Ẩn / Hiện Quảng Cáo

SMARTCLIP 2 update new here

Thảo luận trong 'THIẾT BỊ HỖ TRỢ SỬA CHỮA.' bắt đầu bởi namnhatrang, 18/11/16.

  1. 14/7/20 lúc 04:02

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip 2 v.1.37.00. World's first Direct Unlock for Kirin 710/970/980

    We present an innovative Direct Unlock solution for the newest Huawei smartphones on HiSilicon Kirin 710/970/980 processors.

    We also present an improved 'Remove Huawei ID' service feature.


    More info and discussion are HERE

    Best regards,
    GSMServer team
     
  2. 21/7/20 lúc 21:57

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.38.00

    This time we present unlock through a Software test point for a large number of Huawei phones.

    The Android patch level version no longer matters!


    Devices on HiSilicon Kirin 710 / Kirin 710F / Kirin 710A / Kirin 980 processors:

    1. SOFTWARE TESTPOINT
    2. Direct Unlock
    3. Remove Huawei ID
    4. Read OEM INFO
    5. REMOVE FRP
    6. Board (factory) flash files flashing
    7. Write original Update.app files
    8. ENABLE DOWNGRADE
    9. Write OEM INFO
    10. Load Fastboot / Backdoor open
    11. More features will be added, step-by-step.
    Both Pack 3 and Pack 4 have to be activated to use these exclusive features.
    Devices on HiSilicon Platform:

    • REMOVE FRP using SAFE MODE for Android 10 Huawei models (after downgrade)
    • Full flashing of Huawei 2019-2020 devices (in upgrade mode)
    • Support of smartphones with UFS flash memory type
    • Downgrade firmware operation for smartphones on Android 9 and Android 10 phones
    • Change firmware operation for smartphones on Android 9 and Android 10 phones
    • UPGRADE MODE flashing using FULL OTA UPDATE files (Upgrade and Downgrade)
    • Rescue mode entering (allows you to enter upgrade mode via fastboot mode)
    • Allows to service newest devices on Kirin710 / Kirin 810 / Kirin 820 / Kirin970 / Kirin980 / Kirin990
    • Write original Huawei board (factory) flash files in *.xml format
    List of Supported HiSilicon Huawei Devices
    Devices on MTK Platform:

    • Repair IMEI on the latest MTK based Huawei devices
    List of Supported MTK Huawei Phones
    • Y5 2019
    • Y6 Prime 2019
    • Y6 Pro 2019
    • Y6 2019
    • Honor Play 8A
    • Honor 8A Pro
    • Honor 8A
    • Enjoy 9e
    • Honor 8S
    • AMN-AL10, AMN-L03, AMN-L21, AMN-L22, AMN-L23, AMN-L29, AMN-LX1, AMN-LX3, AMN-LX9
    • JAT-L21, JAT-L29, JAT-L41, JAT-AL00, JAT-LX1
    • MRD-L03, MRD-L11, MRD-L21, MRD-L41, MRD-AL00, MRD-TL00, MRD-LX1, MRD-LX1F, MRD-LX3
    • KSA-AL00, KSA-AL10, KSA-L22, KSA-L23, KSA-L29, KSA-LX9
     
  3. 24/7/20 lúc 01:40

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip v.2.38.02. Vendor/country/Model Repair for Kirin 970/710/980 and others

    Smart-Clip v.1.38.02

    Exclusive Huawei Solutions

    Released exclusive Repair features for devices based on HiSilicon Kirin 65x / Kirin 95x
    / Kirin 960 / Kirin 970 / Kirin 710 / Kirin 980:


    • Change vendor
    • Change country
    • Change Model

    More info and discussion are HERE
    Best regards,
    GSMServer team
     
  4. 29/7/20 lúc 05:38

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip2 v.1.38.03. Full support for Kirin 810!

    Smart-Clip2 Software v1.38.03 released!

    They say. We do.
    The big update is already here!
    We have added support for Huawei devices based on freshly backed processor HiSilicon Kirin 810!
    35+ models added to the list.


    More info and discussion are HERE.

    Smart-Clip2-On!

    Best Regards
    GSMServer team
     
  5. 6/8/20 lúc 09:50

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.38.04
    [​IMG]
    HiSilicon Kirin 990 and Kirin 990 5G connected!

