như tiêu đề em repair boot bằng riff box nó báo lỗi như này nhờ cao thủ vào giúp em xin chân thành cám ơn ạ Open serial port...OKConnecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [LG LU6200 V1.0.5025.52349] Connecting to the dead body...OK Detected dead body ID: 0x105310E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0006/0x0000 (16, 0x0000D7800000 Bytes = 3.37 GB) Detected an Initialized FLASH2 Chip, ID: 0x0006/0x0000 (16, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body... WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess. ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x020000)
