Bán Mở khóa - Mở mạng - Xóa xác minh tài khoản.

- FPT X3 xóa xác minh tài khoản Google thành công qua Teamviewer.
- FPT X3 reset frp, bypass acc google done via Teamviewer.

Hotline/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Model : FPT X3
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
Reset Ok!

 

- Vivo V3 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Vivo V3 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Device	: vivo vivo V3 [msm8916]
Software	: LMY47V release-keys, eng.compiler.20180403 [Tue Apr  3 16:39:48 CST 2018]
Android Ver.	: 5.1.1
Patch Level	: 2018-03-01
Resetting FRP Lock......Done

 

- Xiaomi MI 5S xóa xác minh tài khoản MiCloud thành công qua Teamviewer.
- Xiaomi MI 5S xóa xác minh tài khoản Google thành công qua Teamviewer.
- Xiaomi MI 5S remove accout MiCloud done via Teamviewer.
- Xiaomi MI 5S reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Device : Xiaomi MI 5s [msm8996]
Software : NRD90M, V9.5.2.0.NAGCNFA [Thu Apr 5 20:40:08 CST 2018]
Android Ver. : 7.0
Patch Level : 2018-03-01
Resetting Mi Account Data...Done
Resetting FRP Lock......Done

 

- Galaxy S8 - G950U mở khóa mạng Sim thành công qua Teamviewer.
- Galaxy S8 - G950U unlock network done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

 

- Sony Xperia XA Ultra F3213 mở khóa mạng Sim thành công qua Teamviewer.
- Sony Xperia XA Ultra F3213 unlock network done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

 

- A75 CPH1723 mở khóa mạng thành công qua Teamviewer.
- A75 CPH1723 unlock network done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

 Selected model: A75 CPH1723
 Action: Unlock
 Scanning for presents meta ports...
 Keep VOL- button untill inserting USB cable.
 [15]Detected: MTK USB Port (COM15)
 \\?\usb#vid_0e8d&pid_0003#1&79f5d87&0&0000#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [28]META Port Detected: Android Gadget VCOM Driver (COM28)
 USB\VID_22D9&PID_0006\1&79F5D87&0&0000
 ChipID: MT6763,S01
 Using Algo 3.
 Unlocking targer....
 Platform: MT6763
 IMEI: 866563030665558
 SN: DYAEZ9AEFEL7OB65
 Reading simlock, wait.
 Simlock: 00011010
 Write Simlock: 0
 All done.

 

- Mobiistar Lai Zoro 2 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Mobiistar Lai Zoro 2 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Inital Boot Ok!
Model : mobiistar lai zoro 2
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D42002972909283E3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D42002972909283E3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID	: 0x253F05AACA859535AC949AC26B941E88
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reset FRP
Clear FRP ( Google Reset Protection )
Clear Ok!
Done!

 

- Oppo Neo 9S - A39 đọc mã vẽ hình thành công qua Teamviewer.
- Oppo Neo 9S - A39 read pattern done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

 Selected model: A39
 Action: Read Pattern
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL+ button untill inserting USB cable.
 Detected : MTK USB Port (COM15)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6755
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 13014E51334A39 : 000000000000000000
 EMMC UA SIZE: 0x747c00000	 
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000	  [29.133 GB]
 -Reading GPT Drive OK
 **************************************
 1 2 3
 4 5 6
 7 8 9
 Pattern: 5478
 **************************************
 Pattern HEX: B3EB72B4647CD3434BA899B482827DC8D38D4A76

 

- Huawei Nova i2 - RNE-L22 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Huawei Nova i2 - RNE-L22 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

>>>>search android fastboot devices...
>>>>Get android fastboot devices...
	Mobile Name: RNE-L22
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Dynamic unlock code:c6902e75a883149a>>>>try temp unlock bootloader function 2...
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Dynamic unlock code:881603d245e09b64	Bootloader Temporary  Unlock Done
	tip:Bootloader Temporary after reboot will lock again
>>>>Clear Frp Block
 ...	(bootloader)  Erase success , the device will reboot and factory reset
OKAY [  0.090s]	finished. total time: 0.090s>>>>Rebooting Mobile Phone
	rebooting...		finished. total time: 0.020s

 

- Mobiistar Lai Zoro 2 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Mobiistar Lai Zoro 2 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Inital Boot Ok!
Model : mobiistar lai zoro 2
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D42002972909283E3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D42002972909283E3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID	: 0x253F05AACA859535AC949AC26B941E88
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reset FRP
Clear FRP ( Google Reset Protection )
Clear Ok!
Done!

