Ẩn / Hiện Quảng Cáo

INFINITY CHINESE MIRACLE-2 update new here

Thảo luận trong 'THIẾT BỊ HỖ TRỢ SỬA CHỮA.' bắt đầu bởi namnhatrang, 18/11/16.

  1. 24/5/18 lúc 12:26

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,515
    Được thích:
    139
    Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r3 - More secured devices and features !

    - Main
    DownloadAgent version 1816 supported and tested on all supported SoC.
    Fixed some memory leaks
    Connection level revised

    - MemoryTool
    Fixed multi-selection
    GPT init revised
    Preloader init revised

    - Service
    Repair Security revised. Fixed issues with some Meizu and other models.

    - Core
    Optimized different agents versions support ( DA16xx line )
    EMIDB updated
    Hint/Error explain module updated
    Activated SymLinks - allow reduce boot base size by redirecting diffirent brand/models if they have same base
    BootHelper ( stage 1 of 3 ) activated - hints/explanation of boot sequnce and correct file selection
    MT6758 support under test
    MT6771 support under test
    MT6765 support under test

    - Flasher
    Show Preloader HW compatibility when load firmware in flash tab
    Fixed file selection order - if SW package contain mixed types - secure will be selected by default

    - FW reader
    New types of firmwares supported
    Scatter creation optimized for some SoC

    - New models included
    Limited Alcatel support
    Limited Gionee support
    Limited Wiko support
    Limited Tecno support
    And diffirent other models
    Some other basic "generic" secure devices support optimized
    NAND devices on MT6570 moved to separate mode ( under base ) - FACTORY for ONLY FACTORY-provided FW flashing, INFINITY - for all rest operations

    Known issues/warnings/info :
    1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
    In result you will give read/write FW errors and rest problems at all.
    Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
    2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
    3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
    Read-Write data, which you want, ignore "EMPTY" states.
    4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
    5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
    6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
    7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
    8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
    If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
    Preloader info shown now during FW load.

    Credits :
    gracy_elec - different useful files contribution
    kamal_singla - testing and useful files contribution
    merujeffrey - useful files contribution and report logs


    Download link #1 - Download link #2 - Download link #3
     
  2. 6/6/18 lúc 20:12

    toilatoi142001

    Super Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,439
    Được thích:
    683
    nfinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features

    Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features !

    Important:
    - Software installed to new folder /CM2MT2/ and designed to support new models
    - Smart-Card firmware v0136 is Ok to use this version
    - DO NOT uninstall previous version 1.58 ! If you are trying to connect phone with new software and see a message like LEGACY MTK you should use version 1.58 for this device !

    - Main
    Connection level revised
    BROM level support optimized

    MT6771 CPU supported!
    MT6771 moved from TEST to GENERAL support.
    Firmwware read
    Firmware write
    NVRAM read
    NVRAM write
    Reset Settings / Format FS
    Reset FRP
    Reset Privacy
    MemoryTool

    - Service
    Repair Security revised. Fixed issues with some NV types.

    - Core
    EMIDB updated
    Hint/Error explain module updated
    MT6758 support under test
    MT6765 support under test

    - FW reader
    MT6771 supported
    New types of firmwares supported
    Scatter creation optimized

    - SP Unlock
    Revised unlock support for some models
    Info: MT6739/MT6763/MT6771 IS NOT supported YET!

    - New models included
    Limited Oppo support (F7/A3)
    Limited Vivo support
    And diffirent other models
    Some other basic "generic" secure devices support optimized

    Known issues/warnings/info:
    1. [NAND on MT6570] v1712, v1736 loader packages SHOULD NOT BE USED due to these packages have ftl/ecc errors!
    In result you will give read/write FW errors and rest problems at all.
    Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
    2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
    3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal behaviour and can not be fixed.
    Read-Write data, which you want, ignore "EMPTY" states.
    4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
    5. FileSystem flashing on some SBC-enabled devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
    6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases !
    7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
    8. [NAND on MT6570] In some cases device MAY BE DEAD after flashing! Make sure you have TESTED firmware version!
    If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE !
    Preloader info shown now during FW load.

    Credits :
    kamal_singla - testing and useful files contribution





    Discussion and download links - https://www.infinity-box.com/support/?r=100016
     
  3. 12/6/18 lúc 15:20

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,515
    Được thích:
    139
    Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features

    Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features



    Supported CPU list:
    Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
    RDA Mirco: RDA8851 rev A,B,C,L,CL
    RDA Micro: RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
    Flashing protocol updated
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6533/G:
    Protocol updated
    Support for REV2 bootrom mode activated
    FW reading revised
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6530/6531/A/C/E:
    Revised Repair security feature
    Flashing revised
    -> Activated "Format FFS" during BINARY dump writing
    -> Use that feature, if device not allow make direct format ( some C/E revision devices )
    User code read revised - activated 2nd mode : from DUMP
    -> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
    Activated AUTO fixer for memory dumps
    Internal loaders updated

    Spreadtrum other:
    Protocol updated
    PAC handling revised
    Improved Flashing procedure for SC7701/SC7702 devices
    Improved Flashing procedure for SC6825/SC8825 devices

    Known issues[*]/warnings[!]/info:
    1. AUTO fixer for memory dumps
    -> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
    -> Just select binary dump in flashing tab or any other operation, which require file select.
    2. [*] In some cases Format FFS may fail on E and C rev
    -> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.






    Download link
     
  4. 1/7/18 lúc 10:12

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,515
    Được thích:
    139
    Infinity `SM` software v2.00 released

    Infinity `SM` software v2.00 released


    Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
    `SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
    Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.

