Xin file T999

Anh em có file full T999 cho em xin với.máy imei bb còn đầy đủ mà sóng hiện vòng tròn gạch chéo hic

 

bỏ vô z3x fix cái ok liền

 

chỉ có 1 file thôi chứ file full thì không có rồi

 

đây :https://usersfiles.com/oksay25z0exv/T999UVUEMJC_TMBEMJC_Repair_Firmware.zip

 

Rảnh qua team giúp em cái anh

 

thử coi a
https://mega.nz/#!EsJmCSgR!oJUOEvsfJc_-iAV6NFMM5mxZlwTqnCbb6nLcSakEukw

 

Vẩn không hết luôn hic.sao cái z3x cũa em dòng repai networ bị mờ anh em

 

Muốn có repair netvvork thì setup ver 18.5 trở xuống đi bác

 

Vẩn không có luôn.3 dòng bị mờ hết luôn

 

REPAIR INSTRUCTIONS:
Repair IMEI/Serial/BT/WiFi/Product Code:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Reboot phone.
4. Connect USB cable, install drivers if needed.
5. Select Samsung diagnostic port in port settings.
6. Press 'Reset MSL' button to deactivate security.
7. Wait till phone reboot.
8. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
9. Fill values what you need to repair.
10. Press 'Repair' button.

Reset EFS, Disable Factory Mode:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
5. If you have yellow table on your device screen, then press 'Disable Factory Mode' button.

Wipe EFS/NVM:
If you have 'IMEI null/null' or 'Phone baseband unknown' errors,
Then you can try to repair this errors with this function.
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. To use 'Auto backup/restore QCN' function (recommended):
Type *#0808# and select 'DM+MODEM+ADB'.
Type *#9090# and select 'DM/DUN over HSIC'.
Or you can disable this function and use ADB only.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Choose diagnostic port in port settings if 'Auto backup/restore QCN' is not skipped.
6. Press 'Wipe EFS/NVM' button.

Operation: Repair
Selected model: SGH-T999
Selected port: COM30 SAMSUNG Mobile USB Serial Port
Software version: 24.5


Waiting ADB device... OK
Reading phone info...
Model: SGH-T999
Android version: 4.3
Product code: Not Active
Phone version: T999UVUEMJC
PDA version: T999UVUEMJC
CSC version: T999TMBEMJC
CSC country code: USA
CSC sales code: TMB
HW version: T999.00
Phone S/N: R21CB220P7D
Modem board: MSM8260A
RF cal date: NONE
IMEI: 353022058440501
Initialization AT RIL... OK
Bypass MSL... OK
Repairing IMEI... OK
Rebooting phone... OK
Repair done


Done with Samsung Tool PRO v.24.5

không có sóng luôn hic