Unlock - Mở Khóa HTC - OPPO - Meizu - Moto - Huawei Online (thanhnamPDAviet)

Huawei Honor 6X BLN-AL10 Xóa Huawei ID By Chimera
Huawei Honor 6X BLN-AL10 Khóa Huawei Account
Huawei Honor 6X BLN-AL10 Xóa Huawei ID By Chimera
Nhận Mở Khóa FRP Huawei Honor 6X BLN-AL10 Online
Nhận Unlock - Mở Mạng Huawei Honor 6X BLN-AL10 Online
Nhận Mở Khóa Huawei ID Huawei Honor 6X BLN-AL10 Online

Mã:

@thanhnamPDAviet 5-6-2017
[Resetting device to factory state...]
Searching for Manufacture port...
Authenticating...
This may take a while.
Be patient! Do NOT disconnect the phone!
Removing Huawei-ID Protection from the device...
Resetting device to factory state...
Finished successfully.
Finished at local time: [06.05.17 17:49:15]
WorkID: XXXXXXXX

Unlock - Get Code - Repair IMEI - Online (Teamviewer)
Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)
Tags:BLN-AL10 Unlock,BLN-AL10 FRP,BLN-AL10 Huawei ID,

 

Meizu M3s Xóa Mã Bảo Vệ By Teamviewer
Meizu M3s bị khóa mã bảo vệ,không thể Hanset Factory,Xóa mã bảo vệ bằng MRT thành công

Mã:

  @thanhnamPDAviet
  Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM9
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>TSuccess
	Mobile phone status:SYNC...
on data...
Success
>>> Down	Mobile phone status swtich to :brom...Success
Success
le Phone...	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Fla Q823MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
sh   Size:	 Get Mobile Port is:  COM42
>>> Device driver identification:
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EA800000	Size(HEX):0x02B85FBE00
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
0x00000002A3E00000 -> 10814M
	Flash	 ID: 0x150100513832334D
	Flash   Name: Samsung_Unknow
	Flash symbol:

 

Huawei Mate 7 MT7-TL10 Xóa Huawei ID By Chimera
Huawei Mate 7 MT7-TL10 Xóa Huawei Account By Chimera
Huawei Mate 7 MT7-TL10 Xóa Huawei ID Qua Teamvierwer
Tags:MT7-TL10 Huawei ID,MT7-TL10 FRP,MT7-TL10 Unlock,

Mã:

@thanhnamPDAviet
 
[Resetting device to factory state...]
 
Searching for Manufacture port...
 
Authenticating...
This may take a while.
Be patient! Do NOT disconnect the phone!
 
Removing Huawei-ID Protection from the device...
 
Resetting device to factory state...
 
Finished successfully.
Finished at local time: [06.03.17 21:52:47]

☯ Unlock - Get Code - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)

 

Huawei GR5 Mini Dual NMO-L31 Xóa Xác Minh Tài Khoản Gmail By MRT
Huawei GR5 Mini Dual NMO-L31 Xóa FRP By MRT

Mã:

@thanhnamPDAviet
 
>>>>search android fastboot devices...
>>>>Get android fastboot devices...
	Mobile Name: HUAWEI NMO-L31
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Dynamic unlock code:e424ae4d4c4be1db	Connecting To Service...
	Bootloader Temporary  Unlock Done
	tip:Bootloader Temporary after reboot will lock again
>>>>Clear Frp Block
	...
	FAILED (status read failed (No such file or directory))
	finished. total time: 0.053s
>>>>Rebooting Mobile Phone
	rebooting...
	
	finished. total time: 0.025s

 

Huawei MediaPad T1-701u Unlock By Sigma
Huawei MediaPad T1-701u Phiên Bản Khóa Sim,Rooted,Unlock Sim Thành Công

Mã:

