máy nhận khách tự nhiên mất nguồn căm pc thấy nhận usb em repair boot báo lỗi, fomat emmc thì báo lỗi như này ae ai biết chỉ giúp e với ạ! có phải emmc đi bụi rùi ko ạ? eMMC Boot Information Revision 1.5 (for MMC v4.41) BOOT PARTITION : NOT BOOT ENABLED PARTITION ACCESS : R/W USER PARTITION PERM_BOOT_CFG_PROT : DISABLED PWR_BOOT_CFG_PROT : DISABLED BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED RESET BUS WIDTH : ENABLED eMMC FirmW UPDATE : DISABLED EMMC CACHE SIZE : 0 KB SUPER PAGE SIZE : 3584 KB HC ERASE GROUP SIZE: 512 KB USER AREA SIZE : 15634268160 BYTES BOOT PARTITION SIZE: 2048 KB RPMB PARTITION SIZE: 128 KB eMMC Device Information Manufacturer ID: SAMSUNG Device Type : Embedded BGA Application ID : 00 Product Name : MAG2GA Product Rev : 0.6 Product SN : 65119DFB Manufactured : January 2012 Card Specific Data CSD_STRUCTURE : Extended SPEC_VERS : Version 4.1/4.2/4.3 TAAC : 13 ns TRANS_SPEED : 4000000 KHz READ_BL_LEN : 512 Bytes C_SIZE : HIGH CAPACITY WP_GRP_ENABLE : YES WRITE_BL_LEN : 512 Bytes CONTENT_PROT_APP : NO PERM_WRITE_PROTECT: NO TMP_WRITE_PROTECT : NO Extended CSD Saved: 1501004D41473247410665119DFB_999A3806.ext_csd Backup Directory: C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\ Task Selected: Samsung Factory Format ====================================================== For eMMC Revision 1.5 (for MMC v4.41) and LOWER --> This will ERASE USER AREA, BOOT1, BOOT2, RPMB and EXT_CSD R/W/E Entries For eMMC Revision 1.6 (for MMC v4.5) and HIGHER --> This will ONLY ERASE USER AREA ====================================================== This eMMC is: Revision 1.5 (for MMC v4.41) Samsung Factory Format Start... ERROR: SAMSUNG_FACTORY_FORMAT FAILED 0x02