    Infinity `SM` software v2.00 news:
    - many internal stability improvements
    - FRP unlock engine re-written
    - FRP unlock procedure updated
    - security area write for MTK based devices
    - security area write for Exynos based devices
    - Smart-Card firmware should be updated to use this software release
    - "SM ResourcePack" should be installed to get all released functions working

    At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.


    Download link
     
  5. 12/7/18 lúc 20:16

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,515
    Được thích:
    139
  6. 6/9/18 lúc 09:52

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,515
    Được thích:
    139
    Infinity `SM` software v2.02 released

    Infinity `SM` software v2.02 released


    Service changes:
    - Downgrade modem procedure released. This operation may be dangerus so use at own risk and only if you are really know you need it !
    - rebuild Reset FRP procedure
    Internal changse:
    - a lot of changes related to use server functions
    - bug fixes and internal improvements





    Download link
     
  7. 11/10/18 lúc 23:20

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,515
    Được thích:
    139
    Infinity `SM` software v2.00 released

    Infinity `SM` software v2.00 released


    Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
    `SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
    Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.

    Infinity `SM` software v2.00 news:
    - many internal stability improvements
    - FRP unlock engine re-written
    - FRP unlock procedure updated
    - security area write for MTK based devices
    - security area write for Exynos based devices
    - Smart-Card firmware should be updated to use this software release
    - "SM ResourcePack" should be installed to get all released functions working

    At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.

    Latest released version: 2.03
    Curent price: 70 Infinity credits


    List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc.
    Test reports are here - Success test reports with Infinity SM software


    Download link
     
  8. 9/11/18 lúc 00:34

    toilatoi142001

    Super Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,439
    Được thích:
    683
    Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features

    Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features


    Important:
    - Software installed to new folder /CM2MT2/ and designed to support new models

    Legacy core support activated:
    MT6571
    MT6572
    MT6580
    MT6582
    MT6589
    MT6592
    MT6595
    MT6597
    MT6732
    MT6735
    MT6737
    MT6752
    MT6753
    MT6795
    MT8127
    MT8163
    MT8321
    MT8732
    MT8735
    MT8752

    Identify: full device info, security info
    Flash Factory Firmware
    Read Factory Firmware
    Reset Settings / Format FS
    Reset FRP
    Repair Security (Flash Mode, Direct)
    SP unlock
    MemoryTool - complete device control, service, repair, forensic etc.

    - Main
    Loader database optimized, size reduced.
    DA v1820 line support tested and activated
    DA v1836 line support tested and activated
    Connection level revised
    BROM level support optimized
    Optimized and changed HighSpeed port selection
    FlashEngine revised
    NVRAM tool revised
    Global option PWM - allow switch SW between two different work modes for RAPHAEL.
    > Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc.
    > For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE )

    - Service
    Repair Security revised
    > Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes !
    Format FS - new mode activated: Forced Erase
    Format FS - fixed WIPE mode

    - Core
    EMIDB updated
    New EMI engine for LEGACY line
    > EMI engine support almost all existing LEGACY line
    > New types for RAPHAEL included

    - FW reader
    LEGACY core supported ( unsigned and static signed types are supported )
    New types of firmwares supported
    Scatter creation optimized

    - Other
    Settings tab activated ( firmware path settings and other features can be found here )
    AutoUpdate ( module files ) feature activated

    Many other changes and fixes

    Known issues/warnings/info:
    1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
    2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list !
    3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed.
    4. MT6592 support on DAv18xx loader line broken ( DA issue )
    5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP )
    6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC )
    7. NAND support on LEGACY line is not activated yet




    Discussion and download links are here
     
  9. 15/11/18 lúc 10:06

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    1,515
    Được thích:
    139
    Infinity Chinese Miracle-2 MTK/Mediatek v2.02 - new features, loaders, improvements

    Infinity Chinese Miracle-2 MTK/Mediatek v2.02 - new features, loaders, improvements


    - Base
    Base - Read info from EMI base (preloader) in manual mode after selection
    Base - Info reading improved ( in some cases device info can be empty )
    Base - Manual mode selection revised ( Boot fail issues in manual mode )

    - MemoryTool
    MemTool - Partition types detection improved
    MemTool - Interface changes ( partition selection style changed, menu sctructure changed )
    MemTool - work with boot1/boot2 section revised for LEGACY line
    MemTool - InitPreloader option activated ( LEGACY/RAPHAEL )
    MemTool - Flash service regions read/write now allowed ( if they not set as protected - i.e. OTP )

    - Flasher
    Flasher - Removed "Skip preloader" option, use selection instead ( untick preloader from flashing list )
    Flasher - Customization model revised
    Flasher - DL Fix / ADL Checksum revised
    Flasher - Preloader initialization during flashing revised
    Flasher - More accurate PMT/GPT rebuild, for compatibility with SPFT ( PMT invalid issues after servicing with MT2 module )

    - Firmware Reader
    FWReader - Scatter compatibility for spft optimized (6735, 6737)
    FWReader - More types supported for safe read
    FWReader - Info reading improved ( in some cases device info can be empty )
    FWReader - SW path settings also accepted now on FW read

    - Platform changes
    Platform - MT6589 support optimized
    Platform - MT6592 support optimized
    Platform - MT673x support optimized

    - Loader database
    LoaderDB - New agents included ( BQ, TECNO, INFINIX, VIVO )

    - Other
    Other - Lot of small fixes and changes, reported by users

    Thanks to : gracy_elec, kamal_singla and other our users for providing files and/or testing


    Download link
     

Chia sẻ trang này