Hiện mình có 2 con HTC 816G MT6582 Dual sim mình tải rom: [search gg: rom htc 816g] trang đầu tiên dongnaigsm file dạng bin MT6592. Dùng Micracle Box Ver 2.27A để write, khi write xong thì máy mấy nguồn không nhận cáp gì hết, lúc gắn cáp chỉ báo đèn trên cảm biến ánh sáng màu đỏ mờ mờ thôi. Mình lấy một máy 816G MT6582 khác root và dump phân vùng mmclk0 full 3.52GB Rồi tháo ổ cứng bên máy mất nguồn, dùng Easy Jtag mở tools Easy Plus và tab Write by Vendor chọn dấu 3 chấm chọn file dumpmmclk0.img vừa dump sau khi nạp xong đóng vào cũng vẫn không lên. Mình tháo ổ cứng bên máy sống ra gắn vào đế và dùng Easy Plus qua tab Read by Vendor, Read full file nạp qua ổ cứng mất nguồn vẫn không lên. Tiếp tục tải các file stock 816G Dual sim MT6582 về dùng Easy Plus chọn Mediatek nạp lại full nhưng vẫn không được. Mình xin nhờ các bác giúp đỡ có cách nào cứu được con 816G Dual sim CPU MT6582 không ạ. eMMC dùng là hãng Micron 19/09/2017 10:32:19> Looking for EasyJTAG box... 19/09/2017 10:32:19> EasyJTAG API ver. 2008 19/09/2017 10:32:19> Setting IO Levels to 2.8V 19/09/2017 10:32:19> Setting frequence to 14 Mhz 19/09/2017 10:32:19> HiPower mode is OFF 19/09/2017 10:32:20> OpenUSB returned = 0 19/09/2017 10:32:20> Power Controller returned = 0 19/09/2017 10:32:21> EasyJTAG Box Serial = 0E0EFF2143D72BE7 19/09/2017 10:32:21> EasyJTAG Box Firmware = 01.60 19/09/2017 10:32:21> HiPower mode is OFF 19/09/2017 10:32:22> Frequence: 14 Mhz 19/09/2017 10:32:22> CMD Pullup Level: 2619 mV 19/09/2017 10:32:22> CMD Active Level: 2712 mV 19/09/2017 10:32:22> eMMC Init returned = 0 19/09/2017 10:32:22> EMMC Device Information : 19/09/2017 10:32:22> EMMC CID: FE014E50314A39354B120D693D991310 19/09/2017 10:32:22> EMMC CSD: D06E01320F5913FFFFFFFFEF92400070 19/09/2017 10:32:22> EMMC Manufacture Name: MICRON 19/09/2017 10:32:22> EMMC Manufacture ID: 0xFE , OEM ID: 014E 19/09/2017 10:32:22> EMMC Manufacture Date: 1/2016 , Rev: 12 19/09/2017 10:32:22> EMMC NAME: P1J95K , S/N: 0D693D99 , rev. 12 19/09/2017 10:32:22> EMMC NAME (HEX): 50314A39354B 19/09/2017 10:32:22> EMMC ROM 1 (Main User Data) Capacity: 7472 MB (0001D3000000) 19/09/2017 10:32:22> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) 19/09/2017 10:32:22> EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) 19/09/2017 10:32:22> EMMC Permanent Write Protection: No 19/09/2017 10:32:22> EMMC Temporary Write Protection: No 19/09/2017 10:32:22> Extended CSD Information : 19/09/2017 10:32:22> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 19/09/2017 10:32:22> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 19/09/2017 10:32:22> Boot Bus Config: 0x00 , width 1bit 19/09/2017 10:32:22> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 19/09/2017 10:32:22> Supported partition features [PARTITIONING_SUPPORT]: 0x07 19/09/2017 10:32:22> Device supports partitioning features 19/09/2017 10:32:22> Device can have enhanced technological features in partitions and user data area 19/09/2017 10:32:22> Device can have extended partitions attribute 19/09/2017 10:32:22> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 19/09/2017 10:32:22> Backup saved: P1J95K_0D693D99_20170919_103222.extcsd 19/09/2017 10:32:22> EMMC Init completed. 19/09/2017 10:32:22> 19/09/2017 10:32:22> Operation: Write by vendor (MediaTek) 19/09/2017 10:32:22> 19/09/2017 10:32:22> Partition name: PRELOADER 19/09/2017 10:32:22> Filename: preloader_lcsh82_cwet_kk.bin , Offset: 000000000000 , filesize: 117348 bytes 19/09/2017 10:32:22> eMMC switching to ROM2 19/09/2017 10:32:23> Writing partition... 