@thanhnamPDAviet
--------- 2017-06-09 10:31:16 ---------
SigmaKey 2.25.01 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ Android Composite ADB Interface
Version: Linux version 3.4.0+ (jslave@screen105) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Nov 19 04:04:51 CST 2014
Phone model: HUAWEI MediaPad T1 8.0
Android 4.3; Firmware: HuaweiMediaPad; Date: Wed Nov 19 09:30:52 CST 2014
Version: S8-701uV100R001C310B002
Baseband Firmware: 203050
Baseband Processor: Qualcomm MSM 8x1x (Flattened Device Tree)
Version: S8-701uV100R001C310B002
IMEI: 864505025174833
Security area saved to "C:\Users\thanhnamPDAviet\Documents\SigmaKey\security backup\864505025174833_HUAWEI_MediaPad T1 8_0_HuaweiMediaPad_Wed Nov 19 093052 CST 2014.skb"
Unlocking phone...Done
Restarting phone...Done

 

OPPO A37 Phá Mã Bảo Vệ By Teamviewer

 

Meizu M2 Khóa Mã Bảo Vệ - Mở Mã Bảo Vệ By MRT
Meizu M2 Note Khóa Mã Bảo Vệ - Mở Mã Bảo Vệ By MRT

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM3
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Success
>>> Downloading Boot1 To Mobile Phone...Success
	The Flash Hardware Info:Q823MB
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hard	Get Mobile Port is:  COM60
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM60
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00A6000000	Size(HEX):0x02FCD80000	
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
ware Parameter...Success
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000003A3E00000 -> 14910M
	Flash	 ID: 0x150100513832334D
	Flash   Name: Samsung_Unknow
	Flash symbol: Q823MB
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
Service verification data...

 

HTC One M8 Sprint Unlock By GCPro

Mã:

@thanhnamPDAviet
 
Device Detected...
model:= HTC One_M8
Androids Version:= 4.4.2
Description Version:= 1.54.651.8 CL326598 release-keys
Platform:= msm8974 [ qcom ]  [ 1.05.20.0321_2 ] 
Baseband:= 1.05.20.0321_2
Device := htc_m8whl
MODEID := 0P6B70000
CID := SPCS_001
PROJECT := M8_WHL_K44_SENSE60_SPCS_SECURITY
Network Mode := 1
Simstatus:= ICC_FAIL
IMEI-1 = 0000A3CA97
ANDROID-ID = FA43BSF02627_0000A3CA97
Detected su binary at /xbin
SU Version..2.82:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...
 
HTC SPRINT UNLOCKING STARTED...
Checking Data...
Waiting for Loader...
Loader Ok...
Direct Unlock Success...
MSL/SPC IS := 904328
 
!!! Success !!!!
 
Restarted phone...
Total Time Take...00:00:35
Log Saved

 

Nhận Xóa Huawei ID Huawei Honor 5C NEM-TL00H Qua Teamviewer
Nhận Xóa FRP Huawei Honor 5C NEM-TL00H Qua Teamviewer
Nhận Unlock Huawei Honor 5C NEM-TL00H Qua Teamviewer
Huawei Honor 5C NEM-TL00H Xóa Huawei ID By Chimera

Giá : 150K (Khách Lẻ + 100K)

Tags:NEM-TL00H Unlock,NEM-TL00H Mở Mạng,NEM-TL00H Bypass,NEM-TL00H FRP,NEM-TL00H Huawei ID,

Mã:

@thanhnamPDAviet
 
[Resetting device to factory state...]
 
Searching for Manufacture port...
 
Authenticating...
This may take a while.
Be patient! Do NOT disconnect the phone!
 
Removing Huawei-ID Protection from the device...
 
Resetting device to factory state...
 
Finished successfully.
Finished at local time: [06.10.17 16:26:42]
WorkID: 22246XXX

☯ Unlock - Get Code - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)

 

Meizu M2 Khóa Flyme Account - Mở Khóa By MRT

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM37
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	The Flash Hardware Info:Q823MB
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter...Success
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000003A3E00000 -> 14910M
	Flash	 ID: 0x150100513832334D
	Flash   Name: Samsung_Unknow
	Flash symbol: Q823MB
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM36
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM36
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00A6000000	Size(HEX):0x02FCD80000	
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

 

Meizu MX6 Khóa Mã Bảo Vệ,Không Thể Hanset Factory
Meizu MX6 Mở Khóa bảo Vệ By MRT

