INFINITY CHINESE MIRACLE-2 _CM2_update new here

https://dl2.infinity-box.com/00/pub/?dir=/software/&uid=19354&file=CM2MT2_v2.39a5_pass_1111.7z


Infinity Chinese Miracle-2 #CM2MT2 v2.39 - MT6789 [Helio G99] and more...
Loaders updated:
/boot/0_generic/MT6781_Generic [LUCI]
/boot/0_generic/MT6789_Generic [LUCI]
/boot/Infinix/Infinix-G99-General
/boot/Infinix/Infinix-X676B
/boot/Tecno/Tecno-G99-General
General:
New protocol supported: [LUCI] - MT6781, MT6789, MT6895, MT6983 etc.
Supported:
SecurityRepair : Generic lines support for latest phones in both FLASH and META mode
FormatFS : SmartReset, SmartResetExtra - include reset settings, frp, privacy etc.
FirmwareReading : Factory-like, complete, safe firmware, compatible with MT2 and SPFT too
FirmwareFlashing : Correct, safe, factory and read firmware flashing support
Service : Service operations supported : Identify, NVRAM operations, MemoryTool, HW Info etc.
FormatFS:
Smart Reset updated: New types supported
Smart Reset updated: Android 11-12 specific changes
Smart Reset updated: A/B devices specific changes
Firmware reader:
NEXTGEN [LUCI] phones line support
Factory-like firmware reading now supported [LUCI]
XML-scatter generation now supported [LUCI]
Android 13 support activated [under test]
Android 12 support improved
Android 10-11 support rebuild
AB devices support complete rebuild. All known formats supported.
More accurate detection of vendor-specific partitions and handling
Escape from OTA issues and other startup faults etc. on some phones
Scatter creation for latest devices revised, more chip-depend versions now supported
Firmware flasher:
NEXTGEN phones line support [LUCI]
Factory and Read firmware flashing now supported [LUCI]
XML scatter, TXT scatter and flash.xml can be used as FlashFile input
Service:
Identify : Now read active system info if device belong to AB
BootLoader: Unlock and Lock as separate buttons now
BootLoader: Unlock in FireFly mode for LEGACY phones has been fixed
BootLoader: Unlock in FireFly mode for some of RAPHAEL phones has been fixed
MemoryTool: LUCI support, compatibility improvements
The Rest:
- Loaders storage structure updated
[built-in] /boot/0_base/X_FireFly/ => /boot/XFireFly/base/
[boot-pack] /boot/0_base/MT6570_*/ => /boot/0_rare/MT6570_*/
[boot-pack] /boot/0_base/MT6771/ => /boot/Vivo/MT6771/
- Loaders package updated
[built-in] /boot/0_base/base_v2216/
- Bases and Models list sort order revised
- Firmware version parser revised
- Error messages and usage hints updated
- eMMC EOL status hints updated
- Update checker revised
Required Dongle firmware version: 0154

 

Infinity #CM2MT2 boot-pack v2.40

Infinity #CM2MT2 boot-pack v2.40 with updated loaders

Loaders & structure updated

[+] Condor
[+] Dlight
[+] Xiaomi/Redmi-9c/ linked to base-2112 + preloader file from /Redmi-9/
[+] Xiaomi/Redmi-9a/ updated with preloader file from /Redmi-9/
[+] legacy loaders moved to /0_rare/
[+] /0_base/v17xx/ moved to boot-pack
[+] /0_base/v18xx/ moved to boot-pack
[+] /0_base/v19xx/ moved to boot-pack
[+] /0_base/v20xx/ moved to boot-pack

CM2MT2 v2.39 and higher should be used with the next loaders:
[+] Infinix/Infinix-G99-General/
[+] Infinix/Dimensity-9000/
[+] Infinix/X676B/
[+] Tecno/Tecno-G99-General/
[+] Tecno/Dimensity-9000/
[+] Tecno/Phantom-X2-X2Pro/
[+] /0_generic/ loaders for latest MT6781/MT6789/MT6983 are inside sw installer