19/09/2017 10:32:24> Done writing partition. Write speed: 120.27 Kb/s 19/09/2017 10:32:24> Partition name: MBR 19/09/2017 10:32:24> Filename: MBR , Offset: 000000880000 , filesize: 512 bytes 19/09/2017 10:32:24> eMMC switching to ROM1 19/09/2017 10:32:24> Writing partition... 19/09/2017 10:32:24> Done writing partition. Write speed: 10.81 Kb/s 19/09/2017 10:32:24> Partition name: EBR1 19/09/2017 10:32:24> Filename: EBR1 , Offset: 000000900000 , filesize: 512 bytes 19/09/2017 10:32:24> eMMC switching to ROM1 19/09/2017 10:32:24> Writing partition... 19/09/2017 10:32:24> Done writing partition. Write speed: 9.59 Kb/s 19/09/2017 10:32:24> Partition name: UBOOT 19/09/2017 10:32:24> Filename: lk.bin , Offset: 0000025C0000 , filesize: 257612 bytes 19/09/2017 10:32:24> eMMC switching to ROM1 19/09/2017 10:32:25> Writing partition... 19/09/2017 10:32:25> Done writing partition. Write speed: 329.85 Kb/s 19/09/2017 10:32:25> Partition name: BOOTIMG 19/09/2017 10:32:25> Filename: boot.img , Offset: 0000029C0000 , filesize: 5836800 bytes 19/09/2017 10:32:25> eMMC switching to ROM1 19/09/2017 10:32:26> Writing partition... 19/09/2017 10:32:33> Done writing partition. Write speed: 730.98 Kb/s 19/09/2017 10:32:33> Partition name: RECOVERY 19/09/2017 10:32:33> Filename: recovery.img , Offset: 000003DC0000 , filesize: 6230016 bytes 19/09/2017 10:32:33> eMMC switching to ROM1 19/09/2017 10:32:34> Writing partition... 19/09/2017 10:32:44> Done writing partition. Write speed: 587.82 Kb/s 19/09/2017 10:32:44> Partition name: SEC_RO 19/09/2017 10:32:44> Filename: secro.img , Offset: 0000051C0000 , filesize: 135168 bytes 19/09/2017 10:32:44> eMMC switching to ROM1 19/09/2017 10:32:44> Writing partition... 19/09/2017 10:32:44> Done writing partition. Write speed: 1017.60 Kb/s 19/09/2017 10:32:44> Partition name: LOGO 19/09/2017 10:32:44> Filename: logo.bin , Offset: 000005BC0000 , filesize: 1420083 bytes 19/09/2017 10:32:44> eMMC switching to ROM1 19/09/2017 10:32:45> Writing partition... 19/09/2017 10:32:47> Done writing partition. Write speed: 713.37 Kb/s 19/09/2017 10:32:47> Partition name: EBR2 19/09/2017 10:32:47> Filename: EBR2 , Offset: 0000063C0000 , filesize: 512 bytes 19/09/2017 10:32:47> eMMC switching to ROM1 19/09/2017 10:32:47> Writing partition... 19/09/2017 10:32:47> Done writing partition. Write speed: 20.64 Kb/s 19/09/2017 10:32:47> Partition name: ANDROID 19/09/2017 10:32:47> Filename: system.img , Offset: 00000C040000 , filesize: 1359620348 bytes 19/09/2017 10:32:47> eMMC switching to ROM1 19/09/2017 10:32:47> Writing partition... 19/09/2017 10:32:47> Sparse image found v.1.0 Total chunks: 1896 19/09/2017 11:03:58> Done writing partition. Write speed: 709.79 Kb/s 19/09/2017 11:03:58> Partition name: CACHE 19/09/2017 11:03:58> Filename: cache.img , Offset: 00008C040000 , filesize: 13668728 bytes 19/09/2017 11:03:58> eMMC switching to ROM1 19/09/2017 11:03:58> Writing partition... 19/09/2017 11:03:58> Sparse image found v.1.0 Total chunks: 29 19/09/2017 11:04:09> Done writing partition. Write speed: 1201.47 Kb/s 19/09/2017 11:04:09> Partition name: USRDATA 19/09/2017 11:04:09> Filename: userdata.img , Offset: 0000B7C40000 , filesize: 50012956 bytes 19/09/2017 11:04:09> eMMC switching to ROM1 19/09/2017 11:04:10> Writing partition... 