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM4
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6797
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA01
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
	Make sure Mobile status has in :brom...Success
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000747C00000 -> 29820M
	Flash	 ID: 0x150100424A4E4234
	Flash   Name: Samsung_Unknow
	Flash symbol: BJNB4R
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM5
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EB800000	Size(HEX):0x065B3F8000
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

 

Meizu M3s Quên Mã Bảo vệ,Không Thể Hanset Factory
Meizu M3s Mở Mã Bảo Vệ Bằng MRT Thành Công

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM8
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000002A3E00000 -> 10814M
	Flash	 ID: 0x150100513832334D
	Flash   Name: Samsung_Unknow
	Flash symbol: Q823MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM9
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EA800000	Size(HEX):0x02B85FBE00
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
 

 

Meizu M2 Quên Mã Bảo Vệ,Không Thể Hanset factory
Meizu M2 Mở Mã Bảo Vệ By MRT

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM22
>>> Device driver identification: 
	MediaTek PreLoader USB VCOM (Android)
>>> Mobile Has Connect...
	CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Success
	The Flash Hardware Info:JHBG4e
>>> Downloading Boot2 To Mobile Phone...Success
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000748000000 -> 29824M
	Flash	 ID: 0x90014A4842473465
	Flash   Name: Hynix_Unknow	Get Mobile Port is:  COM25
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM25
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM25
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00A6000000	Size(HEX):0x06A0F80000	
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
 
	Flash symbol: JHBG4e
	??ÔÚ?´Èë¿é?£Ñé   secro.... ³É¹¦!!!
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...

 

Huawei GR5 Mini NMO-L31 Khóa Xác Minh Tài Khoản Gmail
Huawei GR5 Mini NMO-L31 Mở Khóa FRP By MRT

Mã:

@thanhnamPDAviet
 
>>>>search android fastboot devices...
>>>>Get android fastboot devices...
	Mobile Name: HUAWEI NMO-L31
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Read Mobile Dynamic unlock code Fail
	Trying Second Way for Get the Unlock code
	Dynamic unlock code:0053799c83790bac	Connecting To Service...
	Bootloader Temporary  Unlock Done
	tip:Bootloader Temporary after reboot will lock again
>>>>Clear Frp Block
	...
	FAILED (unknown status code)
	finished. total time: 0.375s
>>>>Rebooting Mobile Phone
	rebooting...
	
	finished. total time: 0.000s

 

Huawei GR5 Mini Dual NMO-L31 Khóa Xác Minh Tài Khoản Gmail
Huawei GR5 Mini Dual NMO-L31 Xóa FRP By MRT
Huawei GR5 Mini Dual NMO-L31 Xóa Xác Minh Tài Khoản Gmail By MRT

Mã:

@thanhnamPDAviet
 
>>>>search android fastboot devices...
>>>>Get android fastboot devices...
	Mobile Name: HUAWEI NMO-L31
	Mobile Set BL Lock state:FB LockState: LOCKED
	Trying First Way for Get the Unlock code
	Dynamic unlock code:2131004b26347a37	Connecting To Service...
	Bootloader Temporary  Unlock Done
	tip:Bootloader Temporary after reboot will lock again
>>>>Clear Frp Block
	...
	(bootloader) The device will reboot and do factory reset...
	OKAY [  0.032s]
	finished. total time: 0.032s
>>>>Rebooting Mobile Phone
	rebooting...
	
	finished. total time: 0.000s

☯ Unlock - Get Code - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)

 

Mobell Nova R1 MT6580 Xóa FRP By MRT
Mobell Nova R1 MT6580 Khóa Xác Minh Tài Khoản Gmail
Tags:Nova R1 FRP,Nova R1 Xác Minh Gmail,Nova R1 Rom,

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM35
>>> Device driver identification: 
	MediaTek PreLoader USB VCOM (Android)
>>> Mobile Has Connect...
	CPU_NAME: MT6580
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Success
	The Flash Hardware Info:JHAG2e
>>> Downloading Boot2 To Mobile Phone...Success
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000003AB800000 -> 15032M
	Flash	 ID: 0x90014A4841473265
	Flash   Name: Hynix_Unknow
	Flash symbol: JHAG2e
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM36
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM36
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x0004FA0000	Size(HEX):0x0000100000	
	Corresponding operation completed!!!

