Nolấy EasyJTAG Tool sữa lỗi emmc ace giúp em mới mua chưa biết làm ace làm qua giúp em EMMC CID : 90014A483447316404050EA2F5E0220A EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacturer ID: 0090 , OEM ID: 014A EMMC Date: 02/2015 Rev.0x5 EMMC NAME: H4G1d , S/N: 245560800 EMMC NAME (HEX): 48344731642000 EMMC ROM1 (Main User Data) Capacity: 3728 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01 --------------------------------------------- Backup saved: H4G1d _ 245560800_20170205_0652.extcsd Done. Running:JEDEC: Partitions config burn... Z3X EasyJtag Software ver. 2.5.0.4 Skip loading eMMC Addon Firmware CMD Pullup Level:3186 mV CMD Active Level:3269 mV Box IO Level:3300 mV CLK Rate:14000 khz Partition configuration: No enhanced user data area User partition write reliability: off No GP1 partition GP1 write reliability: on No GP2 partition GP2 write reliability: on No GP3 partition GP3 write reliability: on No GP4 partition GP4 write reliability: on Card already partitioned HW Parts Check Fail.
eMMC_tool Suite ver. 1.0.0.42 Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.22177) Looking for EasyJTAG box... EasyJTAG API ver. 2008 Setting IO Levels to 3.3V Setting frequence to 14 Mhz HiPower mode is OFF EasyJTAG Box Serial = 0F00A01C05873C69 Card Serial = AA5D-178A EasyJTAG Box Firmware = 01.58 Changelog: 11.12.2016 (ver 1.0.0.42) Fix: Fixed force erase timeouts detection (Universal Factory Format) 08.12.2016 (ver 1.0.0.41) Fix: Bugs that have been found through your crash report 02.12.2016 (ver 1.0.0.40) Fix: Bug with switching ROM Fix: Bug with access to GP-partitions Fix: Bug when searching for FRP Add: Generic / Universal Factory Format (Toshiba, Hynix, etc.) 30.11.2016 (ver 1.0.0.39) Fix: Bug with the smart card at the start of the program Fix: Bug when processing sparse image Fix: Bug with extract data from contacts2.db Fix: Writing for some MTK images Fix: Bug when opening MTK-partitions in the Explorer Add: Reading tables from emmc on the Factory tab (for writing partitions if you do not have a header file) Add: Support GP-partitions Add: Option "Write all eMMC Regions at once" Add: Automatically sending crash reports Add: Button "Sending crash report for the current log" Add: Notification in the system tray Add: Adding ROM2 when reading from the image Add: Automatic writing configuration for MTK after flashing Add: Some GUI changes HiPower mode is OFF CMD Pullup Level: 3392 mV CMD Active Level: 3289 mV EMMC Device Information : EMMC CID: 90014A483447316404050EA2F5E0220A EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacture Name: SKHYNIX EMMC NAME: H4G1d , S/N: 0EA2F5E0 , rev. 05 EMMC NAME (HEX): 483447316404 EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Backup saved: H4G1d_0EA2F5E0_20170206_080730.extcsd EMMC Init completed. HiPower mode is OFF CMD Pullup Level: 3454 mV CMD Active Level: 3248 mV EMMC Device Information : EMMC CID: 90014A483447316404050EA2F5E0220A EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacture Name: SKHYNIX EMMC NAME: H4G1d , S/N: 0EA2F5E0 , rev. 05 EMMC NAME (HEX): 483447316404 EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Backup saved: H4G1d_0EA2F5E0_20170206_080747.extcsd EMMC Init completed. Opening file: MT6572_Android_scatter.txt The new format of scatter config_version: V1.1.1 platform: MT6572 preloader.bin Found 3 supported eMMC CID: name = ' XINYH' hex = 0x2058494E5948 [SKHYNIX] name = 'H4G1d' hex = 0x483447316404 [SKHYNIX] name = '004G90' hex = 0x303034473930 [TOSHIBA] The size of the last section has been updated HiPower mode is OFF CMD Pullup Level: 3320 mV CMD Active Level: 3454 mV EMMC Device Information : EMMC CID: 90014A483447316404050EA2F5E0220A EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacture Name: SKHYNIX EMMC