19/09/2017 11:04:10> Sparse image found v.1.0 Total chunks: 64 19/09/2017 11:04:57> Done writing partition. Write speed: 1027.03 Kb/s 19/09/2017 11:04:57> 19/09/2017 11:04:57> Writing DL_Info... 19/09/2017 11:04:57> Writing DL_Info done 19/09/2017 11:04:57> 19/09/2017 11:04:57> Writing eMMC Register ... 19/09/2017 11:04:57> Reg: 179 Value: 0x48 19/09/2017 11:04:58> Reg: 177 Value: 0x00 19/09/2017 11:04:58> 19/09/2017 11:04:58> All done 19/09/2017 11:06:52> 19/09/2017 11:06:56> Looking for EasyJTAG box... 19/09/2017 11:06:56> EasyJTAG API ver. 2008 19/09/2017 11:06:56> Setting IO Levels to 2.8V 19/09/2017 11:06:56> Setting frequence to 14 Mhz 19/09/2017 11:06:56> HiPower mode is OFF 19/09/2017 11:06:57> OpenUSB returned = 0 19/09/2017 11:06:57> Power Controller returned = 0 19/09/2017 11:06:58> EasyJTAG Box Serial = 0E0EFF2143D72BE7 19/09/2017 11:06:58> EasyJTAG Box Firmware = 01.60 19/09/2017 11:06:58> HiPower mode is OFF 19/09/2017 11:06:59> Frequence: 14 Mhz 19/09/2017 11:06:59> CMD Pullup Level: 2619 mV 19/09/2017 11:06:59> CMD Active Level: 2712 mV 19/09/2017 11:06:59> eMMC Init returned = 0 19/09/2017 11:06:59> EMMC Device Information : 19/09/2017 11:06:59> EMMC CID: FE014E50314A39354B120D693D991310 19/09/2017 11:06:59> EMMC CSD: D06E01320F5913FFFFFFFFEF92400070 19/09/2017 11:06:59> EMMC Manufacture Name: MICRON 19/09/2017 11:06:59> EMMC Manufacture ID: 0xFE , OEM ID: 014E 19/09/2017 11:06:59> EMMC Manufacture Date: 1/2016 , Rev: 12 19/09/2017 11:06:59> EMMC NAME: P1J95K , S/N: 0D693D99 , rev. 12 19/09/2017 11:06:59> EMMC NAME (HEX): 50314A39354B 19/09/2017 11:06:59> EMMC ROM 1 (Main User Data) Capacity: 7472 MB (0001D3000000) 19/09/2017 11:06:59> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) 19/09/2017 11:06:59> EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) 19/09/2017 11:06:59> EMMC Permanent Write Protection: No 19/09/2017 11:06:59> EMMC Temporary Write Protection: No 19/09/2017 11:06:59> Extended CSD Information : 19/09/2017 11:06:59> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 19/09/2017 11:06:59> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 19/09/2017 11:06:59> Boot Bus Config: 0x00 , width 1bit 19/09/2017 11:06:59> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 19/09/2017 11:06:59> Supported partition features [PARTITIONING_SUPPORT]: 0x07 19/09/2017 11:06:59> Device supports partitioning features 19/09/2017 11:06:59> Device can have enhanced technological features in partitions and user data area 19/09/2017 11:06:59> Device can have extended partitions attribute 19/09/2017 11:06:59> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 19/09/2017 11:06:59> Backup saved: P1J95K_0D693D99_20170919_110659.extcsd 19/09/2017 11:06:59> EMMC Init completed. 19/09/2017 11:06:59> 19/09/2017 11:06:59> Get firmware version 19/09/2017 11:07:23> 19/09/2017 11:07:24> Brand = htc 19/09/2017 11:07:24> Model = HTC Desire 816G dual sim 19/09/2017 11:07:24> CPU Abi = armeabi-v7a 19/09/2017 11:07:24> Mediatek platform = MT6582 19/09/2017 11:07:24> Android release = 4.4.2 19/09/2017 11:07:24> Firmware version = 1.26.720.002 19/09/2017 11:07:24> Firmware date = Tue May 10 13:06:02 CST 2016 Xin mọi người giúp đỡ...