☯ Unlock - Get Code - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)

 

ZTE Unlock By Code

Mã:

868185020031118 828862239868

SAMSUNG S8 Plus AT&T G955U Unlock By Code

Mã:

357756080901XXX
NETWORK=40964XXXDEFREEZE=85725XXX

HTC Unlock By Code

Mã:

355797049126313 43168550

Pantech Unlock By Code

Mã:

013779001026107 Code : 90943037

Motorola V8 Unlock By Code

Mã:

358777011086791
99001753 65485114

Alcatel 4034a Unlock By Code

Mã:

 014527001688361
NCK: 8290789386109750 NSCK: 0928558266009142 SPCK: 1567306252598951 CPCK/SIM: 4561909562722935 CCK: 8153608272590817 PCK: 2421721402703870

 

Nhận Phá Mã Bảo Vệ OPPO F3 F3 Plus Online

 

Nhận Cài Rom Quôc Tế OPPO R9m R9tm R9km

OPPO R9m Cover X9009 Repair IMEI By SIgma

Mã:

SigmaKey v.2.25.01
New version  2.25.06 is available on www.sigmakey.com. We strongly recommend to update SigmaKey!
990899819 Sigma dongle 2.25, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Not activated
--------- 2017-06-21 10:36:30 ---------
SigmaKey 2.25.01 ADB: Repair IMEI
* daemon not running. starting it now *
* daemon started successfully *
^ Android Composite ADB Interface
Version: Linux version 3.10.72 (root@WX-122-132) (gcc version 4.9 20140514 (mtk-20150408) (GCC) ) #1 SMP PREEMPT Sun May 29 09:46:35 CST 2016
Phone model: OPPO X9009
Android 5.1; Firmware: LMY47I; Date: Sun May 29 09:44:19 CST 2016
Version: X9009EX_11_A.17_160529
Baseband Firmware: MOLY.LR11.W1539.MD.MP.V9.P62, 2016/05/04 20:02
Baseband Processor: MT6755
Software IMEI: Not found
Security area saved to "C:\Users\thanhnamPDAviet\Documents\SigmaKey\security backup\OPPO_X9009_LMY47I_Sun May 29 094419 CST 2016.skb"
Repaired IMEI1: 352898070188801
Repaired IMEI2: 352898070188918
Done
Restarting phone...Done

 

HTC Unlock By Code

Mã:

358927045951276 56304377

 

✓ Samsung Unlock - Samsung FRP Remove - Samsung ID Remove - Samsung Repair IMEI & DRK - Độ 2 Sim
✓ Huawei Unlock - Huawei FRP Remove - Huawei ID Remove - Huawei IMEI Repair
✓ LG Unlock - LG FRP Remove - LG Unbrick
✓ Nokia Lumia unlock - Nokia MTK Unlock - Nokia SL3 Unlock
✓ Sony Unlock (0 counter support)
✓ Moto Unlock - Moto FRP
✓ Alcatel Unlock
✓ ZTE Unlock
✓ Vivo Account - Vivo Unlock Bootloader
✓ OPPO Unlock - OPPO IMEI Repair - OPPO Tiếng Việt
✓ HTC Unlock - FRP
✓ APPLE Unlock - APPLE ID Remove
✓ Blackberry Unlock - Blackberry ID Remove

☯ Nhận Unlock - Mở mạng - Get Code - Repair IMEI - Qua Teamviewer
☎ Hotline : 0966.833.711 0868.66.3070 (Zalo + Facebook)

 

Huawei Elite (LYO-L02) Khóa Sim Nhà Mạng
Huawei Elite (LYO-L02) Unlock By Chimera

Mã:

@thanhnamPDAviet
 
Initializing...
Phone version:
BB chip version: mt6735,S01
DSP fw version: Thu Dec 1 17:40:27 CST 2016
DSP patch version: n/a
Eco version: n/a
Hardware version: LYO-L02C718B123
Melody version: S01
Software version: n/a
 
Clearing network lock...
done.
 