Every new boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders

Download HERE

 

Infinity Chinese Miracle-2 #CM2MT2 v2.40

Infinity Chinese Miracle-2 #CM2MT2 v2.40

General:
FireFly : Protocol updated
FireFly : Activated new operations
1. Firmware Read
2. Firmware Write
3. MemoryTool : EXTCSD Read
4. MemoryTool : EXTCSD Write

FormatFS:
Smart Reset updated: New types supported
Smart Reset updated: Android 13 specific changes

Firmware reader:
Firmware Read activated in FireFly mode
Android 13 support improved [under test]

Firmware flasher:
Flasher Engine updated : [LUCI], [RAPH] and [LEGACY] protocols updated
Firmware Flashing activated in FireFly mode

Service:
Identify : Now read active system info if device belong to AB
BootLoader: Unlock/Lock revised in FireFly and MTK mode

MemoryTool:
New Operation : EXTCSD read - Allow read EXTCSD config from eMMC. Made default at boot also
New Operation : EXTCSD write - Allow write EXTCSD config in eMMC
Both operations supported only in FireFly mode for now!

The Rest:
Loaders updated
Previous versions of loaders partially moved to CM2MT2 boot-pack
CM2MT2 boot-pack v2.40 or newer should be installed to get latest loaders
Log output management updated
BugFixes and minor updates

Required Dongle firmware version: 0154

Download link #1
Download link #2
Download link #3

 

Infinity Chinese Miracle-2 #CM2MT2 v2.41

General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes

Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated

User Interface:
- log management engine updated
- software messages revised

Dongle firmware version required: 0154


Download link #1
Download link #2
Download link #3

 

Infinity Chinese Miracle-2 #CM2MT2 v2.42

General:
- Maintenance release
- Memory management improved
- Many internal changes
- Boot time flow process updated
- Boot time error handling improved

User Interface:
- flash chip info output revised
- software messages & hints updated

Dongle firmware version required: 0154


Infinity Chinese Miracle-2 #CM2MT2 v2.41

General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes

Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated

User Interface:
- log management engine updated
- software messages revised

Dongle firmware version required: 0154


Download link #1
Download link #2
Download link #3

 

Infinity Android Service Tool #AST v1.04

Infinity Android Service Tool #AST v1.04

- Connection methods updated for ADB and Fastboot
- Latest dll's included in package
- Log engine updated
- Stop/Logs/Snap buttons
- gui updated
- user interface save/restore options
- aplication list save on Identify
- Device messages output method revised
- Hints and error messages updated
- "Uninstall Apps" for batch processing by apk list loaded from text file
- "Pixel" bypass method
- Many internal changes

Download link #1
Download link #2
Download link #3

 

Infinity Chinese Miracle-2 #CM2MT2 v2.43

General:
- Device/Firmware detection method updated
- Boot process flow slightly changed
- Boot/Shutdown process updated
- Partition table analyzer rebuilded (primary/secondary)
- Service operations updated - red/orange state and bootloader unlock
- Bootloader lock/unlock process flow updated
- Service Report revised
- FileSystem type output revised
- Device handling Strategy type output revised
- scat load & emi management for "flash write" revised
- MemoryTool operations revised and bugs with menu selection fixed
- Security values processing updated
- META mode output revised
- Preloader parser revised
- EMI handling for legacy devices fixed
- Internal changes - memory management and more

User Interface:
- FLASH/META mode selection changed
- DA Protocol selection changed
- Software messages & hints updated


Download link #1
Download link #2
Download link #3

 

Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features

Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features

General:
- Device info detection revised
- EMI processing for legacy hardware (f.e. MT6580) revised
- EMI database rebuilded
- Meizu operations revised
- New feature: Brom ON/OFF - allow enable BROM mode and allow do extended services such as:
All FireFly Features: Boot unlock, testing, service etc.
All FireFly DA features: Boot unlock, RPMB, service and other
NOTE: Read BROM On|Off manual
- Display partition/image size during flash Read/Write
- Device information parser updated
- DA selection mode revised
- DA information/hints displayed on selection for number of loaders
- DA config database updated
- Red|Orange state methods revised
- Incompatible image confirmation during Flash fixed
- Simlock methods output updated
- Format methods output updated
- Infinix and Tecno without testpoint/disassembly included MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
- Internal changes - memory management and more

