máy khách đem vào contact service e chay lai bằng ATF thấy báo lỗi SIMLOCK_TEST : FAILED nho

Processing Image File :
rm934_14.0.4.mcusw.fls
Processing Image File :
rm934_14.0.4_059S9W3_s2.rofs.fls
Processing Image File :
rm934_14.0.4_059S9W3_s2.image.fls


AUTO SELECTED DEAD USB FLASHING...

If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, and 3...

1. Remove USB Cable and Battery...
2. Connect USB Cable.
3. Connect Battery.

***** IF PHONE STARTS CHARGING OR DOES NOT BOOT *****
******* REMOVE BATTERY AND PUT IT BACK AGAIN. *******
======================================================


Infineon Boot: F016194200021C030101CAB21A0982A2F826504F8100FFFF
CPU Type: Intel XG221

Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Flash Chip Manufacturer: STMicroelectronics
Flash Boot Successful...
Unique Data: CAB21A0982A2F826
Original Product Code: 059S9W3
Reading : CCC... OK!
Reading : HWC... OK!
Reading : NPC... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Turbo Flasher\Nokia\Backup\351747061193521\351747061193521_93613.rpl

Current File : rm934_14.0.4.mcusw.fls
Number of Images: 2
rm934_14.0.4.mcusw.fls.fls
rm934_14.0.4.mcusw.fls.fls
Processing Data Block 0x00
Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x01
Erase Block: 0x40040000~0x4005FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0x40060000~0x401BFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0x40340000~0x423B659A
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0x47E00000~0x47E3FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...


Current File : rm934_14.0.4_059S9W3_s2.rofs.fls
Number of Images: 1
rofs_ebl_psi.fls
Processing Data Block 0x00
Erase Block: 0x42880000~0x4352B67A
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...


Current File : rm934_14.0.4_059S9W3_s2.image.fls
Number of Images: 1
rm934_14.0.4_059S9W3_s2.image.fls.image.fls
Processing Data Block 0x00
Erase Block: 0x43800000~0x45A5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0x47E40000~0x47F1FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...

Total Flashing Time (Erase + Flashing) : 00:02:14
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)



Scanning USB Ports...

================================================
Basic Phone Information
================================================
MCU Version: V 14.0.4 07-03-14 RM-934 (c) Nokia
IMEI Plain : 351747061193521
IMEI Spare : A351747061193520
IMEI SV : 33517470611935205F
IMEI (2nd) : 351747061193539
IMEI Spare : A351747061193530
IMEI SV : 33517470611935305F
Phone Model: 6 500
Category : Classic Phone
Phone Type : RM-934

================================================
Extended Phone Information
================================================
Product Serial Number: 46D6945BH
Product Code : 059S9W3
Module Code : 0205546
Basic Production Code: 059R4P6
Long Production SN : 0
PPM SW Version : 0097c0dfe87291e101b761d33334f45375aeee78
BT MCM Version : 0101-0.1.A
AEM Version : 4336b2-5.92.36.4
MCU SW Version : V 14.0.4 07-03-14 RM-934 (c) Nokia
HW Version : 1100
UPP Version : MFR:0xff,DEV:0xff1a,REV:0x11
RFIC Version : Integrated to main ASIC
LCD Version : TPO
AHNE Version : 12
Variant Version : 0000000000000000000000000000000000000000
TAHVO Version : RM-934-14.0.4-059S9W3-14.0.4-14.0.4
Wireless LAN ID : DC:C7:93:16:E6:B6
Bluetooth ID : DC:C7:93:139:76
CS Type : GSM900, GSM1800

********** SIMLOCK INFO **********
CONFIG_DATA : 0000000000000000
PROFILE_BITS : 0000000000040000
ASIC : 11
PROVIDER : Unknown Provider
LOCK COUNTERS: KEYPRESS 0/3, FBUS 0/10

Unable to read SP Data..

SIMLOCK_TYPE : PA_SIMLOC30 (20-digit NCK)
SIMLOCK_TEST : FAILED
SECURITY_TEST : PASSED
SECURITY_CODE : P
PHONE_MODE : TEST

================================================
Dynamic Camera Configuration
================================================
DCC ID : 115B6002
DCC Ver: 006008
Status : OK


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK


RESET LIFE TIMER TO : 0000:00
OK

 

Lỗi cặp thôi pác .

 

còn cách thay cặp thoi hả a