R2001 repair emmc fail cần giúp

em xóa xong config partition lại thì fail dòng cuối như vậy là bị gì anh em xem giúp em với
EMMC CID : 90014A4838473264040503A2BF111288
EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 01/2015 Rev.0x5
EMMC NAME: H8G2d , S/N: 60997393
EMMC NAME (HEX): 48384732642000
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H8G2d _ 60997393_20170113_1430.extcsd
Done.
Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2062 mV
CMD Active Level:3011 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
Erasing 00400000 bytes from 00000000 ...ROM1
Erase Done.
Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2062 mV
CMD Active Level:3011 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
Erasing 00400000 bytes from 00000000 ...ROM2
Erase Done.
Running:eMMC: Factory Format...
Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2062 mV
CMD Active Level:3011 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
Formatting eMMC card, please wait up to 3 min...
Setting Service Mode...
eMMC Format Done.
Done.
Running:JEDEC: Partitions config burn...
Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2062 mV
CMD Active Level:3011 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
Partition configuration:
No enhanced user data area
User partition write reliability: on
No GP1 partition
GP1 write reliability: on
No GP2 partition
GP2 write reliability: on
No GP3 partition
GP3 write reliability: on
No GP4 partition
GP4 write reliability: on
Card already partitioned
HW Parts Config Fail.
với lại anh em cho hỏi thêm con này là loại 4gb hay 8gb vậy

 

em flash lại bằng flashtool thì lổi 4032

 

8gb và con này đã làm 1 lần rồi à

 

EMMC ROM1 (Main User Data) Capacity: 7456 MB
8g lấy flashtool chạy chưa

 

để em tải rom 8gb về chạy thử đã nãy em chạy rom 4gb

 

làm easy jtag mà ko biết đọc thông số log à bác thầy bác đâu ?

 

box này em mới mua nên chưa rành anh ơi thấy log này
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
cũng nghĩ là 8gb nhưng muốn hỏi anh em cho chắc ăn anh

 

EMMC ROM1 (Main User Data) Capacity: 7456 MB = 8gb
EMMC ROM1 (Main User Data) Capacity: 34xx MB =4gb
EMMC ROM1 (Main User Data) Capacity: 15xx MB = 16gb