MemoryTool:
- Bulk Read/Write operations updated: selection and Read/Write path sync
- Read/Write file path handling method on file select/cancel revised
- Messages & errors|hints updated

Backup:
- Backup restore process updated with any record On|Off selection
- Select All/None items by right mouse click

User Interface:
- Startup window position config revised
- Software messages & hints updated

Dongle firmware version required: 0155


Download link #1
Download link #2
Download link #3

 

Infinity #CM2MT2 v2.45

Infinity #CM2MT2 v2.45

- startup process and external dll's handling method revised to avoid 0x0c000007b issue with damaged libusb installation
- boot process revised
- boot/sla error handling method changed
- flash read process revised: luci handling updated and more detailed output
- EMI database structure updated
- MemoryTool file path handling updated, non-existent path check
- external dll's moved to /lib/
- external dll's verification method updated
- separate fscard.ini file is not required any more
- strategy detector updated: honor
- "Restore backup" process revised, issue with filelist fixed
- flash writer display source file size instead of partition size
- flash reader: [Create SCAT] option
- gui resize bug fixed
- auto-update check method changed to once per day
- messages and hints updated
- minor ui changes
- many internal changes and improvements

NOTE: install latest CM2MT2 boot-pack for best results

Download link #1
Download link #2
Download link #3

 

Infinity #CM2MT2 v2.46

LUCI Devices:
- MT6983 support fixed
- UltraFlash protocol updated

Firmware Reader:
- Automatic detection activated
- Software now allow correctly read most modern devices even if they are not tested
- Avoid possible problems with OTA, damaging vendor-unique stuff or any other identification data

Firmware Analyzer:
- Strategy detection revised
- Firmware version detection methods updated

Bootloader unlock:
- Oppo/Realme specific changes

Factory Reset:
- Complete rebuild to automatic / vendor strategy depend mode

Boot methods:
- boot/DA database management revised

SCAT loader:
- Display firmware info on file load
- Display firmware info on flash write start
- Verify loaded image via server

Other changes:
- messages and hints updated
- minor ui changes
- many internal changes and improvements


Download link #1
Download link #2
Download link #3

 

Infinity #CM2MT2 v2.47 - FireFly over preloader mode and more

Infinity #CM2MT2 v2.47 - FireFly over preloader mode and more

Main:
FireFly DA activated for RAPHAEL devices in preloader mode.
Support wide range of generic and secure devices on most of the following chipsets:
MT6755, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6785, MT6833, MT6853, MT6873, MT6893
- For secure devices in preloader mode you must use appropriate vendor DA.
- MT2 package contain range of secure PRELOADER DA for vendor f.e. Tecno, Infinix, Vivo
It helps to service device over PRELOADER mode without Test-Point
- You can use own private Preloader DA with any vendor restrictions freely
Now over preloader with default range of service features you also got Bootloader unlock, RPMB, MemoryTool and other extended service stuff.
Solution tested and support on wide range of DA from 2017 up to 2023.

MT6755, MT6761, MT6765, MT6763, MT6771, MT6779, MT6768, MT6885, MT6853, MT6785, MT6873, MT6833, MT6893
Vivo: Y33s, Y30g, Y51, Y53s, Y19, Y5s, V17-Neo, S1-P65, Y7s, Y21a|V2149, V15|1819, S1|1907N, Y15s|V2120 and more.

