repair boot lumia 625 lỗi

log đây cần ae giúp
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 625 V1.0.5280.5626]

Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - IGNORED!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x42): Communication is not established. Terminating.

 

lên nhờ ae giúp ạ ,

 

Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Đổi lại 5 mhz 8mhz ... thử xem

 

giờ thì báo này các bác ạ
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 625 V1.0.5280.5626]

Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: No response from the RIFF Box.

 

ae giup em với ạ ,...

 

giúp em với ạ
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 625 V1.0.5280.5626]

Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.

 

có ATF jtag rep xem sao nhiều khi box này không được box khác ok

 

em ko có jaf bác à...

 

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 625 V1.0.5280.5626]

Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data length received.

 

có atf thì reapir đi bác.