LG Optimus One P500 Repair boot ok [2/7/2017 10:18:02 AM] [START OPERATION_ID = RESURRECT] [2/7/2017 10:19:30 AM] Open serial port...OK [2/7/2017 10:19:30 AM] Connecting to the RIFF Box...OK [2/7/2017 10:19:30 AM] Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.65 [2/7/2017 10:19:30 AM] Selected Resurrector: [LG P500 V1.00] [2/7/2017 10:19:30 AM] [2/7/2017 10:19:30 AM] Connecting to the dead body...OK [2/7/2017 10:19:30 AM] Detected dead body ID: 0x203C00E1 - CORRECT! [2/7/2017 10:19:30 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [2/7/2017 10:19:30 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [2/7/2017 10:19:30 AM] [2/7/2017 10:19:30 AM] Resurrection sequence started. [2/7/2017 10:19:30 AM] Establish communication with the phone...OK [2/7/2017 10:19:30 AM] Initializing internal hardware configuration...OK [2/7/2017 10:19:30 AM] Uploading resurrector data into memory...OK [2/7/2017 10:19:30 AM] Starting communication with resurrector...OK [2/7/2017 10:19:30 AM] [2/7/2017 10:19:30 AM] Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BC (512MB) [2/7/2017 10:19:30 AM] Flashing the dead body...OK [2/7/2017 10:19:30 AM] Resurrection complete! [2/7/2017 10:19:30 AM] [FINISH OPERATION_ID = RESURRECT]