    1. Added support for Huawei devices based on latest
    HiSilicon Kirin 990 and HiSilicon Kirin 990 5G processors:
    :
    Supported features:
    • Direct network unlock
    • Remove Huawei ID
    • REMOVE FRP (if available on the device)
    • Read / Write OEM INFO
    • Get full device info
    • Load Fastboot / Backdoor open
    • Write original Huawei board (factory) flash files in *.xml format
    • Flash in Upgrade or Fastboot mode
    • Enable Downgrade / Change firmware
    • Repair and Change Vendor / Country / Mode
    • Software testpoint ON/OFF
    2. Supported Huawei devices based HiSilicon Kirin 990 / Kirin 990 5G:
    • Honor Play 4 Pro
    • Honor 30 Pro
    • Honor 30 Pro+
    • Mate Xs
    • Honor V30 Pro
    • Honor View 30
    • MatePad Pro
    • MatePad Pro 5G
    • MatePad 10.8 4g
    • Mate 30 RS
    • Mate 30 Pro 5G
    • Mate 30
    • Mate 30 Pro
    • MatePad Pro
    • Nova 6 5G
    • Nova 6
    • P40 Pro+ / P40 Pro / P40

    3. Significantly improved Software Testpoint feature:
    • This solution that was firstly presented to the market by our team,
    now supports more Huawei phones without disassembling

    • Devices with latest Android versions are supported,
    including Android 10.1 and higher

    • This feature is supported by all the existing firmwares. We do not recommend
    performing this procedure on devices that run on CPUs not currently supported.

    • Before performing any kind of operation,
    make sure that your device battery is at least 50% charged.​
    4. Flashing of Huawei devices via Fastboot mode was significantly improved.
    Both Pack 5 and Pack 6 have to be activated to use these exclusive features.


     
  6. 14/8/20 lúc 23:11

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.38.05
    [​IMG]
    RESTORE IMEI on the latest Huawei devices!
    Released new service features for the devices based on HiSilicon
    Kirin 710 / 65x / 95x / 810 / 960 / 970 / 980 / 990 / 990 5G:

    • Read secure data
    • Write secure data

    What does the secure data contain?
    • This area contains IMEI(s) and phone lock status
    What does it allow me to do?
    • Copy the IMEI of Phone1 and restore it to Phone2 (in case the phone1 is damaged)
    • Restore your phone's IMEI when replacing smartphone's motherboard
    • Replace an old active mobile with the new one, saving IMEI number
    • Backup and restore original IMEI(s) and network lock state
    Please read the manual carefully before performing the operation.
    Both Pack 5 and Pack 6 have to be activated to use these exclusive features.


     
  7. 27/8/20 lúc 22:11

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.38.06
    Huawei Software testpoint becomes more powerful!

    1. Improved "software testpoint...off" operation: now, even if you performed
    "software testpoint...ON" operation with some other service solution,
    Smart-Clip2 software allows you to bring your phone back from Factory COM 1.0
    mode into a normal mode.
    2. We have analyzed all of your feedbacks and implemented many fixes and
    improvements for the service operations.



     
  8. 10/9/20 lúc 23:46

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.39.00
    Share Huawei secure data (certificate) files!

    Following numerous wishes of our customers, we released new service features for
    Huawei devices on HiSilicon Kirin 710/65x/95x/810/960/970/980/990/990 5G:
    Enable secure data (certificate) sharing

    With this update you will be able to:
    • Share your Huawei certificate files
    • Use shared Huawei certificate files
    This option is presented as a package, so no additional credits are required for using the features.
    Enable this service feature using our new Smart-Clip2 Pack 7 activation!​

    Changes in Using Huawei Operations via server
    Starting from September 10, 2020,
    the conditions of using server solution for Huawei phones will be changed.

