Mình nhận được cây máy asha 308 tình trạng cắm sạc vào máy bao ngay không sạc được. Mình thay thử r47k thì cắm sạc được nhưng dòng sạc chỉ 60mA cho dù pin chỉ còn 1 vạch. Tiếp tục thay thêm r15 tự nhiên máy không lên nguồn nữa nhưng máy vẫn còn dao động. Mình chạy phần mềm lại thì máy lại lên nguồn nhưng lại báo không sạc được. Log chạy phần mềm báo lỗi thế này Number of Image Files: 3 Processing Image File : rm838__05.85.mcusw CMT Type : XG223 CMT Algorithm : XG223_V0 ALG Secondary Sending Speed : 650000Hz Algorithm Sending Speed : 6500000Hz Program Sending Speed : 6500000Hz Message Reading Speed : 98000Hz Number of Blocks : 94 Entry Point: 0x037D Page Format : -1 MAX PAGE : 0x00080000 Processing Image File : rm838__05.85.ppm_v CMT Type : XG223 CMT Algorithm : XG223_V0 ALG Secondary Sending Speed : 650000Hz Algorithm Sending Speed : 6500000Hz Program Sending Speed : 6500000Hz Message Reading Speed : 98000Hz Number of Blocks : 15 Entry Point: 0x0368 Page Format : -1 MAX PAGE : 0x00080000 Processing Image File : rm838__05.85.image_v_059N7X7 CMT Type : XG223 CMT Algorithm : XG223_V0 ALG Secondary Sending Speed : 650000Hz Algorithm Sending Speed : 6500000Hz Program Sending Speed : 6500000Hz Message Reading Speed : 98000Hz Number of Blocks : 83 Entry Point: 0x00B5 Page Format : -1 MAX PAGE : 0x00080000 AUTO SELECTED DEAD USB FLASHING... If Phone Booting does not Start in 5 Seconds, Then Perform Steps 1, 2, 3 and 4... 1. Remove USB and Battery... 2. Insert USB. 3. Insert Battery. (Some phones boot automatically) 4. Please Power on phone shortly... AdvanceFBox SendBootCodeEx InitialiseBootstrap_DCT5 DIR BootFlashMode_DCT5 READING BOOTROM BootFlashModeDCT5Ex Succeeded First Time SYSTEM_ID_RESPONSE_BB5 (0xC0) - 82 (0x52) bytes returned Number of Sub Blocks 5 (0x05) 1 SYSTEM_ASIC_ID 01 Block Length : 21 (15) BB ASIC Index : 0 (00) CMT ID DWORD 0 : 00000C20 ID DWORD 1 : 16100040 ID DWORD 2 : A99260AA ID DWORD 3 : 895858FA ID DWORD 4 : B08AD600 2 PUBLIC_ID 12 Block Length : 21 (15) BB ASIC Index : 0 (00) CMT ID DWORD 0 : E44245EF ID DWORD 1 : 87B731A6 ID DWORD 2 : A99260AA ID DWORD 3 : 895858FA ID DWORD 4 : B08AD600 3 ASIC_MODE_ID 13 Block Length : 2 (02) BB ASIC Index : 0 (00) CMT Mode Id : 00 4 ROOT_KEY_HASH 14 Block Length : 17 (11) BB ASIC Index : 0 (00) CMT Hash : 12 5F C7 26 05 B5 C4 E4 8A 9E 02 25 08 4D 25 79 5 ROM_ID 15 Block Length : 9 (09) BB ASIC Index : 0 (00) CMT CRC 0 : 53588225 CRC 1 : 2F54C676 CMT Secondary Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\XG223_v11_usb2nd.fg Secondary Loader Sent.... CMT Algorithm Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\XG223_v11_usbalg.fg Algorithm Loader Sent.... FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready) FUR control Ok START READING RPL DATA NPC is Corrupted... ERROR: NPC is Corrupted..., 3 RPL Backup is Skipped PA PUBLIC KEY Request PhoneInfoRequest_BB5 (Asic Index 00 ) PHONE_INFO_RESPONSE_BB5 PAPUB_KEYS_HASH_RESP_BB5 2A BB Asic Index : 00 CMT PAPUBKEYS HASH: FAF910DA218D8536CEFBDCE369A8C034160C6A5F Reading : ISA-USER... OK! ====================================================== PHONE FIRMWARE VERSION: V 05.85 23-10-12 RM-838 (c) Nokia ====================================================== ImagePath: D:\DIEN THOAI\NOKIA\RM-838\ ImageFilename: