Ẩn / Hiện Quảng Cáo

UFI Software Update

Thảo luận trong 'THIẾT BỊ HỖ TRỢ SỬA CHỮA.' bắt đầu bởi Gsm_songcong, 19/7/17.

  1. 19/7/17 lúc 08:38

    Gsm_songcong

    @ Fan cứng

    Gsm_songcong
    Tham gia:
    3/3/08
    Bài viết:
    1,489
    Được thích:
    643
    UFI Software version 1.2.0.399


    Introducing P2P(BitTorrent) support download
    - Built with Aria2, to enable this function you have to allow the firewall to open when you're prompted to do so
    - To prevent data corruptions, specially to users with limited internet connection, files bigger than 1GB should be downloaded using BitTorrent.
    - Download tasks were cached, so you can resume later (Check "Autosave Unfinished Downloads" in Settings)
    Introducing new app module: UFI CHIP Prog
    - Support SPI NOR Flash, SPI EEprom and I2C EEprom chip
    - Support various type of chip with fast and easy user interface
    - Support for Read, Write, Erase, Verify and Blank check as well as BP Unlock function for some SPI Flashes
    - Usefull for BIOS recovery, Router flashing and so on
    - Documentations and Adapter comming soon
    Introducing new UFIBOX firmware version 1.10
    - UFI software version 1.2.0.399 requires UFIBOX with fw version 1.10
    Support Files changes:
    - Over 3.3TB compressed files uploaded to the support servers
    - Added many popular brands to Android directory
    - Added Schematics, QCN files and USB Drivers
    eMMC ToolBox changes:
    ADD: Auto retry handling in case of un-successfull "Read" because of chips bad block
    ADD: Auto set partition config based on firmware selection on Factory Image write.
    ADD: SANDISK chip Smart and Health report
    BUGFIX: Special Task, Resize function was not handled correctly in some case.
    BUGFIX: FFU routine improved, in some rare case ffu might not be performed correctly.
    Android ToolBox changes:
    ADD: Android SDK Path setting(adb.exe and fastboot.exe path)
    ADD: Confirmation dialog before auto extracting firmwares
    ADD: Special Task menu on the ADB Tab(removed Tool sub tab)
    Most function requires devices to be rooted
    This menus were dinamically changed based on the connected phone.
    Implemented tasks:
    - Clean Viruses
    - OEM-Unlock
    - [Xiaomi] Disable Mi Cloud
    - [Samsung] Exit Factory Mode
    ADD: Support for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
    - Note that most of Helio SoC was fused during production time so -
    some partition might be protected for erase and write, in this case only full erase allowed.
    ADD: Special Task (MediaTek Tab) menus for:
    - [Oppo] Clear Region Lock
    - [Coolpad] Exit Factory Mode
    - [ASUS] Disable Demo Live
    ADD: Enabled erase function for Qualcomm firehose mode(as many users request)
    ADD: Special Task (Qualcomm Tab) menus for:
    - Full erase
    - Full erase (including boot)
    - [Coolpad] Exit Factory Mode
    - [Oppo] Exit Fastboot Mode
    ADD: "Auto sparse" option on fastboot flashing
    Some "system.img" files greater than 2GB may cause fastboot crashes(depend on the fastboot version)
    If this option checked, files greater than 2GB will be "sparsed"
    BUGFIX: Fastboot detection after reboot bug introduced in version 1.2.0.390
    BUGFIX: Workaround for "delayed loading" when opening UFI Android ToolBox
     
  2. 21/7/17 lúc 12:18

    vanviet7785

    Insane Poster

    vanviet7785
    Tham gia:
    27/4/14
    Bài viết:
    550
    Được thích:
    77
    Bán ufi box new full bga...
     
  3. 31/7/17 lúc 16:39

    Gsm_songcong

    @ Fan cứng

    Gsm_songcong
    Tham gia:
    3/3/08
    Bài viết:
    1,489
    Được thích:
    643
    30th July 2017
    [​IMG] UFI_v1.2.0.407_setup.zip
    • eMMC ToolBox changes:
    • ADD: Auto listing brand from "Android ToolBox" firmware directory on Factory Image tab
    • ADD: Custom Ext_CSD preset
    • You can create your own ext_csd custom preset file, see example.txt in Drive:\UFI\emmc\def\Config
    • BUGFIX: Minor bugfixes and improvements
    • Android ToolBox changes:
    • [MediaTek tab]
    • ADD: Storage type selection
    • ADD: Bypass security moved to Special Task
    • [Qualcomm tab]
    • ADD: UFS provisioning support for Qualcomm based devices
    • New "blank" UFS memory should be configured so the flashing procedure can be done.
    • Provisioning task will configure new UFS chip according to device partitions layout.
    • Provisioning UFS is a irrecoverable ONE time operation so make sure to select correct "provisioning xml"
    • ADD: "Show All Partition" option
    • ADD: Partial flashing support from userarea binary
    • ADD: Full erase before flash option
    • ADD: Firmware and partitions validation when loading rawprogram xml
    • ADD: Automated [Oppo] Exit Fastboot Mode on firehose flashing procedure
    • ADD: Support for Official Oppo firmware package (*.ofp)
    • ADD: .tar.bz2 firmware handling to support official Oppo firmware package
    • BUGFIX: [Oppo] Exit Fastboot Mode revised, now it should works on any known firmware variants
    • BUGFIX: Official Oppo firmware package (*.ofp) for Qualcomm Devices
    • BUGFIX: Fixed DA handling for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
    • Vivo MT67xx Devices now supported
    • BUGFIX: Minor bugfixes and improvements
     

Chia sẻ trang này