    We introduce a monthly amount of authorizations* for performing service operations with Huawei phones:
    3000** authorizations per month - for Pack 6 owners.
    300** authorizations per month – for those, who don’t own Pack 6.
    To increase the limit you need to have Pack 6 activated.
    What shall I do if I used my daily amount of authorizations?
    • reset the daily count using "Counter Reset Pack". To use this option you need to have Pack 7 activated
    • or wait until the daily count will be reset by the software
    Important info for owners of all Smart-Clip2 Packs(2-7)
    For the first time in the world!
    Solution for HiSilicon Kirin 710/65x/95x/810/960/970/980/990/990 5G
    (via Software/Hardware TP) allows to perform the following without any fees or limits:

    • no server connection required
    • no credits needed to perform all service operations
    • the amount of daily and monthly service operations is UNLIMITED
    *Authorization – backdoor opening of Huawei phone,
    after which you can perform one or several service operations (Unlock, IMEI repair, Remove FRP, etc.).
    Backdoor closes after the phone has been restarted.

    **Monthly quota limit is distributed PROPORTIONALLY by days.​

     
  9. 25/9/20 lúc 20:31

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip2 v1.39.01. HiSilicon Kirin 820 and Kirin 985 are connected!

    Smart-Clip2 Software v1.39.01 released!

    HiSilicon Kirin 820 and Kirin 985 are connected!
    Supported Huawei devices based HiSilicon Kirin 820 / Kirin 985:
    • Honor 30 / BMH-AN10
    • Honor X10 Pro / BMH-TN20, BMH-AN00
    • Nova 7 Pro / JER-AN10
    • Nova 7 / JEF-AN00
    • Honor V6 5G / KRJ-AN00
    • Nova 7 SE / CDY-NX9B, CDY-AN00
    • Honor 30S / CDY-NX9A
    • Honor X10 / TEL-AN00, TEL-TN00
    • Honor 30S / CDY-AN90
    • MatePad 5G / BAH3-AN10
    • P40 Lite 5G / CDY-NX9A
    • Honor X10 Pro

    More info and discussion are HERE.

    Smart-Clip2-On!

    Best Regards
    GSMServer team
     
  10. 29/9/20 lúc 22:05

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip2 v1.39.02

    Smart-Clip2 Software v1.39.02 released!

    We implemented adjustments and improvements for work with Kirin 990 and Kirin 990 5G based devices and more...

    More info and discussion are HERE.

    Smart-Clip2-On!

    Best Regards
    GSMServer team
     
  11. 16/10/20 lúc 21:32

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.39.03
    [​IMG]
    Released world's first READ FIRMWARE feature for Huawei devices based on
    HiSilicon Kirin 710 / 810 / 820 / 970 / 980 / 985 / 990 / 990 5G!
    This unique feature allows to:

    • Save the firmware from device with rare version/localization

    • Read firmware from one phone and write it to the other one

    • Users may share the firmware

    The phone's firmware will be saved in an opened .xml factory format.
    Manual: https://sigmakey.com/en/supportedfeatures/help?phone_id=2634"]READ firmware from the phone[/URL]
    Get full access to the latest Smart-Clip2 functionality with our new Pack 7 activation!​

     
  12. 21/10/20 lúc 22:21

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.39.04
    Flashing of Huawei devices via Fastboot mode operation was significantly improved.

    Please use the latest Smart-Clip2 Software version.

     
  13. 6/11/20 lúc 23:10

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip2 Software 1.39.04.01 (build 01) is out!

    Smart-Clip2 Software 1.39.04.01 (build 01) is out!

    Added support for Huawei devices based on the latest HiSilicon Kirin 980 5G CPU

    For more details refer to this link.

    Best Regards
    GSMServer team
     
  14. 24/11/20 lúc 18:21

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
  15. 15/12/20 lúc 22:36

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip2 v.1.39.05. BIG UPDATE FOR HUAWEI P40 series

    Smart-Clip2 Software v1.39.05 released!

    We are proud to present service solution for Huawei ID Remove for Huawei p40 series!

    More info and discussion are HERE.

    Smart-Clip2-On!

    Best Regards
    GSMServer team
     
  16. 18/12/20 lúc 22:08

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip2 Software v1.39.06 released!

    Smart-Clip2 Software v1.39.06 released!

    Starting from today even more Kirin 710 based new phone models are supported! In addition, added support of new flash file types!

    More info and discussion are HERE.

    Smart-Clip2-On!