- LUCI protocol updated
- RAPHAEL protocol updated
- META/SVE mode protocol management updated

Boot process:
- process flow updated
- process messages and error handling updated
- connection rebuild in BROM/PRELOADER mode

Service:
- Backup restore fixed in "restore all" mode
- Firmware Reader updated
- Bootloader unlock process updated (Xiaomi)

Flash Engine:
- UltraFlash protocol updated

Other changes:
- server protocols revised
- hardware compatibility engine updated
- software messages and hints updated
- minor ui changes
- many internal changes and improvements

Dongle firmware version required: 0156

Manual https://forum.infinity-box.com/viewtopic.php?t=27162




Download link #1
Download link #2
Download link #3

 

Infinity #CM2MT2 v2.48

Infinity #CM2MT2 v2.48

Main:
- Vivo without test-point improved and support more flash chip types
- Boot process slightly updated
- [MDM Fix] option for security plugins, payjoy etc.
- [Orange State] operation revised
- Flash write config options updated
- Flash write process algo revised
- SCAT loader revised

Other changes:
- software messages and hints updated
- minor ui changes
- many internal changes and improvements


Download link #1
Download link #2
Download link #3

 

Infinity #CM2MT2 v2.49 - MDM Fix process updated and more

Infinity #CM2MT2 v2.49 - MDM Fix process updated and more

- [MDM Fix] file creation process rebuilded, more image types supported
- [MDM Fix] fast direct one click process released. Number of supported devices may be limited for now

Write your [MDM Fix] result HERE

- Meizu operations revised
- Xiaomi operations revised
- Server hints/loaders downloading method updated
- Firmware info extraction on [Identify] method updated
- Information about written images furing flash changed
- Retrieve MDM state on [Identify]
- Retrieve network options on [Identify]
- eMMC crc verification on boot
- Loaders updated
- Many internal changes and optimization applied


Before run #CM2MT2 v2.49 please fix your PC. Disable/Close TeamViewer, Anydesk, Ultraviewer, Ammyy Admin

And stop Services:
1. Right click on This PC => Manage => Services and Applications => Services => Double click to service
2. Click to [ Stop ] button
3. Select Manual and click to [ OK ]


Download link #1
Download link #2
Download link #3

 

Infinity #CM2MT2 v2.51

Infinity #CM2MT2 v2.51

NOTE 1: Many new methods are being applied to the latest models. Consider to install this version to new directory and in case of any issue with old models use previously released software version for it.
NOTE 2: #CM2MT2 v2.51r1 has fixed gui issue with security values selection

CPU/Platforms:
LUCI: Protocol updated
LUCI: Vendor-specific changes
LUCI: RAMless support activated - RAMless DA must be used, automatic detection
LUCI: New SOC: MT6835 support activated
LUCI: New SOC: MT6985 support activated
More brands are covered in this update: Realme, Oppo, Tecno, Infinix, Lenovo, Moto

General changes:
- New loaders and boot method for Tecno/Infinix (without test point)
- New loaders and boot method for Vivo [luci] (without test point)
- New loaders and boot method for Realme [luci] (without test point)
- New loaders and boot method for Oppo [luci] (without test point)
- New loaders generic models base_v2316
- Loaders config for xioami updated
- Loaders storage tree updated to make easier selection
- Boot procedure updated
- Legacy devices (MT6580 and similar) connection process revised
- Supported CPU list updated: MT6835, MT6985
- MemoryTool filesystem detection method updated
- MemoryTool|RawTool updated
- MemoryTool messages updated
- MDM operations updated
- Device info parser updated
- Firmware analyzer updated
- EMMC hardware fault detection improved
- Server firmware verification method updated
- Startup Logs Analyzer added to [HW|SW reports]
- Format/Reset mode selection method changed, all operations rebuilded
- [Probe rpmb] option for [Identify]
- Filesystem(s) detection method updated
- gui changes
- Many internal changes and optimization applied


Download link #1 Download link #2

 

Infinity #CM2MT2 v2.52

Infinity #CM2MT2 v2.52

- Boot procedure updated (BROM mode)
- More loaders included in package
- [Smart] Reset method updated
- vivo sec processing updated
- oppo regionlock via [Smart] Reset
- Display FRP status during [Identify]
- Firmware version detection method updated
- MemTool path selection method updated
- Reset FRP and Bootloader state options during flash write
- Needless firmware version check during flash write removed
- Legacy config parameters removed from [Settings]
- Database location changed to /cfg/ directory
- Minor gui changes
- Many internal changes and optimization applied


