1. Make sure JTAG Connection is 100% OK 2. Phone BATTERY should be CONNECTED!!! 3. Connect RJ-45 JTAG Cable to ATF Box 4. Connect USB Cable to the Phone 5. Click RESET JTAG button to check JTAG Connection 6. Click RESTORE BOOT button to Start Operation ---------------------------------------------------------- Restore Boot... Waiting for Device Connection 20 second(s)...OK Resetting and Exploring JTAG chain...OK Halting Core...OK Initializing Device...Init Write Error at line 2, Access to Memory Not Completed! Restore Boot... Waiting for Device Connection 20 second(s)...OK Resetting and Exploring JTAG chain...OK Halting Core...Retry Resetting and Exploring JTAG chain...OK Halting Core...OK Initializing Device...OK Detecting eMMC #1 ID...1501004A4A53303041037E2D40FB7003 Flash Description: Samsung JJS00A, 3.64 GiB, SN 7E2D40FB, Jul 1997 Partition Config: No boot enabled, Boot ACK OFF (0x00) Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00) Testing Device Memory...OK Sending Flash Loader...OK (92119 Op/Sec) Restoring MBR Data...OK Restoring Partition #1...OK Restoring Partition #2...Flash Write Error at 0x00000200, Loader Error, Code 0x76 Please send this log and "..\Logs\.log" file to support!