 

- Galaxy S6 - G920F xóa xác minh tài khoản Samsung thành công qua Teamviewer.
- Galaxy S6 - G920F remove accout Samsung, bypass acc Samsung done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Operation: Reset FRP/React/EE
Selected model: SM-G920F
Searching Samsung USB Flash interface... detected COM4
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... OK
Searching EE lock... OK
Erasing EE lock... OK
Reset done

 

- FPT X58 xóa xác minh tài khoản Google thành công qua Teamviewer.
- FPT X58 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Inital Boot Ok!
Model : fpt x58
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642043BCA62F60149B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID	: 0x253F05AA07A564ADC27AF49C9F2666AB
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reset FRP
Clear FRP ( Google Reset Protection )
Clear Ok!
Done!

 

- Huawei Y7 Pro LDN-LX2 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Huawei Y7 Pro LDN-LX2 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

>>>>search android fastboot devices...
>>>>Get android fastboot devices...
	Mobile Name: LDN-LX2
	Mobile Set BL Lock state:ser Lock state is lock
	Trying First Way for Get the Unlock code
	Dynamic unlock code:c0f5866b77231097
>>>>try temp unlock bootloader function 2...
	Mobile Set BL Lock state:ser Lock state is lock
	Trying First Way for Get the Unlock code
	Dynamic unlock code:c0ab64bd2baec6c3
	Try Qualcomm temp Bootloader unlock new function...
>>>>try temp unlock bootloader function 2...
	Mobile Set BL Lock state:ser Lock state is lock
	Trying First Way for Get the Unlock code
	Dynamic unlock code:c0b7845a37a754c4
	Bootloader Temporary  Unlock Done
	tip:Bootloader Temporary after reboot will lock again
>>>>Clear Frp Block...Reset FRP...done

 

- CoolPad A110 xóa xác minh tài khoản Google thành công qua Teamviewer.
- CoolPad A110 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Model : coolpad a110
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505075683D26A1383
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505075683D26A1383
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID	: 0x253F05AA4743C92646E2C9598FC7B9D1
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!
Done!

 

- FPT X3 xóa xác minh tài khoản Google thành công qua Teamviewer.
- FPT X3 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model : fpt x3
FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : 
Size  : 0x00000001438F7000
State : 0x0003
Mount : /cache
Size  : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
Reset Ok!
Done!

 

Zenfone 4 Max Pro - X00ID xóa xác minh tài khoản Google ok
- ZC554KL - X00ID xóa xác minh tài khoản Google thành công qua Teamviewer.
- ZC554KL - X00ID reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Platform: ASUS
Selected model: ZC554KL (X00ID)
Found phone on COM3
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: 89CDDAE1
QC HW ID: 0004F0E100000000
QC CPU: MSM8937
QC HASH: 49D087CA08C6E2CA3D209C5697971E85D42A2F632592E68230C7D780F7D5DC1F
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: asus
Model: ASUS_X00ID
Device: ASUS_X00ID
Platform: msm8937
Android version: 7.1.1
Display ID: NMF26F.WW_Phone-14.2016.1805.235-20180521
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!

 

- J3 Pro - J330G xóa xác minh tài khoản Google thành công qua Teamviewer.
- J3 Pro - J330G reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Model: SM-J330G
Baseband: J330GDXU3ARD1
Bootloader: J330GDXU3ARD1
PDA: J330GDXU3ARD1
Android Version: 7.0
Resetting FRP Lock... Done

 

- Galaxy S5 - G900A mở khóa mạng Sim thành công qua Teamviewer.
- Galaxy S5 - G900A unlock network done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Model : SM-G900A
Reading phone info...
Reading IMEI... OK
IMEI: 353502060458088
Unlocking... OK
Reseting... OK
Unlock done

 

- Note 5 - N920A mở khóa mạng Sim thành công qua Teamviewer.
- Note 5 - N920A unlock network done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Please wait, generating hash codes file, this can take few minutes... OK
Searching Samsung modem... detected COM137
Reading phone info...
Model: SM-N920A
AP version: N920AUCS4EQH1
CSC version: N920AATT4EQH1
CP version: N920AUCS4EQH1
Product code: ATT
Phone SN: R38GA12BTTZ
IMEI: 352457075091815
Unique number: 05157DF5CA868819
Searching Samsung diag port... detected COM136
Reading phone info... OK
CP version: N920AUCS4EQH1
CP build: Aug  9 2017 11:08:08
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON333
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:06)
Freeze code: 68242531
NET lock: 35080290
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

 

- CoolPad A110 xóa xác minh tài khoản Google thành công qua Teamviewer.
- CoolPad A110 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Model : coolpad a110
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505075683D26A1383
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505075683D26A1383
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID	: 0x253F05AA4743C92646E2C9598FC7B9D1
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!
Done!