Download link #1 Download link #2

 

Infinity CM2SP3 v2.20r1 released, more SoC and 400+ new devices supported

Infinity CM2SP3 v2.20r1 released, more SoC and 400+ new devices supported

Completely rebuilded CM2SP3 tool released with unique servicing methods and functions.
For now 400+ devices and number of SoC in list, unique hardware fault detection methods and special FireFly [FF] boot mode.
More features comes step-by-step

[A] acer, agm, alcatel, alldocube, archos
[B} benco, blackview, blu, bimax, bq
[C] chuwi, coolpad, cubot
[D] dexp, digma, doogee, doro
[F] foxdd, freeyond
[G] general-mobile, gionee
[H] headwolf, hiper, hisence, honor, hotwav, htc
IIIF150, infinix, inoi, itel
[J] jumper
[K] kenxinda
[L] lava, lenovo, letv, lg
[M] meizu, micromax, motorola, myphone
[N] n-one
[O] oppo, oukitel
[P] panasonic, philips, phonemax, prestigio
[R] realme
samsung, signma-mobile, sunwind
[T] tcl, teclast, tecno, topdevice, tp-link-neffos
ulefone, umidigi, uniwa
[V] vastking
[W] wiko
[X] xgody, xiaolajiao, xiaomi
[Z] zte

SoC: T310, T606, T609, T612, T618, sc9230, sc9820, sc9832, sc9863

- [LiveBoot mode] activated: boot once, do what you want
- Standard FDL and custom FireFly [FF] loaders are supported
- External FDL1/FDL2 loaders support
- External PAC file as loader support
- Server authentication for number of operations available

- EXTCSD EMMC info extractor
- EMMC chip health status report to detect faulty EMMC
- HW|SW Report: extract startup logs/faults

- Device hardware and software info read on [Identify]
- Sensitive data [Device-ID] backup create on [Identify]
- Sensitive data [Device-ID] backup restore (own or with selection)
- [Device-ID] read/write [diag]
- [Device-ID] read [boot]
- WiFi MAC address read
- WiFi MAC address fix
- Bluetooth MAC address read
- Bluetooth MAC address fix
- [Disconnect] button to release device connection

- Reset frp
- Reset filesystem: userdata
- Reset filesystem: wipe
- [Smart] reset to fix ota and nvram issues
- PAC file information extractor

- Sound alert on critical errors during read/write
- Account status check
- Updates checker
- Progress display percent with decimal separator to be more precise
- Separate operation log file in /log/ directory for each session
- [Snap] button for instans software screenshot


Download link #1 Download link #2

 

Infinity #CM2SP3 v2.21 released, 650+ devices supported

Infinity #CM2SP3 v2.21 released, 650+ devices supported

HOW TO USE

- Devices list updated with more devices
- Boot process revises, loaders incompatibility detection improved
- Autosave [~user] profile for selected external PAC loaders
- Protocol selection hints updated
- Baudrate (connection speed) selection for [FDL] mode
- Store partitions layout to backup
- Firmware read option
- Display estimated time to end of firmware read process
- Disk free space verification on read
- Minimize allocated storage space on read and truncate files to actual data size
- Firmware write option by layout.txt and gpt.raw layouts
- Firmware files selection for write with On/Off option for each file
- Separate button for EXTCSD read
- Protocol selection hints and suggestions as per selected device hardware
- Selected SoC name included in operation header text
- Firmware version detection method revised
- Boot pack version check revised
- Boot pack files updated
- Free disk space verification method changed
- gui fixes
- Many internal improvements and fixes

NOTE: Complete Device Database compilation is in progress but it takes time. In case of connection issue with built-in loaders try with PAC file.