Turning off the phone...
done.
 
Finished successfully.
Finished at local time: [06.23.17 13:44:04]

☯ Unlock - Get Code - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)

 

Meizu M3 Note Khóa Mã Bảo Vệ Không Thể Hanset Factory
Meizu M3 Note Mở Mã Bảo Vệ By MRT Qua Teamviewer

Mã:

	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM6
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status swtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x0000000747C00000 -> 29820M
	Flash	 ID: 0x90014A4842473461
	Flash   Name: Hynix_Unknow
	Flash symbol: HBG4a2
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM7
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EB000000	Size(HEX):0x065BBFBE00
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

 

Meizu M2 Khóa Mã Bảo Vệ Không Thể Hanset Factory
Meizu M2 Phá Mã Bảo Vệ By MRT

Mã:

	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM37
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	The Flash Hardware Info:Q823MB
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter...Success
	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000003A3E00000 -> 14910M
	Flash	 ID: 0x150100513832334D
	Flash   Name: Samsung_Unknow
	Flash symbol: Q823MB
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM36
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM36
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00A6000000	Size(HEX):0x02FCD80000	
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

 

HTC M8 831C KHóa Sim Mạng Sprint Mỹ
HTC M8 Sprint 831C Unlock By GC Pro

Mã:

Using Version...1.0.0.0047
Selected Model HTC M8WLS
Selected Task HTC Sprint Unlock(ADB)
 
Searching ADB device Please wait..
 
preparing Android first time use fix...
 
Device Detected...
model:= 831C
Androids Version:= 5.0.2
Description Version:= 4.25.651.14 CL501086 release-keys
Platform:= msm8974 [ qcom ]  [ 1.09.20.0209 ] 
Baseband:= 1.09.20.0209
Device := htc_m8whl
MODEID := 0P6B70000
CID := SPCS_001
PROJECT := M8_WHL_L50_SENSE60_SPCS_MR
Simstatus:= READY
ANDROID-ID = HT43MSF04282_0000173F0C
Device is not rooted
 
HTC SPRINT UNLOCKING STARTED...
Checking Data...
Waiting for Loader...
Loader Ok...
Direct Unlock Success...
MSL/SPC IS := 782452
 
!!! Success !!!!
 
Restarted phone...
Total Time Take...00:01:16
Log Saved

 

VIVO Y37A Y37L Khóa Bootloader
VIVO Y37A Y37L Unlock Bootloader By BST

Mã:

[IMEI Repair]
> Backup phone original QCN before Repair IMEI.
1. Connect phone to pc via USB cables.
2. Dail(*#558#) select ""Quality verification test", Enable "Debugging port"
3. Repair IMEI
 
[Bootloader Unlock]
1. Enter fastboot mode (install drivers if needed)
2. Press "Bootloader Unlock"
 
[Bootloader Relock]
1. Enter fastboot mode (install drivers if needed)
2. Press "Bootloader Relock"
 
[Account Lock]
1. Enter Fastboot mode (install drivers if needed)
2. Press "Reset Account Lock"
Tips:
1).If phone stuck after unlock, please Unlock bootloader and reflash firmware (or USERDATA parition only) to fix problem
 
Bootloader Unlocking ... ok

 

Vivo X7 Khóa Xác Minh Tài Khoản Vivo
Vivo X7 Xóa Vivo Account By BST
Tiện cài Tiếng Việt Luôn Cho khách

Mã:

@thanhnamPDAviet
 
[Bootloader Unlock]
1. Enter fastboot mode (install drivers if needed)
2. Press "Bootloader Unlock"
 
[Bootloader Relock]
1. Enter fastboot mode (install drivers if needed)
2. Press "Bootloader Relock"
 
[Account Lock]
1. Enter Fastboot mode (install drivers if needed)
2. Press "Reset Account Lock"
Tips:
1).If phone stuck after unlock, please Unlock bootloader and reflash firmware (or USERDATA parition only) to fix problem
 
Bootloader Unlocking ... ok
Wait device ready ... 
Unlock ... ok
Bootloader Locking ... ok
Bootloader Unlocking ... ok