 

- A77 CPH1715 xóa mã bảo vệ, xóa mật khẩu màn hình thành công qua Teamviewer.
- A77 CPH1715 remove password, reset lockscreen done via Teamviewer.

HotLine/FB/ZaLo :0982.181.182 ( Tuan Pham )

Mã:

Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM15
>>> Device driver identification:
	MTK USB Port
>>> Mobile Has Connect...
	Model : a77 cph1715
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000E8F800000 -> 59640M
	Flash	 ID: 0x150100524836344D
	Flash   Name: Samsung_Unknow
	Flash symbol: RH64MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM16
>>> Device driver identification:
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x0137000000	Size(HEX):0x0D577FBE00
	Corresponding operation completed!!!

 

- Infocus xóa xác minh tài khoản Google thành công qua Teamviewer.
- Infocus reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Inital Boot Ok!
Model : infocus m808
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D335A348DA00242FD8D36D6
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM3Z4
[eMMC] : FLASH_CID : 15010051345A334D4202A08DD63692FD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x253F05AA709EBF944AA99296DDEF84D0
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reset FRP
Clear FRP ( Google Reset Protection )
Clear Ok!
Done!

 

- Y69 vivo 1714 xóa mã bảo vệ, xóa mật khẩu màn hình thành công qua Teamviewer.
- Y69 vivo 1714 remove password, reset lockscreen done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM15
>>> Device driver identification:
	MTK USB Port
>>> Mobile Has Connect...
	Model : y69 vivo 1714
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000747C00000 -> 29820M
	Flash	 ID: 0x90014A4842473461
	Flash   Name: Hynix_Unknow
	Flash symbol: HBG4a2
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM16
>>> Device driver identification:
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x0126800000	Size(HEX):0x06203FBE00
	Corresponding operation completed!!!

 

- J7 Prime - G610F mở khóa mạng Sim thành công qua Teamviewer.
- J7 Prime - G610F unlock network done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

 

- Xiaomi Redmi Note 5A xóa xác minh tài khoản Google thành công qua Teamviewer.
- Xiaomi Redmi Note 5A reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Device	: Xiaomi Redmi Note 5A [msm8937]
Software	: N2G47H, V9.5.8.0.NDFMIFA [Mon May 21 19:48:45 WIB 2018]
Android Ver.	: 7.1.2
Patch Level	: 2018-04-01
Resetting FRP Lock......Done

 

- J500H xóa xác minh tài khoản Google thành công qua Teamviewer.
- J500H reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Model: SM-J500H
IMEI: 352700070064729
Software: J500HXXU2BQH4/J500HOLB2BQH1/J500HXXU2BPJ4/J500HXXU2BQH4
Init Download Mode... OK
Port: COM4 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done

 

- Huawei GR5 BLL-L22 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Huawei GR5 BLL-L22 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

>>>>search android fastboot devices...
>>>>Get android fastboot devices...
	Mobile Name: BLL-L22
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Dynamic unlock code:aab39c2bffe486b0	Bootloader Temporary  Unlock Done
	tip:Bootloader Temporary after reboot will lock again
>>>>Clear Frp Block
	...	(bootloader) The device will reboot and do factory reset...	OKAY [  0.022s]	finished. total time: 0.022s>>>>Rebooting Mobile Phone
	rebooting...		finished. total time: -0.000s

 

- Galaxy S7 - G930A mở khóa mạng Sim thành công qua Teamviewer.
- Galaxy S7 - G930A unlock network done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

 

- Huawei Y3 CRO-U00 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Huawei Y3 CRO-U00 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Platform: HUAWEI
Selected model: CRO-U00
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: HUAWEI
Model: CRO-U00
Device: HWCRO-U6580M
Platform: mt6580
Android version: 6.0
Display ID: Cairo-U00C636B126
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!

 

- A9 2016 - A9000 xóa xác minh tài khoản Google thành công qua Teamviewer.
- A9 2016 - A9000 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Selected model: SM-A9000
Reset FRP/ Reactivation lock operation for SM-A9000 will delete all user data on the phone (contacts, pictures and others)!
NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Downloading resources...
All necessary resource files have been downloaded successfully.
Please put the phone into Download Mode and connect USB cable.
To put SM-A9000 into Download Mode, You have to perform the following steps:
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!

 

- TPLink Neffos C5 Max TP702A xóa xác minh tài khoản Google thành công qua Teamviewer.
- TPLink Neffos C5 Max TP702A reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Inital Boot Ok!
Model : tplink neffos c5 max tp702a
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A48414732650507511BAA5223A7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID	: 0x253F05AAA216BFA8B5AA24ADFA70E3E1
INT RAM	: 0x00020000
EXT RAM	: 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reset FRP
Clear FRP ( Google Reset Protection )
Clear Ok!

