các bác làm qua chỉ giáo em với ạ . *#0808# chọn mtp+ adb thì nhận máy tính nhưng không unlock đc .cứ báo không tìm ra phone ..driver đã đủ . theo hướng dẫn của z3x thì chọn DM + modem+ adb . chọn vậy thì lại chỉ nhận sạc không nhận máy tính nữa . đổi qua octopus không không si nhê .. bác nào gặp qua chỉ em với :cry::cry::cry:
read info thì ok còn unlock nó cứ báo không tim ra phone ạ UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Type *#9090# and choose 'DM/DUN over HSIC'. 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-N910W8 Selected port: COM5 Z3X USB Serial Port, Software version: 20.5 Reading phone info... no answer from phone Done with Samsung Tool v.20.5
info máy đây ạ BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Press 'Read EFS' button to read backup or 'Write EFS' to restore or press 'Write CERT' to restore certificates. To backup/restore QCN, phone diagnostic port must be enabled. 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Type *#9090# and select 'DM/DUN over HSIC'. 4. Connect phone to PC with USB cable, install drivers if needed. 5. Choose diagnostic port in port settings. 6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore. Operation: Read EFS Selected model: SM-N910W8 Selected port: COM5 Z3X USB Serial Port, Software version: 20.5 Waiting ADB device... OK Reading phone info... Model: SM-N910W8 Android version: 5.0.1 Product code: SM-N910WZWERWC Phone version: N910W8VLU1BOE2 PDA version: N910W8VLU1BOE2 CSC version: N910W8OYA1BOE2 CSC country code: Canada CSC sales code: RWC HW version: REV1.1 Phone S/N: Modem board: MDM9225M RF cal date: 2014.12.07 IMEI: Checking Super user right... true Reading EFS from phone... OK Saved to C:\Program Files\Z3X\Samsung\SamsungTool\backup\EFS\EFS_SM-N910W8_N910W8VLU1BOE2___23-10-2015_8-10-30.tar Done with Samsung Tool v.20.5
giờ cứ khởi độn nó tự boot vào recovery xong chớp tắt con roboot . khách dặn backup danh bạ mà quên chưa back up huhu
chơi rom gốc lại cho chắc rồi unlock,mấy con unlock cứ hard reset xong rồi mới làm,ko thì nó cứ cà tưng sao ý
Welcome to Octoplus/Octopus Box Samsung software version 1.9.7 ----------------------------------------------------------------------------------- To connect SM-N910W8 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info, please wait... Proper android device not found. Make shure that "USB debug" option on the device is turned on. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info, please wait... Please, press "OK" button on the phone to allow USB debugging.. Detected phone model: SM-N910W8 Firmware compiled date: Tue Aug 4 18:50:40 KST 2015 PDA version: N910W8VLU1BOE2 CSC version: N910W8OYA1BOE2 SW version: N910W8VLU1BOE2 Phone IMEI: Unknown Phone SN: 00000000000 Android version: 5.0.1 (LRX22C) ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM14 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM14 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Phone was not found on the selected port! Searching for USB diagnostic port... No diagnostic ports found! Connecting to phone on COM14 Phone connection failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-N910W8 Reading info... Phone was not found on the selected port! Phone unlocking failed
lấy cáp usb ra sau đó bấm *#0808# chọn DM+MODEM+ADB cắm vào máy tính cho nó nhận ra drive.Sau đó vào phần chọn cổng trên z3x chọn cái cổng usb nó mới nhận đó.Nhấn unlock là lụm lúa
vấn đề là e chọn mtp+ adb thì nó nhận máy tính nhưng chọn dm+modem+adb nó lại k nhận máy tính nữa chỉ sạc thôi
chon usb debugging chưa,nếu chọn rồi thì thử tắt nó đi,còn chưa chọn thì bấm vào,có thể đổi cổng usb khác xem sao.Nên chọn cổng sau
đã bật usb debug đổi cổng cũng k ăn thua . nghỉ ăn cơm đã đói hoa mắt 1h chiến tiếp anh em có chiêu gì cứ comment nhé thanks
Vào recovery chọn enable CP - *#0808# chọn DM+ADB .... Cắm usb cho nhận driver đủ cổng ===> Z3X chọn port Unlock
Máy này không khóa CP Có z3x Pro root máy unlock adb không cần bấm 0808 5.0 tíck new security lượm lúa
pass đó là cái tên....đc đính kèm, viết đè thêm lên mỗi tấm hình họa đó. FanVF ai cũng biết mà thớt quên á Vietfones.vn Em chưa biết chỗ mod nói nên cũng vào tìm hiểu, học hỏi tý
em chạy rom gốc mất root phang file cf root lại mất recovery gốc ..trích recovery từ rom gốc ra đóng tar phang vào ok bật enable cp những vẫn k xi nhê gì cả