 

Nhận Unlock Tất Cả OPPO Khóa Sim Nhà Mạng
Nhận Unlock Tất Cả OPPO Qualcomm
Nhận Unlock Tất Cả OPPO MTK

 

Meizu M2 Note Khóa Mã Bảo Vệ Không Thể Hanset Factory
Meizu M2 Note Xóa Mã Bảo Vệ By MRT

Mã:

	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM21
>>> Device driver identification: 
	MediaTek PreLoader USB VCOM (Android)
>>> Mobile Has Connect...
	CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CA00
>>> Initialization Mobile ..Success
>>> DownloadSuccess
ing Boot1 To MobSuccess
	The Flash Hardware Info:R821MB
>>> Downloading	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000003A3E00000 -> 14910M
	Flash	 ID: 0x150100523832314D
	Flash   Name: Samsung_KMR820001M_B609
	Flash symbol: R821MB
 To Mobile Phone.	??ÔÚ?´Èë¿é	Get Mobile Port is:  COM22
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM22
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM22
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00A6000000	Size	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
(HEX):0x02FCD80000	
 Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
...

 

Meizu M3s Khóa Mã Bảo Vệ,Không Thể Hanset Factory
Meizu M3s Phá Mã Bảo Vệ Qua Teamviewer By MRT
Khách ở xa,nên phải xóa Online qua Teamviewer

Mã:

	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM18
>>> Mobile Has Connect...
	CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
	Mobile phone status:SYNC...
	Mobile phone status s	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000002A3E00000 -> 10814M
	Flash	 ID: 0x150100514531334D
	Flash   Name: Samsung_Unknow
	Flash symbol: QE13MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM19
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
	ADD(HEX):0x00EA800000	Size(HEX):0x02B85FBE00
	Corresponding operation completed!!!
	After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
wtich to :brom...Success
Success
	Make sure Mobile status has in :brom...
	Init Mobile BOOT2 ...

 

OPPO A57 Xóa Mã Bảo Vệ By MRT
OPPO A57 Cover Full Tiếng Việt - Google
LENOVO a7101a48 IMEI Null
LENOVO a7101a48 Repair IMEI By Sigma Box
☯ Unlock - Get Code - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)

Mã:

>>>Try connect to mobile...Success
	CPU_SN:  0xB2155F95
	MSM_ID:  0x0006B0E1
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>Switch mobile to RE\WR ...Success
	Flasy type:  eMMC
>>>>ÕýÔÚ¶ÁÈ¡ÊÖ»ú·ÖÇøÊý¾Ý...Success
	Clear Moblile Lock data...
	After Click Mobile userdata will be lost...
	Format add: ADD:0x00E0C82000   Size:0x0666F79E00
	Erase Userdata.. Success
	Erase Userdata Block 2...
	Erase Userdata.. Success
	Erase Userdata Block 3...
	Erase Userdata.. Success
	Erase Userdata Block 4...
	Erase Userdata.. Success
>>>all is done
	********************************
	Please disconnect mobile set,and hold vol up and power key
	Mobile will be into recovery
	Click Restart
	********************************
	if mobile hand on logo or auto restart...
	You can in recovery erase data
	After ease data in recovery mobile will working normal

 

Mã:

SigmaKey v.2.25.01
New version  2.26.00b1 is available on www.sigmakey.com. We strongly recommend to update SigmaKey!
990899819 Sigma dongle 2.25, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Not activated
--------- 2017-07-10 13:33:34 ---------
SigmaKey 2.25.01 ADB: Repair IMEI
* daemon not running. starting it now *
* daemon started successfully *
^ Android Composite ADB Interface
Version: Linux version 3.10.65+ (buildslave@njbs13) (gcc version 4.9.x-google 20140827 (mtk-20150409) (GCC) ) #1 SMP PREEMPT Wed Jan 13 21:32:30 CST 2016
Phone model: LENOVO Lenovo A7010a48
Android 5.1; Firmware: LMY47D; Date: Wed Jan 13 21:25:24 CST 2016
Version: A7010a48_S147_160113_ROW
Baseband Firmware: K5.ROW.LWG.V56, 2016/01/13 21:10
Baseband Processor: MT6753
Software IMEI: Not found
Security area saved to "C:\Users\thanhnamPDAviet\Documents\SigmaKey\security backup\LENOVO_Lenovo A7010a48_LMY47D_Wed Jan 13 212524 CST 2016.skb"
Repaired IMEI1: 888888888888885
Repaired IMEI2: 999999999999994
Done
Restarting phone...Done