Download link #1 Download link #2

 

Infinity #CM2SP3 v2.22 released, bootloader, mdm and more

Infinity #CM2SP3 v2.22 released, bootloader, mdm and more
800+ devices in list
- Devices list updated with more brands and models
- Device database [boot-pack] updated with more parameters
- Bootloader unlock/lock for many devices
- Additional [wipe] option during bootloader lock/unlock process
- MDM fix [Apply] and [Rollback] for many devices
- Firmware version detection issue (crash) fixed
- "Device autosave" method on PAC selection updated
- Boot pack files updated
- Minor gui changes
- Many internal improvements and fixes


Download link #1 Download link #2

 

Infinity #CM2SP3 v2.23 released - [MemoryTool], EXTCSD write and more features

Infinity #CM2SP3 v2.23 released - [MemoryTool], EXTCSD write and more features

HOW TO USE

- Devices list updated with more models
- [MemoryTool] initial release with Read/Write/Wipe partitions
- [MDM] Apply/Rollback methods improved
- Built-in boot pack files updated
- EXTCSD parser revised
- [MemoryTool] EXTCSD write option
- Firmware version/strategy parser updated
- Minor gui changes
- Many internal improvements and fixes

Download link #1 Download link #2

 

Infinity #CM2SP3 v2.24 released - [MMC EOL Reset], RPMB read and more features

Infinity #CM2SP3 v2.24 released - [MMC EOL Reset], RPMB read and more features

[FF] mode:
- [MMC EOL Reset] function to attempt to extend faulty EMMC lifetime
- [RPMB] read function
- [Repartition] option during flashing
- [MemoryTool] read partition table
- [MemoryTool] INIT (write) partition table

- Devices list updated with more models
- Built-in boot pack files updated
- Partition table analyzer updated
- [MDM] Apply/Rollback methods improved
- backup and firmware read/write process updated
- [Service Report] option
- Many internal improvements and fixes


Download link #1 Download link #2

 

Infinity #CM2SP3 v2.26 released - RPMB, AppTool, more SoC supported

Infinity #CM2SP3 v2.26 released

- Many new models in list
- SC7731e [FF] protocol released for advanced service options
- [RPMB Write] function in addition to previously released [RPMB Read]
- RPMB Smart Write enabled to optimize and make faster RPMB write process
- Filesystem parser (ext4) revised
- RPMB autobackup on Connect
- [Change Active Slot] option for [MemTool]
- [Device-ID] functions revised
- GPT parser revised

[AppTool] feature via [FF] mode
- Print list of available/installed APK
- Disable any (even system) APK pernamemntly
- Disabled APK stay disabled even after Reset or Wipe
- Save list of installed APK to file
- Restore disabled APK back anytime
- Extremely fast processing
NOTE: Bootloader must be unlocked for this operation

What [AppTool] can do:
- OTA On/Off
- MDM/Admin Apps On/Off
- Bloatware/Telemetry/Spy Apps On/Off
- Network/Operator addons On/Off
- And many more features depends on your fantasy

- Devices list updated with more models
- Built-in boot pack files updated
- Config options save/restore on startup
- Minor gui changes
- Internal improvements and fixes

HOW TO USE


Download link #1 Download link #2

 

Infinity #CM2MT2 v2.56 - [AppTool] feature, [MMC EOL Reset] and more

Infinity #CM2MT2 v2.56 - [AppTool] feature, [MMC EOL Reset] and more

[AppTool] feature
- Print list of available/installed APK
- Disable any (even system) APK pernamemntly
- Disabled APK stay disabled even after Reset or Wipe
- Save list of installed APK to file
- Restore disabled APK back anytime
- Extremely fast processing
NOTE: Bootloader must be unlocked for this operation!

What [AppTool] can do:
- OTA On/Off
- MDM/Admin Apps On/Off
- Bloatware/Telemetry/Spy Apps On/Off
- Network/Operator addons On/Off
- And many more features depends on your fantasy

- Boot files selection method updated
- DA selection method updated
- [MemTool] gui changes
- [MemTool] functions rebuilded
- [MMC EOL Reset] function to attempt to extend faulty EMMC lifetime
- PSN Read/Write function released
- [MDM] method updated including infinix/tecno/itel handling
- BT/WiFi MAC addrees read method updated
- SCAT file load method changed, preloader become un-checked by default
- [Format/Reset] methods updated
- [Format/Reset] separate [Accounts] option released
- key.json generation for generic devices
- boot-pack integration method changed
- GUI changes
- Internal changes and optimizations




Download link #1 Download link #2

 

Infinity #CM2MT2 v2.58 - MDM, PSN, [AppTool], [MemTool], [RawTool], boot-pack...