    Best Regards
    GSMServer team
     
  17. 23/12/20 lúc 20:32

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.39.07

    1. Improved servicing of the devices based on HiSilicon Kirin 710
    (added Kirin 710A support)

    2. Released Huawei ID remove feature for Huawei ANA-LX4 (Kirin 990) beta.


     
  18. 15/1/21 lúc 22:35

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.39.08
    Added support for Huawei devices based on MTK CPUs:
    • HUAWEI Y5P
    • HUAWEI Y6P
    • DRA-LX9 / DUA-LX9N
    • MED-LX9 / MED-LX9N
    • MOA-LX9N

    Supported features:
    • Unlock, Get Unlock Codes
    • Repair IMEI
    • FRP Remove
    • Model/Vendor/Country repair
    • Read/Write OEM info
    Please read the SPFT Method manual carefully before performing the operation.
    Pack 5 has to be activated to use these features.​

     
  19. 28/1/21 lúc 22:11

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.00
    The following features have been released for latest Huawei MTK based devices:

    • Backup calibration data
    • Restore calibration data *

    These features will allow to fix “Software IMEI: Not found” / "IMEI: null" issues.
    Just Backup calibration data from a working set & restore it into the corrupted one.
    Then Repair phone’s original IMEI.

    Supported MTK models:​
    • AMN-AL10, AMN-L03, AMN-L21, AMN-L22, AMN-L23, AMN-L29, AMN-LX1,
    AMN-LX3, AMN-LX9
    • DRA-LX9, DUA-LX9N
    • Enjoy 9e
    • Honor 8A, Honor 8A Pro, Honor 8S, Honor 9A, Honor Play 3E, Honor Play 8A
    • JAT-AL00, JAT-L21, JAT-L29, JAT-L41, JAT-LX1
    • Kansas, KSA-AL00, KSA-AL10, KSA-L22, KSA-L23, KSA-L29, KSA-LX9,
    KSA-TL00, KSE-LX9
    • Madrid, MED-LX9, MED-LX9N, MOA-LX9N, MRD-AL00, MRD-L03, MRD-L11,
    MRD-L21, MRD-L41, MRD-LX1, MRD-LX1F, MRD-LX2, MRD-LX3, MRD-TL00
    • Y5 2019, Y5P, Y6 2019, Y6 Prime 2019, Y6 Pro 2019, Y6P
    • DRA-AL00, DRA-L01, DRA-L02, DRA-L03, DRA-L21, DRA-L22, DRA-L42,
    DRA-LX2, DRA-LX3, DRA-LX5
    • DUA-AL00, DUA-L21, DUA-L22, DUA-LX2, DUA-LX3, DUA-TL00
    • Enjoy 8e Youth, Honor 7s, Honor Play 7, Y5 2018, Y5 Prime 2018
    • and other new MTK models

    *Share Huawei calibration data using our new Smart-Clip 2 Pack 7 activation!​

     
  20. 2/2/21 lúc 23:11

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.01
    Released Huawei ID remove support for Huawei P40 / Mate 30 Pro series
    with the latest Android security patch levels:
    • Huawei P40
    / ANA-N29 / ANA-AN00 / ANA-L04 / ANA-L24 / ANA-LX4 / ANA-TN00
    • Huawei P40 Pro Plus / ELS-AN00 / ELS-AN10 / ELS-TN00 / ELS-N39
    • Huawei P40 Pro / ELS-NX9 / ELS-N04 / ELS-N29
    • Mate 30 Pro / LIO-AN00 / LIO-TN00 / LIO-AL00 / LIO-L09 / LIO-LX9
    Activate Pack 7 to keep hand on pulse of our latest developments!​

     
  21. 11/2/21 lúc 23:18

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.02
    Released Write Battery serial number feature for Huawei HiSilicon based devices.
    • When changing phone battery to the other one / not original one,
    some firmware versions may verify the serial number of new battery.
    If the SN is not compatible, the phone may not turn on.


    • In this case, for phone’s proper operation,
    it is necessary to write a new battery serial number to the phone.


    • Usually the battery contains its serial number with QR-code on it.


