Nhận con a11w thay ổ cứng ,kiếm được cái main sam sung đóng vao main jag bus thấy toàn O kb ,anh em gặp rồi xin ý kiến EasyJtag Suite Classic ver.: 2.5.0.6 / wxWidgets 3.1.0-W-U started. OS ver.: Windows 7 (build 7601, Service Pack 1). Admin rights OK undefined Android Explorer ver.: 1.0.0.21 eMMC ODIN ver.: 1.0.11.0 Successfully connected to box on COM5 Box S/N: 1801100957035D93, ,FW Ver.: 01.58 Box Working Mode: JTAG Box. Box Drivers version: 3.0.1.0, are OK Z3X Card Serial : AA70-023F , ver: 22 Z3X Card Activation [LG] : NOT ACTIVATED Z3X Card Activation [SAMS] : NOT ACTIVATED Z3X Card Activation [JTAG] : ACTIVATED Z3X EasyJtag Software ver. 2.5.0.6 Loading eMMC Addon Firmware... IO: 1800 mV Box S/N: 1801100957035D93, ,FW Ver.: 01.58 CMD Pullup Level:1196 mV CMD Active Level:2763 mV Box IO Level:1800 mV CLK Rate:14000 khz HiPower mode is off! ---------- eMMC Device Information ---------- EMMC CID : 65646F4D204D4F5200000000000000A4 EMMC CSD : D07FFF320F59007FF6DB80001E40001C EMMC Manufacturer ID: 0065 , OEM ID: 646F EMMC Date: 00/2013 Rev.0x0 EMMC NAME: M MOR , S/N: 0 EMMC NAME (HEX): 4D204D4F522000 EMMC ROM1 (Main User Data) Capacity: 128 MB EMMC ROM2 (Boot Partition 1) Capacity: 0 kB EMMC ROM3 (Boot Partition 2) Capacity: 0 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.5 (MMC 4.41) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x00 Device NOT support partitioning feature Device cannot have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: M MOR _ 0_20171123_0839.extcsd Searching for partition tables... Partitioning not detected... Done.