NAME: H4G1d , S/N: 0EA2F5E0 , rev. 05 EMMC NAME (HEX): 483447316404 EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Backup saved: H4G1d_0EA2F5E0_20170206_080752.extcsd EMMC Init completed. Operation: Write by vendor (MediaTek) Partition name: PRELOADER Filename: preloader.bin , Offset: 000000000000 , filesize: 103844 bytes eMMC switching to ROM2 Erasing partition... Writing partition... Done writing partition. Write speed: 322,71 Kb/s Partition name: MBR Filename: MBR.bin , Offset: 000000C00000 , filesize: 4096 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 500,64 Kb/s Partition name: EBR1 Filename: EBR1.bin , Offset: 000000C80000 , filesize: 4096 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 436,61 Kb/s Partition name: PRO_INFO Filename: pro_info.bin , Offset: 000000D00000 , filesize: 1183744 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1487,20 Kb/s Partition name: NVRAM Filename: nvram.bin , Offset: 000001000000 , filesize: 5115904 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1500,42 Kb/s Partition name: PROTECT_F Filename: protect_f.bin , Offset: 000001500000 , filesize: 6299648 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1489,54 Kb/s Partition name: PROTECT_S Filename: protect_s.bin , Offset: 000001F00000 , filesize: 6295552 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1507,90 Kb/s Partition name: SECCFG Filename: seccfg.bin , Offset: 000002900000 , filesize: 4096 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 490,23 Kb/s Partition name: UBOOT Filename: uboot.bin , Offset: 000002920000 , filesize: 278528 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 828,74 Kb/s Partition name: BOOTIMG Filename: bootimg.bin , Offset: 000002980000 , filesize: 4890624 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 937,83 Kb/s Partition name: RECOVERY Filename: recovery.bin , Offset: 000002F80000 , filesize: 5820416 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 937,86 Kb/s Partition name: SEC_RO Filename: secro.bin , Offset: 000003980000 , filesize: 135168 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1433,03 Kb/s Partition name: MISC Filename: misc.bin , Offset: 000003F80000 , filesize: 147456 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1356,01 Kb/s Partition name: LOGO Filename: logo.bin , Offset: 000004000000 , filesize: 454656 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 802,42 Kb/s Partition name: EBR2 Filename: EBR2.bin , Offset: 000004300000 , filesize: 4096 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 468,62 Kb/s Partition name: OPPO_CUSTOM Filename: oppo_custom.bin , Offset: 000004380000 , filesize: 4096 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 430,33 Kb/s Partition name: RESERVE1 Filename: reserve1.bin , Offset: 000004480000 , filesize: 4096 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 469,16 Kb/s Partition name: RESERVE2 Filename: reserve2.bin , Offset: 000006480000 , filesize: 4538368 bytes eMMC switching to ROM1 Erasing partition... Error erasing at address: 000007100000 ... Retry #1 Writing partition... Done writing partition. Write speed: 1509,62 Kb/s Partition name: EXPDB Filename: expdb.bin , Offset: 000007480000 , filesize: 4096 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 439,63 Kb/s Partition name: ANDROID Filename: system.bin , Offset: 000007E80000 , filesize: 881082368 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Error writing at address: 00000AD00000 ... Retry #1 Error writing at address: 00000AD00000 ... Retry #2 Error writing at address: 00000AD00000 ... Retry #3 Too many errors. Writing has been stopped ace giúp em với mới mua box chưa biết làm
Emmc này đã bị can thiệp box rồi huynh ạh, như e gặp những con như này thì trả luôn, vì tỉ lệ sống lại ko cao