     
  22. 4/3/21 lúc 23:39

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.03
    MTK update
    Released Bypass boot authorization feature for MTK devices:
    • Allows to disable security and service devices with any security configuration

    • Allows to service of a big number of newest MTK devices

    • The solution is based on bootrom Security Bypass Exploits.
    The following SoC are supported:
    MT6572, MT6580, MT6582, MT6735, MT6737, MT6739, MT6755, MT6757,
    MT6761, MT6763, MT6765, MT6768, MT6771, MT6785, MT6799, MT6873,
    MT8127, MT8163, MT8173, MT8695

    How to do it:
    Just tick the "Authorize" box and service the phone with Smart-Clip2 in a usual way.
    Please read the full manual before performing the operation


     
  23. 16/3/21 lúc 16:37

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.04

    Released Repair "Chip is Damaged" feature on Kirin 990 / 990 5G devices.
    • Allows to solve "Your device won't work properly because the chip is damaged"
    issue on EMUI 11 after Remove Huawei ID

    How to do it:
    Please read the full manual attentively before performing operation



     
  24. 18/3/21 lúc 21:50

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
  25. 26/3/21 lúc 21:39

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.06
    MTK update
    Starting from this update, SOFTWARE TESTPOINT feature now supports
    MTK Huawei devices!
    What is the Software Testpoint?

    • This solution that was firstly presented to the market by our team,
    works as a hardware testpoint, but no need to disassemble the phone

    • Allows to set MTK device to factory mode

    • No need to search for the schematics of testpoints

    Supported MTK models:
    • HUAWEI Y5P (DRA-XXX)
    • HUAWEI Y6P (MED-XXX)
    • Honor 8A (JAT-XXX)
    • Honor 9A (MOA-XXX)
    • Honor 8S / Pro (KSA-XXX)
    • Y5 2019 (AMN-XXX)
    • Enjoy 9e, Y6 2019 (MRD-XXX)

    Please read the the manual carefully before performing the operation.
    Pack 5 + Pack 6 has to be activated to use this feature.​

     
  26. 29/4/21 lúc 22:11

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.07
    BIG MTK UPDATE: Huawei ID REMOVE
    We are proud to present the world's only solution that allows correct
    Huawei ID REMOVE for MTK devices!

    Supported Huawei / Honor devices and processors:

    MT6761 (Mediatek Helio A22)
    Y5 2019 / AMN-LX1 / AMN-LX2 / AMN-LX3 / AMN-LX9
    Y6 Prime 2019 / Y6 2019
    Honor 8S / KSA-LX9 / KSE-LX9
    Honor Play 8
    Y6 Pro 2019 / MRD-LX2 / MRD-L22
    Enjoy 9e / MRD-AL00​
    MT6765 (Mediatek Helio P35)
    Honor Play 9A / MOA-AL00, MOA-TL00, MED-AL20, MOA-AL20
    Enjoy 9E / MRD-AL00
    Enjoy 10e / Changxiang 10e
    Honor Play 8A
    Honor 8A / Honor 8A Pro
    Y6s / JAT-LX1 / JAT-LX3 / JAT-L41 / JAT-L29
    MatePad T8 / KOB2-L09
    Honor 9S / DUA-LX9
    Honor 9A / MOA-LX9N
    Y6p / Y5p / DRA-LX9 / MED-LX9N
    Honor Play 3e
    MT6768 (Mediatek Helio G80)
    Y9a / FRL-L22 / FRL-L23​
    MT6873 (Mediatek Dimensity 800)
    Honor X10 Max / KKG-AN00, KKG-AN10
    Honor 30 Lite / MXW-AN00
    Enjoy 20 Pro / DVC-AN20
    Honor 30 Youth / MXW-AN00
    Enjoy Z 5G / DVC-AN00
    Honor Play 4 / TNNH-AN00
    Maimang 9
    Honor X10 Max / KKG-AN00​

    Benefits of our solution:
    • Unlike other “incomplete” solutions, we offer full and correct Huawei ID unlock
    • "Huawei ID"-based phone services remain working after performing the operation
    (face ID / user lock / factory reset / cloud services and others)
    • "Huawei ID"-lock will not return after reflashing - the device is fully cleared
    • Big number of latest Huawei and Honor MTK devices supported
    • Full support for MTK Devices with eMMC and UFS flash chips
    Important: We strongly do not recommend using other Huawei ID removal solutions
    available on the market.
    The lock will be removed at a first, and it will be possible to use the phone.
    But the part of the phone’s functionality, that is tied to the Huawei ID account,
    will not be available.
    So, after the incorrect ID removal operation, you will get partially working phone.

