Huawei LYO-L02 (Y6 Elite) Unlock Network - Remove FRP Done

Huawei LYO-L02 (Y6 Elite) Unlock Network - Remove FRP Done
Huawei LYO-L02 (Y6 Elite) Unlock Network - Remove By NCK

Mã:

@thanhnamPDAviet
 ----------------------------------------------------
 BaseBand CPU :MT6735
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100513331334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000	 
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000	  [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 -Reading GPT Drive OK
 IMEI[1]: @thanhnamPDAviet
 IMEI[2]: @thanhnamPDAviet
 Reading security, wait...
 SIM[1]: 
 Block1(N): Unlocked (remain:255) Code : 12345678 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Unlocked (remain:255) Code : 12345678 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 [SIM_EX_2]Unlocking target...please wait.
 [0]Unlock finished.
 [1]Unlock finished.
 [2]Unlock finished.
 [3]Unlock finished.
 Wait untill phone will start charging.
 All done.
 
 
@thanhnamPDAviet
 ----------------------------------------------------
 BaseBand CPU :MT6735
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100513331334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000	 
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000	  [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 -Reading GPT Drive OK
 [1]locksettings.db erased ok
 [1]locksettings.db-wal erased ok
 [1]locksettings.db-shm erased ok
 [1]password.key erased ok
 [1]gesture.key erased ok
 If phone remain on logo, repower phone again.
 If lock remain, perform 2 times reset without power on phone.
 Wait untill phone will start charging.
 All done.
 
 
@thanhnamPDAviet
Connecting Fastboot .......
Connecting Fastboot .......Ok
Model Phone: LYO-L21
SW: LYO_L21C577B128
Connecting Server .....
Connecting Server .....Ok
Erase Done , The Device Will Reboot And Factory Reset
Reboot ...............OK