Samsung Galaxy Tab 3 T111 Repair boot ok

Thienbaogsm · 16/4/16 lúc 10:45

Samsung Galaxy Tab 3 T111 Repair boot ok

Z3X EasyJtag Software ver. 2.0.8.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 060010151F7D5A06, ,FW Ver.: 01.52
CMD Pullup Level:2186 mV
CMD Active Level:2691 mV
HiPower™ mode is off!
eMMC Device Information
EMMC CID : 90014A48384731650503025EB5A56106
EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 06/2014 Rev.0x3
EMMC NAME: H8G1e , S/N: 39761317
EMMC NAME (HEX): 48384731652000
EMMC ROM1 (Main User Data) Capacity: 7440 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x4000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
EMMC GP0 (Extended Partition 1) Capacity: 8MB
Backup saved: H8G1e _ 39761317_20160415_1627.extcsd
Searching for partition tables...
Detected GPT over MBR...
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (MRD) Range: [0X400000,0X5FFE00] ,Len: 200000
MMCBLK0P1 (MRD_BK) Range: [0X600000,0X7FFE00] ,Len: 200000
MMCBLK0P2 (MEP2) Range: [0X800000,0X9FFE00] ,Len: 200000
MMCBLK0P3 (EFS) Range: [0XA00000,0X1DFFE00] ,Len: 1400000
MMCBLK0P4 (RESERVED) Range: [0X1E00000,0X2BFFE00] ,Len: E00000
MMCBLK0P5 (LOKE_2ND) Range: [0X2C80000,0X2DFFE00] ,Len: 180000
MMCBLK0P6 (LOKE_1ST) Range: [0X2E80000,0X2FFFE00] ,Len: 180000
MMCBLK0P7 (PARAM) Range: [0X3000000,0X3FFFE00] ,Len: 1000000
MMCBLK0P8 (RECOVERY) Range: [0X4000000,0X4FFFE00] ,Len: 1000000
MMCBLK0P9 (KERNEL) Range: [0X5000000,0X5FFFE00] ,Len: 1000000
MMCBLK0P10 (MODEM) Range: [0X6000000,0X77FFE00] ,Len: 1800000
MMCBLK0P11 (NVM) Range: [0X7800000,0X87FFE00] ,Len: 1000000
MMCBLK0P12 (HIDDEN) Range: [0X8800000,0X14FFFE00] ,Len: C800000
MMCBLK0P13 (CACHE) Range: [0X15000000,0X2A7FFE00] ,Len: 15800000
MMCBLK0P14 (SYSTEM) Range: [0X2A800000,0X898FFE00] ,Len: 5F100000
MMCBLK0P15 (USER) Range: [0X89900000,0X1D1EFFE00] ,Len: 148600000
Done...Presets has been updated...

Done.

Checking NAND Image : C:\Users\lehuan\Desktop\T111\EMMC_ROM1_00000000_20000000.bin
File successefuly loaded!
Found ROM2 and automatically selected.
Found EXT CSD and automatically selected.
Processing file...C:\Users\lehuan\Desktop\T111\EMMC_ROM1_00000000_20000000.bin
Processing file...C:\Users\lehuan\Desktop\T111\EMMC_ROM2_00000000_200000.bin
ROM3 Are not selected , skip writing ROM3
Processing file...C:\Users\lehuan\Desktop\T111\SEM08G_ 179187023_20140906_1513.extcsd
Z3X EasyJtag Software ver. 2.0.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2186 mV
CMD Active Level:2691 mV
Input file : C:\Users\lehuan\Desktop\T111\EMMC_ROM1_00000000_20000000.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 3847 kB/s

Z3X EasyJtag Software ver. 2.0.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2186 mV
CMD Active Level:2691 mV
Input file : C:\Users\lehuan\Desktop\T111\EMMC_ROM2_00000000_200000.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 988 kB/s

Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.0.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2186 mV
CMD Active Level:2691 mV
Writing...
Done.
Click to expand...

Samsung Galaxy Tab 3 T111 Repair boot ok

Thienbaogsm

Crazy Poster

Chia sẻ trang này

Tìm kiếm hữu ích

Samsung Galaxy Tab 3 T111 Repair boot ok

Thienbaogsm

Crazy Poster

Chia sẻ trang này