    This functionality is available with our new Smart-Clip2 Pack 7 activation!

     
  27. 7/5/21 lúc 21:30

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.08
    MTK TAB
    We expanded the list of MTK processors supported for
    Bypass boot authorization feature.


    Added new group:

    • MT6753, MT6779, MT6795, MT6797, MT8167
    This feature allows you to disable security and service devices with any security configuration.
    Please read the manual before performing the operation.​

    HiSilicon TAB
    The following features were released for Huawei
    HiSilicon Kirin 710 / 810 / 820 / 970 / 980 / 985 / 990 / 990 5G based devices:

    • Backup calibration data
    • Restore calibration data

    This information includes network settings and other sensitive phone data.​

     
  28. 25/5/21 lúc 20:34

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.09
    MTK TAB
    SOFTWARE TESTPOINT feature
    (servicing without disassembling) for MTK Huawei devices has been improved.

    The list of supported devices has been extended.

     
  29. 5/8/21 lúc 20:42

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.10
    Exciting news coming up!
    Meet our freshly made update exclusively for Smart-Clip2 users!

    We are proud to present a bunch of new service features, released for
    Huawei / Honor smartphones with MediaTek Dimensity 800 MT6873 inside!



    Benefits:

    Direct Unlock, Get Unlock Codes
    IMEI Repair
    Huawei ID remove (was previously supported)
    Software testpoint ON/OFF (up to 10.1)
    READ / Write OEM info
    Backup and Restore Calibrations
    Change Vendor/Country/Model
    Fast performance of service operations via SPTF-method

    Supported devices:
    • Huawei Mate 40 Lite
    Huawei Enjoy 20s
    Honor 30 Lite 5G / MXW-AN00
    Honor X10 Max / KKG-AN00, KKG-AN10
    Honor 30 Youth / MXW-AN00
    Honor 30 Youth Edition
    Honor Play 4 TNNH-AN00
    Maimang 9 Changxiang 20s / TNN-AN00
    Enjoy 20 Pro Changxiang 20 Pro / DVC-AN20
    Enjoy Z 5G / DVC-AN00​

    Devices with UFS flash chips are fully supported!
    Please, read the manual before performing service operations.

     
  30. 18/8/21 lúc 00:47

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.40.11
    [​IMG]
    BIG MTK UPDATE:
    1. Added support for new Huawei smartphones with MediaTek MT6853

    Supported features:

    • Direct Unlock
    • IMEI Repair
    • Huawei ID remove
    • Software testpoint ON/OFF (up to 10.1)
    • READ / Write OEM info
    • Backup and Restore Calibrations
    • Change Vendor/Country/Model
    Huawei:
    Nova 8 SE JSC-AN00
    Enjoy 20 Plus FRL-AN00a
    Enjoy 20 Changxiang 20, WKG-TN00, WKG-AN00e
    Nova 7 SE CND-AN00
    2. Bypass boot authorization feature now supports
    MT6592, MT6595, MT6885, MT6833, MT6853, MT8590 CPUs.

    Please read the manual before performing the operation.
    3. Server performance was improved. Use latest Sigma software only for phone servicing!
    Innovative functionality is available with our new Smart-Clip2 Pack 7 activation!
     
  31. 14/9/21 lúc 21:50

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.41.00
    HiSilicon tab:
    1. Updated loaders for Kirin 820 and Kirin 985 based Huawei devices.
    2. Improved service operations on Huawei HiSilcon devices with new firmware types

    MTK tab:
    1. Improved servicing of unknown MTK Android devices.
    Now you get the maximum functionality with a minimum of files.
    Please read the relevant manual.
    2. Added Format FFS feature, that removes pattern lock / password code /
    other user data on MTK Android smartphones
    3. Implemented many adjustments and improvements for the service operations.

