Thông tin để ae dù chỉ có V1_Cùi cũng múc OK Lưu ý là dòng HDM này không thể Hardreset (It has no wiping option in recovery), và các thể loại vv... Mây ... mây đều bắt trả phí Luôn tiện, có BK... Gần... full bằng UFI và Z3 => Anh nào cần cứu nếu lỡ hẹo => cứ alo Mã:Running:Format FRP Partition... Z3X EasyJtag Software ver. 3.7.0.20 Loading eMMC GEN1 Firmware... IO: 3300 mV Box S/N: 09FF700D5AAACE38, ,FW Ver.: 01.63 CMD Pullup Level:2041 mV CMD Active Level:2887 mV Box IO Level:3300 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is off! ---------- eMMC Device Information ---------- eMMC CID : 15010044503644414203EA2B90FCA762 eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C eMMC Manufacturer ID: 0015 , OEM ID: 0100 eMMC Date: 10/2020 Rev.0x3 eMMC NAME: DP6DAB , S/N: 3928723708 eMMC NAME (HEX): 445036444142 EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB EMMC RPMB is programmed and written 14671 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- The protective MBR's 0xEE partition is oversized! Auto-repairing. Found valid GPT with protective MBR; using GPT. Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB Disk identifier (GUID): 21CD6BD5-6948-D703-B075-15B5002C2803 Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122142686 Partition info successfully found Formatting FRP... Detected LINUX(Android) FRP : 0x0047A22000 (512.0KB) formatting... Done. Detected LINUX(Android) USERDATA : 0x02B0000000 (47.491GB) , formatting... Done. Done. Done. Running:Reset PIN/PASS/GESTURE Locks Z3X EasyJtag Software ver. 3.7.0.20 Loading eMMC GEN1 Firmware... IO: 3300 mV Box S/N: 09FF700D5AAACE38, ,FW Ver.: 01.63 CMD Pullup Level:2041 mV CMD Active Level:2897 mV Box IO Level:3300 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is off! ---------- eMMC Device Information ---------- eMMC CID : 15010044503644414203EA2B90FCA762 eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C eMMC Manufacturer ID: 0015 , OEM ID: 0100 eMMC Date: 10/2020 Rev.0x3 eMMC NAME: DP6DAB , S/N: 3928723708 eMMC NAME (HEX): 445036444142 EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB EMMC RPMB is programmed and written 14671 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- The protective MBR's 0xEE partition is oversized! Auto-repairing. Found valid GPT with protective MBR; using GPT. Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB Disk identifier (GUID): 21CD6BD5-6948-D703-B075-15B5002C2803 Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122142686 Partition info successfully found ------ Android information ------ Detected LINUX(Android) USERDATA : 0x02B0000000 (47.491GB) Mount EXT4 fs... Unable to mount USER , code : 95 --------------------------------------------- Done.
Giải pháp mang tính phá hoại và khiến chẳng ai muốn chia sẻ điều gì! Ở tỉnh, ở huyện xa => Mang đi đc ko, và khách có chịu ko?
EasyJTAG v1 mới gặp nhai ok luôn nè Partition info successfully found Formatting FRP... Detected LINUX(Android) FRP : 0x0047A22000 (512.0KB) formatting... Done. Detected LINUX(Android) USERDATA : 0x02B0000000 (105.733GB) , formatting... Done. Done. Done. Running:Reset PIN/PASS/GESTURE Locks Z3X EasyJtag Software ver. 3.7.0.20 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 16FFF013DE7D301B, ,FW Ver.: 01.63 CMD Pullup Level:2031 mV CMD Active Level:2650 mV Box IO Level:2800 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is off!
