Samsung Galaxy A7/J4+/J6+ 2018 and more!

    Octoplus / Octopus Box Samsung Software v.2.7.4 Release Notes:

    Added support for the following models:
    - SM-A750F - added Read Codes (via server), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-A750FN - added Read Codes (via server), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-A750G - added Read Codes (via server), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware, Reboot in Recovery/Download mode

    - SM-J415F - added Read Codes (via server), Read/Write EFS, Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J415FN - added Read Codes (via server), Read/Write EFS, Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J415G - added Read Codes (via server), Read/Write EFS, Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode

    - SM-J610F - added Read Codes (via server), Read/Write EFS, Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J610FN - added Read Codes (via server), Read/Write EFS, Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode
    - SM-J610G - added Read Codes (via server), Read/Write EFS, Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Recovery/Download mode​
    Added Read Codes (via server, latest firmware versions/Security patch levels are supported, no root needed) for the following devices:
    - SM-J120A, SM-J120AZ, SM-J120F, SM-J120G, SM-J120M, SM-J120FN, SM-J120ZN, SM-J120W
    - SM-J200F, SM-J200BT, SM-J200G, SM-J200GU, SM-J200M, SM-J200Y
    - SM-J320A, SM-J320AZ, SM-J321AZ, SM-J320W8
    - SM-G389F
    - SM-G5500, SM-G550F, SM-G550FY
    - SM-T375S, SM-T375L
    - SM-T377W, SM-T377T
    Improved Direct Unlock operation for Sprint SM-J327P and SM-J727P.
    Many new Samsung Combination firmwares were uploaded into the Support Area.
    All supported operations described in details in the manual ("Cable & Manual" button in the software).
    Note: Please, always use the latest Software version.

    Also note: If you have any problems performing Read Codes operation, please contact us on Skype, you can find our contact info in our profile.

    For more detailed information about prices, please check Octoplus Credits Consumption.


    [​IMG]
     
  17. 19/10/18 lúc 10:27

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,471
    Được thích:
    136
    Octoplus FRP Tool v.1.4.6 is out! Many new devices added to the list of supported!


    Octoplus FRP Tool v.1.4.6 Release Notes:
    Added "Reset FRP" for the following devices:
    • Alcatel 3 (OT-5052Y) (thanks to Mr. AbDuLlAH kHaWaR)
    • Alcatel U5 (OT-5044A) (thanks to Mr. tolerance76)
    • Altice Starxtrem 5 (thanks to Mr. lyes_alber)
    • Assistant AS-5411 Max (thanks to Mr. Xaker2012)
    • Asus ZenPad 3 8.0 Z581KL (P008) (thanks to Mr. reza4455)
    • BQ HighWay (5025) (thanks to Mr. Faruxchik)
    • BQ Strike Power 4G (5037) (thanks to Mr. Faruxchik)
    • BQ Strike Power Easy (5058) (thanks to Mr. Xaker2012)
    • Brondi 620 SZ (thanks to Mr. Deadalus)
    • Cherry Mobile Flare S4 Max (thanks to Mr. icecube1982)
    • Condor Griffe T6 (SP-631) (thanks to Mr. DZ-DEVELOPER)
    • Condor Griffe T7 (SP-632) (thanks to Mr. DZ-DEVELOPER)
    • Condor Plume L2 Pro (SP-633) (thanks to Mr. DZ-DEVELOPER)
    • GOME K1
    • Iris Vox Energy (thanks to Mr. lyes_alber)
    • Itel A31 (thanks to Mr. wagonstev)
    • Klipad V355B (thanks to Mr. lyes_alber)
    • LG Phoenix 4 (LMX210APM)
    • Lenovo Tab4 10 (TB-X304F) (thanks to Mr. Remco)
    • Lyf Water 10 (LS-5020) (thanks to Mr. kapilanand11)
    • Micromax Canvas Magnus HD (Q421) (thanks to Mr. Faruxchik)
    • Mobicel R8 (thanks to Mr. MinPin)
    • Motorola Moto G3 (XT1548) (thanks to Mr. WBGSM)
    • Navon Suprem Fine (thanks to Mr. dominik1)
    • Nomi Energy Graphit (thanks to Mr. Xaker2012)
    • Philips Xenium (X588) (thanks to Mr. Faruxchik)
    • Premio P520 (thanks to Mr. CHAUDHRAY ARSHAD)
    • Pixus Hit (thanks to Mr. Xaker2012)
    • Ulefone Gemini (thanks to Mr. Xaker2012)
    • Wiko Sunny 3 Mini (thanks to Mr. Deadalus)
    • Wiko Tommy 3 (thanks to Mr. sisamo26, rebainoor)
    • Wiko U Feel Lite (thanks to Mr. elton1985)
    • ZTE Blade A320 (thanks to Mr. daryl007)
    New Samsung Combination firmwares were uploaded into the Support Area.
    New unique Qualcomm USB loaders were added to Software Loaders’ Data Base.
    All supported operations are described in details in Software manual (“Help” button in Software)


    Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!
    Download Octoplus FRP Tool v.1.4.6
     

Chia sẻ trang này