     
  32. 24/9/21 lúc 19:25

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.41.01

    BIG VIVO UPDATE!
    The following Vivo 2018-2021 MTK models added to the list of supported:

    • S1, S7e, S7t, S9e
    • V11, V11i, V15, V17 Neo, V21
    • X21i
    • IQOO U3X, IQOO U3, IQOO Z1
    • Y12, Y12s, Y15, Y17, Y19, Y1s
    • Y20 2021, Y20G, Y20G 2021, Y21
    • Y3, Y30, Y30G, Y31, Y3s, Y3s 2021
    • Y52s, Y53s, Y5s
    • Y69, Z3i
    • Y72 5G, Y73s, Y7s
    • Y81, Y81D, Y81i, Y81s, Y83, Y83 Pro, Y85
    • Y90, Y91, Y91c, Y91i, Y93, Y93S, Y95, Y97
    Read the manual before performing service operations

    More models and service features will be added, step-by-step.
    Use Smart-Clip2 to its fullest with Pack 7!​


     
  33. 29/9/21 lúc 21:45

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.41.02

    VIVO IMEI REPAIR!
    Released IMEI REPAIR feature for the following models:
    • Y1S, Y12, Y12s, Y15, Y17, Y19
    • Y20 2021, Y20G 2021, Y20G
    • Y3, Y30, Y30G, Y3s 2021
    • Y5s, Y52s
    • Y7s
    • Y81, Y81i , Y81s, Y81D, Y83, Y83 Pro, Y85
    • Y90, Y91, Y91c, Y91i, Y93, Y93s, Y95
    • V17 Neo, V21, Y73s
    • IQOO U3X
    • IQOO U3
    • S1, S7e, S7T, S9e
    Activate Pack 7 to use this feature!
     
  34. 7/10/21 lúc 09:23

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.41.03
    VIVO IMEI REPAIR!
    1. Released IMEI REPAIR feature for the following VIVO MTK models:
    • V11
    • V11i
    • V15
    • X21i
    • Y53s
    • Y72 5G
    • Y97
    • Y21 2021
    • Z3i
    • IQOO Z1

    2. Huawei MTK devices: service operations are noticeably improved.
    More models added to the list.

    Activate Pack 7 to use this feature!​


     
  35. 22/10/21 lúc 23:32

    toilatoi142001

    Moderator

    toilatoi142001
    Tham gia:
    1/8/10
    Bài viết:
    2,530
    Được thích:
    764
    Smart-Clip2 v1.41.04. MAJOR IMEI Repair improvements!

    Smart-Clip2 Software v1.41.04 released!

    With this release we have greatly improved Read/Write secure data features for the HiSilicon Kirin devices.

    More info and discussion are HERE.

    Smart-Clip2-On!

    Best Regards
    GSMServer team
     
  36. 5/11/21 lúc 22:10

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.41.05
    Here is our answer to the latest versions of Huawei security!
    1. Released Huawei ID remove / Repair "Chip is Damaged"* support for
    devices on Kirin 990 / Kirin 990 5G, that:

    • updated to the high Android firmware versions / latest security patch levels
    • updated to Harmony OS
    2. Updated Bootloaders for Kirin 990 / Kirin 990 5G devices:
    Kirin 990 / 990 5G (boot 1): recommended for devices connected
    via regular USB cable + software / hardware TP

    Kirin 990 / 990 5G (boot 2): recommended for devices connected
    via regular or modified USB cable + hardware TP + latest Android OS firmwares

    Kirin 990 5G (boot 3): recommended for devices connected
    via modified USB cable and hardware TP with latest HarmonyOS firmwares.
    This boot is in test mode.
    Supported Kirin 990 / 990 5G Huawei devices:
    • P40: ANA-AL00 / ANA-L04 / ANA-LX4 / ANA-AN00 / ANA-TN00 /
    ANA-N09 / ANA-NX9
    • P40 Pro+: ELS-AN10 / ELS-N39
    • P40 Pro" ELS-AN00 / ELS-NX9 / ELS-N29 / ELS-N09 / ELS-NX4 /
    ELS-N04 / ELS-AN00 / ELS-TN00
    • MatePad 10.8: SCMR-W09 / SCMR-AL09
    • MatePad Pro: MRX-AL19 / MRX-W09 / MRX-W19
    • MatePad Pro 5G: MRX-AL09
    • Nova 6: WLZ-AL10 / WLZ-TL10
    • Nova 6 5G: WLZ-AN00
    • Honor V30: OXF-AN00
    • Honor V30 Pro: OXF-AL10 / OXF-AL10I / OXF-AN10
    • Honor Play 4 Pro: OXP-AN00
    • Honor 30 Pro+: EBG-AN10
    • Honor 30 Pro: EBG-TN00 / EBG-AN00
    • Mate 30: TAS-N09 / TAS-L09 / TAS-LX9 / TAS-L29 / TAS-NX9 / TAS-AN00 / TAS-TL00
    • Mate Xs: TAH-N29m / TAH-AN00m
    • Mate 30 Pro:LIO-N09 / LIO-L09 / LIO-L29 / LIO-LX9 / LIO-TN00 /
    LIO-AN00 / LIO-AL00 / LIO-TL00 / LIO-N29
    Relevant manuals:

