Như tiêu đề em cần file gdfs gt505 chạy bằng octupus không hiểu sao em vào sp của nó nhưng toàn bị báo lỗi nên ko dow file được. E nhận cây máy bị đơ cảm ứng mọi lần chạy lại ok lần này chạy lại đến đoạn Writing GDFS thì bị báo error giờ máy lên chớp tắt ae có up hộ lên em với ạ khách đang ngồi dí quá . thanks ae nhiều Đây là log của nó ạ Welcome to Octopus Box LG Software version 2.5.1 -------------------------------------------------------------------------------- Platform: LG SEMC Selected port: COM4 Selected baudrate: 921600 Selected model: GT505 Use Testpoint/Jumper: No -------------------------------------------------------------------------------- For correct working the battery must be fully charged! Please, reconnect battery, press and hold volume-up button and connect USB cable. If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). Starting... Phone found! Chip ID: 0xD9000401FFFFFFFF Chipset: DB3200 BootROM mode detected Sending ACC preloader...OK Sending APP preloader...OK CID: 54 IMEI: 354695-03-707600-6 Color: Red Sending APP flash loader...OK Opening "GT505AT-00-V10g-ESA-XXX-MAR-29-2010+0.oct"...OK Writing "CXC_LGPXO_SYS_CABS_LP_NAND_commercial.ssw"...OK Writing "CXC_FS_CABS_LP_NAND_commercial.ssw"...OK Writing "cxc000000_APPLICATION_PHONE_SB_IAR-ARM- NAND.ssw"...OK APP GDFS blocks count: 18 ACC GDFS blocks count: 23 Writing APP GDFS... Error of writing GDFS block number 1 Disconnected.
Máy đã ok AE nếu có chạy đến đoạn đó báo lỗi thì chỉ cần click vào Repair và kết nối lại điện thoại chạy xong là ok Welcome to Octopus Box LG Software version 2.5.1 -------------------------------------------------------------------------------- Platform: LG SEMC Selected port: COM4 Selected baudrate: 921600 Selected model: GT505 Use Testpoint/Jumper: No -------------------------------------------------------------------------------- For correct working the battery must be fully charged! Please, reconnect battery, press and hold volume-up button and connect USB cable. If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). Starting... Phone found! Chip ID: 0xD9000401FFFFFFFF Chipset: DB3200 BootROM mode detected Sending ACC preloader...OK Sending APP preloader...OK CID: 54 IMEI: 354695-03-707600-6 Color: Red Sending APP flash loader...OK Opening "GT505AT-00-V10g-ESA-XXX-MAR-29-2010+0.oct"...OK Writing "CXC_LGPXO_SYS_CABS_LP_NAND_commercial.ssw"...OK Writing "CXC_FS_CABS_LP_NAND_commercial.ssw"...OK Writing "cxc000000_APPLICATION_PHONE_SB_IAR-ARM- NAND.ssw"...OK APP GDFS blocks count: 18 ACC GDFS blocks count: 23 Writing APP GDFS... Error of writing GDFS block number 1 Disconnected. -------------------------------------------------------------------------------- Platform: LG SEMC Selected port: COM4 Selected baudrate: 921600 Selected model: GT505 Use Testpoint/Jumper: No -------------------------------------------------------------------------------- For correct working the battery must be fully charged! Please, reconnect battery, press and hold volume-up button and connect USB cable. If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). Starting... Phone found! Chip ID: 0xD9000401FFFFFFFF Chipset: DB3200 BootROM mode detected Sending ACC preloader...OK Sending APP preloader...OK CID: 54 IMEI: 354695-03-707600-6 Color: Red Sending APP flash loader...OK Repairing Security...OK Repairing Certificates...OK Sending ACC production loader...OK Sending APP production loader...OK Unlocking...OK Phone successfully unlocked! To finish the operation, please re-flash phone with any firmware from the support area! Disconnected.