Mình đã nạp full file check trong Easy Plus hiện thông tin đầy đủ rồi nhưng khi gắn đóng vào máy thì vẫn không lên, có lúc nhận USB BLUK nhưng dùng SP Flashtool nạp báo lỗi 4001, không biết còn cách nào nữa không xin cao nhân chỉ giáo... 19/09/2017 11:06:59> EMMC ROM 1 (Main User Data) Capacity: 7472 MB (0001D3000000) 19/09/2017 11:06:59> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) 19/09/2017 11:06:59> EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) 19/09/2017 11:06:59> EMMC Permanent Write Protection: No 19/09/2017 11:06:59> EMMC Temporary Write Protection: No 19/09/2017 11:06:59> Extended CSD Information : 19/09/2017 11:06:59> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 19/09/2017 11:06:59> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 19/09/2017 11:06:59> Boot Bus Config: 0x00 , width 1bit 19/09/2017 11:06:59> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 19/09/2017 11:06:59> Supported partition features [PARTITIONING_SUPPORT]: 0x07 19/09/2017 11:06:59> Device supports partitioning features 19/09/2017 11:06:59> Device can have enhanced technological features in partitions and user data area 19/09/2017 11:06:59> Device can have extended partitions attribute 19/09/2017 11:06:59> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 19/09/2017 11:06:59> Backup saved: P1J95K_0D693D99_20170919_110659.extcsd 19/09/2017 11:06:59> EMMC Init completed. 19/09/2017 11:06:59> 19/09/2017 11:06:59> Get firmware version 19/09/2017 11:07:23> 19/09/2017 11:07:24> Brand = htc 19/09/2017 11:07:24> Model = HTC Desire 816G dual sim 19/09/2017 11:07:24> CPU Abi = armeabi-v7a 19/09/2017 11:07:24> Mediatek platform = MT6582 19/09/2017 11:07:24> Android release = 4.4.2 19/09/2017 11:07:24> Firmware version = 1.26.720.002 19/09/2017 11:07:24> Firmware date = Tue May 10 13:06:02 CST 2016
Welcome to Medusa Pro Software version 1.4.3. Started. Reader #0: FT SCR2000 0 Reader #1: FT SCR2000 1 Reader #2: Generic EMV Smartcard Reader 0 Please disconnect battery and USB cable. Model Settings: Interface : eMMC Voltage : 2.8V Bus Mode : 1 Bus speed : Auto Connecting... Device : Micron eMMC P1J95K Page size : 512 B Block size : 512 B Block count : 15302656 Size : 7.30 GB --------------------------------------------------------------- CID Info CID : FE014E50314A39354B12193DEE22C23B Manufacturer ID : 0XFE Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X4E Product name : P1J95K Product revision : 1.2 Product serial number : (hex) 193DEE22 Manufacturing date : 12/2015 --------------------------------------------------------------- CSD Info CSD : D06E01320F5913FFFFFFFFEF92400071 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 6 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.6 (for MMC v4.5, v4.51) Erase block size : 8192 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 2048 Kbytes Partition config : 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3825664 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info...Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/P1J95K_19_09_2017_12_25_29.bin. Connect successful. --------------------------------------------------------------- SW: 1.4.3; FW: 1.21. Erasing. Please wait... Done. SW: 1.4.3; FW: 1.21. --------------------------------------------------------------- Selected scatter file: C:/Users/Action05/Desktop/HTC_Desire_816G_DUAL_SIM_1.26.720.002_MT6582_ok/MT6582_Android_scatter.txt. Scatter file type 2. Opened input file: C:/Users/Action05/Desktop/HTC_Desire_816G_DUAL_SIM_1.26.720.002_MT6582_ok/preloader_lcsh82_cwet_kk.bin