cần ae giúp em nhận con chạy tv hồi trước thì tháo máy ra câu tespoin để unlock boot loader không biết bây giờ atf có support unlockboot loader bang usb không cần tháo máy chưa, ae nào biết xin giúp em vé thank nhiều
máy này tháo ra tháo vào cũng nguy hiểm , làm bang usb thì tốt quá , với lại còn gỡ siêu ra nên cũng ngán ngán
em test connetion ok nhưng bấm repaidboot báo lỗi ae xem dùm em Lumia 900 Detected eMMC Device Information Manufacturer ID: FE Device Type : Embedded BGA Application ID : 4E Product Name : MMC16G Product Rev : 2.7 Product SN : EC7AD935 Manufactured : January 2012 Card Specific Data CSD_STRUCTURE : Extended SPEC_VERS : Version 4.1/4.2/4.3 TAAC : 300 ns TRAN_SPEED : 4000000 KHz READ_BL_LEN : 512 Bytes C_SIZE : HIGH CAPACITY WP_GRP_ENABLE : YES WRITE_BL_LEN : 512 Bytes CONTENT_PROT_APP : NO PERM_WRITE_PROTECT: NO TMP_WRITE_PROTECT : NO Extended CSD Saved: FE014E4D4D4331364727EC7AD9351F75.ext_csd Backup Directory: C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\ và repaidboot báo lỗi thế này Interface Reset OK! eMMC Access Type: SECTOR MODE eMMC Supported Voltage Range: 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V 3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V CID : FE014E4D4D4331364727EC7AD9351F75 CSD : D04F01320F5903FFFFFFFFFF8A400001 eMMC Boot Information Revision 1.5 (for MMC v4.41) BOOT PARTITION : USER AREA PARTITION ACCESS : R/W USER PARTITION PERM_BOOT_CFG_PROT : DISABLED PWR_BOOT_CFG_PROT : DISABLED BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED RESET BUS WIDTH : ENABLED eMMC FirmW UPDATE : DISABLED EMMC CACHE SIZE : 0 KB SUPER PAGE SIZE : 3584 KB HC ERASE GROUP SIZE: 8192 KB USER AREA SIZE : 15636365312 BYTES BOOT PARTITION SIZE: 128 KB RPMB PARTITION SIZE: 128 KB Lumia 900 Detected eMMC Device Information Manufacturer ID: FE Device Type : Embedded BGA Application ID : 4E Product Name : MMC16G Product Rev : 2.7 Product SN : EC7AD935 Manufactured : January 2012 Card Specific Data CSD_STRUCTURE : Extended SPEC_VERS : Version 4.1/4.2/4.3 TAAC : 300 ns TRAN_SPEED : 4000000 KHz READ_BL_LEN : 512 Bytes C_SIZE : HIGH CAPACITY WP_GRP_ENABLE : YES WRITE_BL_LEN : 512 Bytes CONTENT_PROT_APP : NO PERM_WRITE_PROTECT: NO TMP_WRITE_PROTECT : NO Extended CSD Saved: FE014E4D4D4331364727EC7AD9351F75.ext_csd Backup Directory: C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\ Writing MBR... Write Success! Writing DBL... Block Write CRC Error 0x01 5E Write Block Error ERROR: Block Write Failed at 0x00000001 Check your Test Point Soldering! ERROR: WRITE FAILED! Total Elapsed Time 00:00:01
em hàn rất chuẩn rồi chạy vẫn báo lỗi như thế này đuợc 6% Card Specific Data CSD_STRUCTURE : Extended SPEC_VERS : Version 4.1/4.2/4.3 TAAC : 300 ns TRAN_SPEED : 4000000 KHz READ_BL_LEN : 512 Bytes C_SIZE : HIGH CAPACITY WP_GRP_ENABLE : YES WRITE_BL_LEN : 512 Bytes CONTENT_PROT_APP : NO PERM_WRITE_PROTECT: NO TMP_WRITE_PROTECT : NO Extended CSD Saved: FE014E4D4D4331364727EC7AD9351F75.ext_csd Backup Directory: C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\ Writing MBR... Write Success! Writing DBL... Block Write CRC Error 0x01 5E Block Write CRC Error 0x01 5E Block Write CRC Error 0x01 5E Block Write CRC Error 0x01 5E ERROR: Block Write Failed at 0x00000045 Check your Test Point Soldering! ERROR: WRITE FAILED! Total Elapsed Time 00:00:05