    • How to service devices with closed (disabled) hardware TP
    • "Huawei ID" Remove for devices based on Kirin 990 / Kirin 990 5G

    *Huawei ID remove and Repair "Chip is Damaged" features for 990/9905G devices
    with latest security versions require Smart-Clip2 Pack 7 activation


     
  37. 23/11/21 lúc 23:07

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.41.06
    With a great pleasure, we introduce our most recent and exclusive
    solutions for all Smart-Clip2 Pack 7 users!

    After careful analysis of numerous logs and feedbacks received recently,
    we have dedicated considerable efforts to the improvement of the HUAWEI ID feature
    for the most popular HiSilicon Kirin 990 smartphones.

    In this update, we:
    • Improved Huawei ID remove feature for devices updated to the high Android firmware versions /
    latest security patch levels / HarmonyOS
    • updated existing bootloaders
    • added alternative bootloader - Kirin 990 (boot 3)
    Supported Kirin 990 Huawei devices:
    • Huawei P40
    • Mate 30
    • MatePad 10.8
    • MatePad Pro / MatePad Pro 5G
    • Nova 6 / Nova 6 5G
    • Honor V30

    Instructions required for the service operations:

    • How to service devices with closed (disabled) hardware TP
    • "Huawei ID" Remove for devices based on Kirin 990 / Kirin 990 5G

     
  38. 1/12/21 lúc 21:12

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.41.07
    [​IMG]
    1. Released Remove Huawei ID / Repair "Chip is Damaged" features
    support for Kirin 820 / 985 devices:

    • updated to the high Android firmware versions
    • updated to Harmony OS
    2. Updated Bootloaders for Kirin 820 / Kirin 985 devices

    Supported Huawei and Honor devices:
    • P40 Lite 5G: CDY-NX9A
    • Honor 30: / BMH-AN10
    • Honor 30S: CDY-NX9A / CDY-AN90
    • Honor X10: TEL-AN00 / TEL-TN00
    • Honor X10 Pro: BMH-TN20 / BMH-AN00
    • Honor V6: KRJ-W09
    • Honor V6 5G: KRJ-AN00
    • MatePad 5G: BAH3-AN10
    • Nova 7 Pro: JER-AN10
    • Nova 7: JEF-AN00 / JEF-NX9
    • Nova 7 SE: CDY-NX9B / CDY-AN00
    • Nova 8: ANG-L02B / ANG-L22B / ANG-L21B / ANG-AN00
    • Nova 8 Pro: BRQ-AN00
    Instructions:

    • "Huawei ID" Remove for devices based on Kirin 820/985/990/9905G
    • Repair the "Chip Damaged" issue for Kirin 820/985/990/9905G devices

    To perform these operations on the most popular smartphones in your country,
    you need to have Smart-Clip2 Pack 7 activated!


     
  39. 15/12/21 lúc 21:33

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.42.00
    Global improvements were made to Sigma software for HiSilicon
    Kirin 820 / 985 / 990 / 990 5G devices that work via a resistor cable:

    • Increased speed of service operations
    • Work process is much more stable
    Update your Smart-Clip2 card to the latest firmware version.​

     
  40. 21/12/21 lúc 22:17

    namnhatrang

    Moderator

    namnhatrang
    Tham gia:
    13/2/07
    Bài viết:
    3,629
    Được thích:
    284
    Smart-Clip2 Software v.1.42.01
    Improved work with HiSilicon Kirin 980 devices:
    1. Released Remove Huawei ID / Repair "Chip is Damaged" features
    support for devices updated to the high firmware versions / Harmony OS
    2. Sufficiently improved Sigma software support for the devices
    that work via a resistor cable: higher speed of service operations and much stable work


     

Chia sẻ trang này