Mở Khóa Gmail (FRP) Samsung J500H By Z3X Box Nhận Mở Khóa Gmail (FRP) Samsung J500H Qua Team Cho A/E không có Box Mã:Searching Samsung USB Flash interface... COM16 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Samsung J500H Remove FRP By TeamviewerMã:Selected model: SM-J500H Selected port: Software version: 27.8 Searching Samsung USB Flash interface... COM68 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Samsung J500H Xóa Xác Minh Tài Khoản Gmail Bằng Z3X ProMã:Searching Samsung USB Flash interface... COM45 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.27.8
Samsung J500H Xóa Xác Minh Tài Khoản Gmail Bằng Box Z3X Pro Nhận Xóa FRP J500H Qua Teamviewer Mã:Searching Samsung USB Flash interface... COM8 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Samsung J500H Xóa FRP By Z3X Pro Samsung J500H Xóa Xác Minh Tài Khoản Gmail By Z3X ProMã:@thanhnamPDAviet Searching Samsung USB Flash interface... COM8 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Samsung J500H Khóa Xác Minh Tài Khoản Gmail Samsung J500H Xóa Xác Minh Tài Khoản Gmail By Z3X ProMã:@thanhnamPDAviet Operation: Reset FRP/React/EE Selected model: SM-J500H Software version: 28.2 Searching Samsung USB Flash interface... COM4 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Samsung J500H Khóa Xác Minh Tài Khoản Gmail (FRP) Samsung J500H Xóa Xác Minh FRP By Z3X ProMã: UNLOCK INSTRUCTIONS: 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Type *#9090# and select 'DM/DUN over HSIC'. Or use 'Activate Diag' function from 'Repair' tab. 4. Connect the phone to PC with USB cable, install drivers if needed. 5. Select diagnostic port in port settings. 6. Press 'Unlock' button for direct unlock. To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' and follow the instructions in program. 5. When process done, press 'Back' on phone and perform factory reset from phone settings. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. Operation: Reset FRP/React/EE Selected model: SM-J500F Software version: 28.3 Searching Samsung USB Flash interface... COM41 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.28.3
không ai giúp em, thôi em tự xử luôn, hôm nay chủ nhật rảnh, nên vọc phá tý, cuối cùng cũng xong sẵn tiện chia sẽ anh em luôn tải về https://www.mediafire.com/?5pmv3k2kuabfy7i trong file có rom, tool và hướng dẫn cụ thể, kèm video
Samsung J500FN Xóa Xác Minh Tài Khoản Gmail By Z3X ProMã: UNLOCK INSTRUCTIONS: 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Type *#9090# and select 'DM/DUN over HSIC'. Or use 'Activate Diag' function from 'Repair' tab. 4. Connect the phone to PC with USB cable, install drivers if needed. 5. Select diagnostic port in port settings. 6. Press 'Unlock' button for direct unlock. To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' and follow the instructions in program. 5. When process done, press 'Back' on phone and perform factory reset from phone settings. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. Operation: Reset FRP/React/EE Selected model: SM-J500FN Software version: 28.8 Searching Samsung USB Flash interface... COM31 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.28.8
Samsung J500H Xóa Xác Minh Tài Khoản Gmail By Z3X ProMã: UNLOCK INSTRUCTIONS: 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Type *#9090# and select 'DM/DUN over HSIC'. Or use 'Activate Diag' function from 'Repair' tab. 4. Connect phone to PC with USB cable, install drivers if needed. 5. Select diagnostic port in port settings. 6. Press 'Unlock' button for direct unlock. To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' and follow the instructions in program. 5. When process done, press 'Back' on phone and perform factory reset from phone settings. To reset Google account activation or Samsung reactivation lock: 1. Power on phone in download mode (turn off phone, press vol.down + home + power). 2. Connect phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. Operation: Reset FRP/React/EE Selected model: SM-J500H Selected port: Software version: 28.1 Searching Samsung USB Flash interface... COM11 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.28.1
Samsung J500H Xóa Xác Minh Tài Khoản Gmail (FRP) By Z3X ProMã:@thanhnamPDAviet Operation: Reset FRP/React/EE Selected model: SM-J500H Software version: 28.8 Searching Samsung USB Flash interface... COM31 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Samsung J5 J500H Xóa Xác Minh Tài Khoản Gmail (FRP) By Z3X ProMã:@thanhnamPDAviet Operation: Reset FRP/React/EE Selected model: SM-J500H Software version: 28.8 Searching Samsung USB Flash interface... COM31 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Samsung J500H Khóa Xác Minh Tài Khoản Gmail Samsung J500H Xóa FRP By Z3X ProMã:@thanhnamPDAviet Operation: Reset FRP/React/EE Selected model: SM-J500H Selected port: Software version: 28.1 Searching Samsung USB Flash interface... COM11 detected Setup connection... Ok Reading PIT from phone... Ok Searching FRP lock... Ok Erasing FRP lock... Ok Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