Found 2 eMMC supported CID: eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : Q7XSAB eMMC CID : 150100513758534142 eMMC Vendor ID : FE (Micron eMMC) eMMC Model ID : 4E01 eMMC Name : P1J95K eMMC CID : FE014E50314A39354B Writing. Please wait... Writing partition PRELOADER... Write data verification is enabled. Write data verification is enabled. Done. Writing partition MBR... Done. Writing partition EBR1... Done. Writing partition UBOOT... Done. Writing partition BOOTIMG... Done. Writing partition RECOVERY... Done. Writing partition SEC_RO... Done. Writing partition LOGO... Done. Writing partition EBR2... Done. Writing partition ANDROID... Done. Writing partition CACHE... Done. Writing partition USRDATA... Done. Writing checksums...Done. Writing finished. SW: 1.4.3; FW: 1.21. Đã dùng Medusa unbrick thành công! Welcome to Medusa Pro Software version 1.4.3. Started. Reader #0: FT SCR2000 0 Reader #1: FT SCR2000 1 Reader #2: Generic EMV Smartcard Reader 0 Please disconnect battery and USB cable. Model Settings: Interface : eMMC Voltage : 2.8V Bus Mode : 1 Bus speed : Auto Connecting... Device : Micron eMMC P1J95K Page size : 512 B Block size : 512 B Block count : 15302656 Size : 7.30 GB --------------------------------------------------------------- CID Info CID : FE014E50314A39354B12193DEE22C23B Manufacturer ID : 0XFE Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X4E Product name : P1J95K Product revision : 1.2 Product serial number : (hex) 193DEE22 Manufacturing date : 12/2015 --------------------------------------------------------------- CSD Info CSD : D06E01320F5913FFFFFFFFEF92400071 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 6 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.6 (for MMC v4.5, v4.51) Erase block size : 8192 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 2048 Kbytes Partition config : 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3825664 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info...Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/P1J95K_19_09_2017_12_25_29.bin. Connect successful. --------------------------------------------------------------- SW: 1.4.3; FW: 1.21. Erasing. Please wait... Done. SW: 1.4.3; FW: 1.21. --------------------------------------------------------------- Selected scatter file: C:/Users/Action05/Desktop/HTC_Desire_816G_DUAL_SIM_1.26.720.002_MT6582_ok/MT6582_Android_scatter.txt. Scatter file type 2. Opened input file: C:/Users/Action05/Desktop/HTC_Desire_816G_DUAL_SIM_1.26.720.002_MT6582_ok/preloader_lcsh82_cwet_kk.bin Found 2 eMMC supported CID: eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : Q7XSAB eMMC CID : 150100513758534142 eMMC Vendor ID : FE (Micron eMMC) eMMC Model ID : 4E01 eMMC Name : P1J95K eMMC CID : FE014E50314A39354B Writing. Please wait... Writing partition PRELOADER... Write data verification is enabled. Write data verification is enabled. Done. Writing partition MBR... Done. Writing partition EBR1... Done. Writing partition UBOOT... Done. Writing partition BOOTIMG... Done. Writing partition RECOVERY... Done. Writing partition SEC_RO... Done. Writing partition LOGO... Done. Writing partition EBR2... Done. Writing partition ANDROID... Done. Writing partition CACHE... Done. Writing partition USRDATA... Done. Writing checksums...Done. Writing finished. SW: 1.4.3; FW: 1.21.