rm838__05.85.mcusw Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01) Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only) Certificate 1 Name : NPC ASIC Index : CMT 0 Certificate 2 Name : CCC ASIC Index : CMT 0 Certificate 3 Name : HWC ASIC Index : CMT 0 Certificate 4 Name : R&D ASIC Index : CMT 0 STORE_CERTIFICATE_REQUEST_BB5 : 61 04 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 D3 STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00) StartErase_DCT5... BlockLength : 0x2E (46) ERASE Blocks : 0x01 (1) 0 ERASE_AREA_BB5 0x12 Block Length : 0x2B (43) BB ASIC Index : 0x00 CMT Device Type : 0x00 NOR Device Index : 0x00 0 : 40000000-4003FFFF 1 : 47E00000-47E3FFFF 2 : 400A0000-4251FFFF 3 : 42520000-4261FFFF 4 : 47E40000-47F1FFFF ERASE_REQUEST_BB5 : 5005120B000000400000004003FFFF120B00000047E0000047E3FFFF120B000000400A00004251FFFF120B000000425200004261FFFF120B00000047E4000047F1FFFF28 Successfully Erased... Total blocks to write : 94 >> CMT Rootkey Hash CERT : ISSW >> CMT Rootkey Hash CERT : MEMSET >> CMT Rootkey Hash CERT : PRIMAPP >> CMT Rootkey Hash CERT : LOADER >> CMT Rootkey Hash CERT : PASUBTOC >> CMT Rootkey Hash CERT : PAPUBKEYS [FAF910DA218D8536CEFBDCE369A8C034160C6A5F] >> CMT Rootkey Hash CERT : UPDAPP >> CMT Rootkey Hash CERT : MCUSW ImagePath: D:\DIEN THOAI\NOKIA\RM-838\ ImageFilename: rm838__05.85.ppm_v StartErase_DCT5... BlockLength : 0x0E (14) ERASE Blocks : 0x01 (1) 0 ERASE_AREA_BB5 0x12 Block Length : 0x0B (11) BB ASIC Index : 0x00 CMT Device Type : 0x00 NOR Device Index : 0x00 0 : 42620000-42FFFFFF ERASE_REQUEST_BB5 : 5001120B0000004262000042FFFFFFFE Successfully Erased... Total blocks to write : 15 ImagePath: D:\DIEN THOAI\NOKIA\RM-838\ ImageFilename: rm838__05.85.image_v_059N7X7 StartErase_DCT5... BlockLength : 0x0E (14) ERASE Blocks : 0x01 (1) 0 ERASE_AREA_BB5 0x12 Block Length : 0x0B (11) BB ASIC Index : 0x00 CMT Device Type : 0x00 NOR Device Index : 0x00 0 : 43000000-47DFFFFF ERASE_REQUEST_BB5 : 5001120B0000004300000047DFFFFF7A Successfully Erased... Total blocks to write : 83 ContinueFlash_DCT5 Complete Continue Flash Complete : : No Error - 0 (0x00) FlashInfo.RestartMode : Test Mode Flashing Done... Total Flashing Time (Erase + Flashing) : 00:00:46 (Booting time is NOT Included) Waiting for Phone to Start-Up..(Max 150 seconds) SW: V 05.85 23-10-12 RM-838 (c) Nokia IMEI: 12345610654321? SIMLOCK_TEST : PASSED SECURITY_TEST : PASSED SUPER_DONGLE_TEST : FAILED > REPAIR USING FBUS CABLE > Try "Customized SX4 with SD Repair" > Then Write PM 1 and 309 SECURITY_CODE : 12345 ================================================ SL3 Phone detected ================================================ * Firmware Version Downgrade will KILL PHONE !!! * Manual Full Erase WILL KILL PHONE!!! * Simlocks are in PM 120 Only... * PM 308 is Write Protected... Các anh xem giúp . Log này em chay bằng cáp USB . Anh nào có pin out cùa máy này cho em xin nhé hy vọng chạy bằng FBUS ok.
SW: V 05.85 23-10-12 RM-838 (c) Nokia IMEI: 12345610654321? SIMLOCK_TEST : PASSED SECURITY_TEST : PASSED SUPER_DONGLE_TEST : FAILED > REPAIR USING FBUS CABLE > Try "Customized SX4 with SD Repair" > Then Write PM 1 and 309 SECURITY_CODE : 12345 bank tòi loi hết rồi còn đâu! trước khi chạy có tick vào bachup RPL và simlock k? tình trạng như của thớt thì khả năng quay đầu là bờ