 

- Masstel N435 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Masstel N435 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model : masstel n435
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : /data
Size  : 0x000000010A1F7000
State : 0x0001
Mount : /cache
Size  : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
Reset Ok!
Done!

 

- Y71 vivo 1724 xóa mã bảo vệ, xóa mật khẩu màn hình thành công qua Teamviewer.
- Y71 vivo 1724 remove password, reset lockscreen done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Device	: vivo vivo 1724
Software	: OPM1.171019.011 release-keys, eng.compil.20180615.200507 [Fri Jun 15 20:05:07 CST 2018]
Android Ver.	: 8.1.0
Patch Level	: 2018-06-01
Preparing Data...Done
Formatting Userdata...Done

 

- A9 2016 - A9000 xóa xác minh tài khoản Google thành công qua Teamviewer.
- A9 2016 - A9000 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Selected model: SM-A9000
Reset FRP/ Reactivation lock operation for SM-A9000 will delete all user data on the phone (contacts, pictures and others)!
NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Downloading resources...
All necessary resource files have been downloaded successfully.
Please put the phone into Download Mode and connect USB cable.
To put SM-A9000 into Download Mode, You have to perform the following steps:
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!

 

- Masstel Tab 10 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Masstel Tab 10 reset frp. bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Inital Boot Ok!
Model : masstel tab 10
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 29G80
[eMMC] : FLASH_CID : 110100303038473932515912ADF341D1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID	: 0x253F05AAADBBAA113918014C458DA1DA
INT RAM	: 0x00020000
EXT RAM	: 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reset FRP
Clear FRP ( Google Reset Protection )
Clear Ok!
Done!

 

- Meizu M5 Note xóa xác minh tài khoản Flyme thành công qua Teamviewer.
- Meizu M5 Note remove accout Flyme done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM3
>>> Device driver identification:
	MTK USB Port
>>> Mobile Has Connect...
	Model : m5 note
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000747C00000 -> 29820M
	Flash	 ID: 0x150100525831424D
	Flash   Name: Samsung_Unknow
	Flash symbol: RX1BMB
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM7
>>> Device driver identification:
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Geting Mobile info data...
	ADD(HEX):0x0024BC8000	Size(HEX):0x0000700000   
>>>>Writeing Mobile info data...
	This Phone Support CDMA
	SN has Change to :621HECSM26RC
	SN has Change to :621HECSM26RC
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EC000000	Size(HEX):0x065ABFBE00
	Corresponding operation completed!!!

 

- Masstel N435 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Masstel N435 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model : masstel n435
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : /data
Size  : 0x000000010A1F7000
State : 0x0001
Mount : /cache
Size  : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
Reset Ok!
Done!

 

- Vivo Y71 vivo 1724 xóa mã bảo vệ, xóa mật khẩu màn hình thành công qua Teamviewer.
- Vivo Y71 vivo 1724 remove password, reset lockscreen done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Device	: vivo vivo 1724
Software	: OPM1.171019.011 release-keys, eng.compil.20180615.200507 [Fri Jun 15 20:05:07 CST 2018]
Android Ver.	: 8.1.0
Patch Level	: 2018-06-01
Preparing Data...Done
Formatting Userdata...Done

 

- Huawei Honor 9 STF-AL10 xóa xác minh ID Huawei thành công qua Teamviewer.
- Huawei Honor 9 STF-AL10 remove ID Huawei done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

>>>>Searching mobile phones...
	Get Hisi cpu Mobile Phones...
>>> Get Mobile Port:  COM34
>>>>Device identification :
	Android Adapter PCUI
>>>>Switch Mobile to Auth Mode
	Model : huawei honor 9 stf -al10
	PCB SN: 024NNJ1794000717
	Mobile SN:  5JP0217904003215
	Mobile Code: mission
>>>>Ersaeing Mobile accoutn data...Success
	All is done

 

- Huawei Nova 3E ANE-LX2 xóa xác minh tài khoản Google thành công qua Teamviewer.
- Huawei Nova 3E ANE-LX2 reset frp, bypass acc google done via Teamviewer.

HotLine/FB/ZaLo : 0982.181.182 ( Tuan Pham )

Mã:

Platform: HUAWEI
Selected model: ANE-LX2
Put the phone in FastBoot Mode:
Searching for a phone. Please wait...
Detected phone model: ANE-LX2
Phone SN: WCY7N18410006678
Phone IMEI: 867907031406190
Phone IMEI2: 867907031446204
SW version: ANE-LX2 8.0.0.121(C636)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
FRP lock is successfully reseted!