 

OPPO F3 Lite (A57) Unlock Sim By Teamviewer
OPPO R9s (CPH-1607) Unlock Sim By Teamviewer

Giá : 0966833711
Tags:A57 Unlock,A57 Mở Mạng,R9s Unlock,R9s Mở Mạng,CPH-1607 Unlock,CPH-1607 Mở Mạng,A57 Tiếng Việt,

 

Thêm 1 Cặp OPPO F3 Lite (A57) & R9s (CPH-1607) Unlock Network

 

OPPO A57 Thị Trường China Không Có Tiếng Việt Google
OPPO A57 Up Rom Quôc tế F3 lite CPH1701 Full Tiếng Việt

 

✓ Samsung Unlock - Samsung FRP Remove - Samsung ID Remove - Samsung Repair IMEI & DRK - Độ 2 Sim
✓ Huawei Unlock - Huawei FRP Remove - Huawei ID Remove - Huawei IMEI Repair
✓ LG Unlock - LG FRP Remove - LG Unbrick
✓ Nokia Lumia unlock - Nokia MTK Unlock - Nokia SL3 Unlock
✓ Sony Unlock (0 counter support)
✓ Moto Unlock - Moto FRP
✓ Alcatel Unlock
✓ ZTE Unlock
✓ Vivo Account - Vivo Unlock Bootloader
✓ OPPO Unlock - OPPO IMEI Repair - OPPO Tiếng Việt
✓ HTC Unlock - FRP
✓ APPLE Unlock - APPLE ID Remove
✓ Blackberry Unlock - Blackberry ID Remove
☯ Unlock - Get Code - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711(Zalo + Facebook + Whatsapp + Viber)

 

Nhận Phá Mã Bảo Vệ OPPO R9s (CPH1607)
Nhận Unlock Network OPPO R9s (CPH1607)
Nhận Mở Mạng OPPO R9s (CPH1607)
Nhận Nạp Tiếng Việt OPPO R9s (CPH1607)
OPPO R9s (CPH1607) Phá Mã Bảo Vệ By MRT
OPPO R9s Khóa Mã Bảo Vệ Không Thể Hanset Factory

Giá : 0966833711 (Zalo + Facebook)
Tags:R9s (CPH1607) Unlock,R9s (CPH1607) Mở Mạng,R9s (CPH1607) Tiếng Việt,R9s (CPH1607) Mã Bảo Vệ,

Mã:

@thanhnamPDAviet
 
>>>Try connect to mobile...Success
	CPU_SN:  0x59DDB42C
	MSM_ID:  0x000460E1
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>Switch mobile to RE\WR ...Success
	Flasy type:  eMMC
>>>>ÕýÔÚ¶ÁÈ¡ÊÖ»ú·ÖÇøÊý¾Ý...Success
	Clear Moblile Lock data...
	After Click Mobile userdata will be lost...
	Format add: ADD:0x00E0C82000   Size:0x0DAEB79E00
	Erase Userdata.. Success
	Erase Userdata Block 2...
	Erase Userdata.. Success
	Erase Userdata Block 3...
	Erase Userdata.. Success
	Erase Userdata Block 4...
	Erase Userdata.. Success
>>>all is done
	********************************
	Please disconnect mobile set,and hold vol up and power key
	Mobile will be into recovery
	Click Restart
	********************************
	if mobile hand on logo or auto restart...
	You can in recovery erase data
	After ease data in recovery mobile will working normal

 

Thêm 1 bạn OPPO F3 Lite A57 CPH1701 Unlock Network Done

Hỗ trợ Unlock Online Qua Teamviewer

 

htc m8 prink có unlock qua team được ko a

 

Không bác ạ,Sprint HTC qua team khó lắm.