tình hình nhận con oppo 827 lênh chớp tắc câu pinout apter thì báo lổi EMMC CID : 90014A483447316404050BA1CE93719E EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacturer ID: 0090 , OEM ID: 014A EMMC Date: 07/2014 Rev.0x5 EMMC NAME: H4G1d , S/N: 195153555 EMMC NAME (HEX): 48344731642000 Can't init EMMC, Reason: DATA RCV CRC Error Check Data Line! Done. em đục ra đóng vào apter repai rời thì ok logo em nó sao khi repai eMMC_tool Suite ver. 1.0.0.42 Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385) Looking for EasyJTAG box... EasyJTAG API ver. 2008 Setting IO Levels to 2.8V Setting frequence to 14 Mhz HiPower mode is OFF Changelog: 11.12.2016 (ver 1.0.0.42) Fix: Fixed force erase timeouts detection (Universal Factory Format) 08.12.2016 (ver 1.0.0.41) Fix: Bugs that have been found through your crash report 02.12.2016 (ver 1.0.0.40) Fix: Bug with switching ROM Fix: Bug with access to GP-partitions Fix: Bug when searching for FRP Add: Generic / Universal Factory Format (Toshiba, Hynix, etc.) 30.11.2016 (ver 1.0.0.39) Fix: Bug with the smart card at the start of the program Fix: Bug when processing sparse image Fix: Bug with extract data from contacts2.db Fix: Writing for some MTK images Fix: Bug when opening MTK-partitions in the Explorer Add: Reading tables from emmc on the Factory tab (for writing partitions if you do not have a header file) Add: Support GP-partitions Add: Option "Write all eMMC Regions at once" Add: Automatically sending crash reports Add: Button "Sending crash report for the current log" Add: Notification in the system tray Add: Adding ROM2 when reading from the image Add: Automatic writing configuration for MTK after flashing Add: Some GUI changes HiPower mode is OFF CMD Pullup Level: 1763 mV Error: Previous operation is not finished yet. CMD Active Level: 2258 mV Can't init device. Reason: CARD Data FIFO Timeout Error HiPower mode is OFF CMD Pullup Level: 1763 mV Error: Previous operation is not finished yet. CMD Active Level: 2279 mV Can't init device. Reason: CARD Data FIFO Timeout Error HiPower mode is OFF CMD Pullup Level: 1773 mV CMD Active Level: 2763 mV EMMC Device Information : EMMC CID: 7001004D4D43303447020858E2D790CE EMMC CSD: D04F01320F5903FFFFFFFFE78A400050 EMMC Manufacture Name: KINGSTONE EMMC NAME: MMC04G , S/N: 0858E2D7 , rev. 02 EMMC NAME (HEX): 4D4D43303447 EMMC ROM 1 (Main User Data) Capacity: 3628 MB (0000E2C00000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Backup saved: MMC04G_0858E2D7_20170101_203542.extcsd EMMC Init completed. HiPower mode is OFF CMD Pullup Level: 1773 mV CMD Active Level: 2763 mV EMMC Device Information : EMMC CID: 7001004D4D43303447020858E2D790CE EMMC CSD: D04F01320F5903FFFFFFFFE78A400050 EMMC Manufacture Name: KINGSTONE EMMC NAME: MMC04G , S/N: 0858E2D7 , rev. 02 EMMC NAME (HEX): 4D4D43303447 EMMC ROM 1 (Main User Data) Capacity: 3628 MB (0000E2C00000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Backup saved: MMC04G_0858E2D7_20170101_203611.extcsd EMMC Init completed. Opening file: MT6582_Android_scatter.txt The new format of scatter config_version: V1.1.1 platform: MT6582 preloader.bin Found 2 supported eMMC CID: name = 'KJS00M' hex = 0x4B4A5330304D [SAMSUNG] name = 'H4G1d' hex = 0x483447316404 [SKHYNIX] Error: eMMC has a small size The size of the last section has been updated Warning: Preloader does not contain your EMMC CID. Make sure that your emmc matches the parameters HiPower mode is OFF CMD Pullup Level: 1763 mV CMD Active Level: 2774 mV EMMC Device Information : EMMC CID: 7001004D4D43303447020858E2D790CE EMMC CSD: D04F01320F5903FFFFFFFFE78A400050 EMMC Manufacture Name: KINGSTONE EMMC NAME: MMC04G , S/N: 0858E2D7 , rev. 02 EMMC NAME (HEX): 4D4D43303447 EMMC ROM 1 (Main User Data) Capacity: 3628 MB (0000E2C00000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Backup saved: MMC04G_0858E2D7_20170101_203743.extcsd EMMC Init completed. Reading from: ROM2 , start: 0x000000000000 , size: 0x000000200000 Output file: D:\FILES FLASH\EasyJTAG\OPPO R827\EMMC_MMC04G_ROM2_000000000000_000000200000.bin eMMC switching to ROM2 Reading partition... Done reading partition. Read speed: 996.77 Kb/s HiPower mode is OFF CMD Pullup Level: 1773 mV CMD Active Level: 2763 mV EMMC Device Information : EMMC CID: 7001004D4D43303447020858E2D790CE EMMC CSD: D04F01320F5903FFFFFFFFE78A400050 EMMC Manufacture Name: KINGSTONE EMMC NAME: MMC04G , S/N: 0858E2D7 , rev. 02 EMMC NAME (HEX): 4D4D43303447 EMMC ROM 1 (Main User Data) Capacity: 3628 MB (0000E2C00000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Backup saved: MMC04G_0858E2D7_20170101_203847.extcsd EMMC Init completed. đóng vào dẩn chớp tắc ace nào làm qua xin hướng dẩn giúp thank! all
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000) EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) hình như lỗi ở đây nè thớt