Infinity #CM2MT2 v2.58 - MDM, PSN, [AppTool], [MemTool], [RawTool], boot-pack on Demand

- Firmware version detection method updated, process goes much faster
- Reboot On|Off option behaviour changed
- SoC/Model/DA Selector revised
- Connection process for completely erased devices changed
- [Identify] process updated for faulty units better detection
- Flasher/SCAT loader menu updated
- [RawTool] rebuilded
- [AppTool] menu updated with Find First/Last/Next/Previous options
- [boot-pack] On Demand Downloader:
Offline boot-pack installation is not required
DA/Auth/Preloader files loaded from server on model selection via [Get boot files]
- [MDM File] option removed as useless
- [MDM] process rebuilded, it works without account/username
- Backup engine and process rebuilded
- PSN REad/Write method updated
- GUI changes
- Internal changes and optimizations


How to Reset MDM

How to get DA without boot-pack installation

How to use [AppTool]

How to make [MMC EOL Reset]


Download link #1 Download link #2

 

Infinity #CM2SP3 v2.27

Infinity #CM2SP3 v2.27

1300+ devices in list
- Boot process and software detection method revised, initial connection become much faster
- Test-Points images included to device dtabase
- Online device list and database update
- PSN1/2/3 Read/Write
- RPMB backup process revised
- MDM process revised
- [AppTool] process revised, [Expert Mode] enabled
- Devices list updated with more models and parameters
- Built-in boot pack and config files updated
- PAC file flashing
- [MemTool] RPMB wipe function
- [MemTool] boot1/boot2 EMMC area read/write
- Computer Sleep disabled during flash read/write operations
- erofs driver engine revised
- Minor gui changes
- Internal improvements and fixes
NOTE: Installer has no test-points!
To download test-point for selected device use [Get boot files] button


Download link #1 Download link #2

 

Infinity #CM2MT2 v2.72 - Auth for latest devices for FREE

Infinity #CM2MT2 v2.72 - Auth for latest devices for FREE

- Boot Authentication for [luci] generation tecno/infinix/itel devices
- [AppTool] updated
- Device-ID repair issue in boot mode for some device types fixed


If your dongle support is expired
Send your dongle S/N to any seller and buy "[CM2] support renew for 1 or 2 years"

Sellers - https://infinity-box.com/buy/
How to check support date - https://infinity-box.com/doc/?r=17

 

Infinity #CM2MT2 v2.73

Infinity #CM2MT2 v2.73

- Boot Authentication for number of devices updated
- DAv6 parser updated
- Autobackup process updated
- huawei account processing revised, issues fixed
- Device-ID method revised, issues fixed


Also New and updated DA and models, get latest MTK DA [Get boot files]

Infinix X6837
Infinix X6850
Infinix X6851
Infinix X6860
Infinix X6861
Infinix X6871
Infinix X6882
Infinix X6882B
Moto G24
Moto G24
Oblue Tank-3
OnePlus Ace
Oppo CPH2411
Realme RMX3785
Tecno AD10
Tecno AD8
Tecno CK7n
Tecno CL6
Tecno CLA5
Tecno CLA6
Tecno KJ6
Tecno KJ7
Tecno LI6
Tecno LI7
Visible WTVIS01
Xiaomi aristotle
Xiaomi Redmi-Note-13-Pro+-5g-zircon
Lenovo Tab-2-A10-70L


Download link #1 Download link #2

 

Infinity #CM2MT2 v2.74

- Preloader parser updated
- OS version detection via DAv6 method updated
- MDM process fixed for number of devices
- [AppTool] for number of devices updated
- Print SoC drivers version
- Slots management updated for latest devices
- Reset/Format updated for latest devices

Download