Mã: ----------------------------------------------------------------------------------- To connect SCL24 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Restart phone. 11. Press "Read Info" in software. ----------------------------------------------------------------------------------- To connect SM-G935U phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM17 Selected model: SM-G935U Connecting to server... Connecting to server...Ok! Checking resource files... Downloading resources... All necessary resource files have been downloaded successfully. Please put the phone into Download Mode and connect USB cable. To put SM-G935U into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Waiting for phone... Firmware write started. Writing Boot section... Boot section has been written successfully. Searching for a phone. Please wait... Phone found. Resetting FRP lock.. Performed by 2.4.6 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM17 Selected model: SM-G935U Searching for a phone (waiting for ADB device)... Reading info... Detected phone model: SM-G935U Firmware compiled date: Fri Sep 9 20:30:48 KST 2016 PDA version: G935UUEU4API3 CSC version: G935UOYM4API3 SW version: G935UUEU4API3 Phone SN: RF8H61JNP8Z Android version: 6.0.1 (MMB29M) Sales code: XAA Country: USA HW platform: msm8996 HW Chip: MSM8996 HW Modem: MSM8996 Security patch level: 2016-09-01 Codename: hero2qlteue Resetting FRP lock.. FRP lock is successfully reseted! Goto "Backup and reset" and make "Factory data reset" Performed by 2.4.6 Software version.
