ThayKính+Sửa IP | ThayKính 4,4S 90k | LinhKiện Minh Hải | LinhKiện Thảo Duy

KX ThayCảmỨng | LinhKiện Công Anh | iphone ipad Giá Sỉ | Toàn Phát Xả Hàng

ThayKính ĐàNẵng | Mua LCD BểKính | SửaChữa & LinhKiện | Sửa iphone ipad
Trang 6/10 đầuđầu ... 45678 ... cuốicuối
Kết quả từ 51 tới 60 trên 93
  1. #51
    Senior Member phong_tanloc's Avatar
    Tham gia ngày
    Oct 2009
    Bài gởi
    214
    hello

    CYCLONE BOX ADDED ALL LATEST BLACKBERRY MEPS (including new sec 2011)


    (12 New Security Meps Added)



    NOTE :
    This is Server Side Update ,So you dont have to do anything just enjoy calculating new meps with CycloneBox


    br
    CycloneBox Team
    Yahoo:phong_tanloc
    Học - Học Nữa - Học Mãi

  2. #52
    Senior Member phong_tanloc's Avatar
    Tham gia ngày
    Oct 2009
    Bài gởi
    214
    Hi, New Installer for Cyclone Box is Ready.

    What's new ?

    =====================
    Installer v1.13
    24.05.2011
    =====================
    - New BB5 FBUS/USB Loaders v11.14.0 introduced
    - Added 20 digits NCK recognization. Software will now give alert upon reading LBF data, when 20 digits NCK data will be found. This saves server time!
    - The Profile Bits are also analyzed now during Reading LBF Data. If phone is i.e. from Telcel Mexico - LBF data will not be readen (because it will not accepted calculated NCK code). This saves server time!
    - BB5/XGold LBF is creating now additional "BCL" format file
    - BB5/XGold LBF is creating now additional "SHA" format file
    - BB5/XGold LBF is creating now additional oclHashCat ATI based 64-bit BAT File
    - BB5/XGold LBF is creating now additional oclHashCat ATI based 32-bit BAT File
    - BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 64-bit BAT File
    - BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 32-bit BAT File
    - SIMLOC30 RPL Write Fixed (C7-00,C2-01,...)
    - The generated "BAT" file could be used by oclHashCat-lite. It's 3rd party software, avaiable here: Download oclHashcat-lite-0.05.7z - hashcat, advanced password recovery . Unpack it somewhere, and place in same dir readen "BAT" files. oclHashCat is 15% faster (can reach 6Billions hashes/sec on 2xhd5970) than log2cod, plus it supports latest ATI GPUS (HD6970,HD6990,HD6xxx). It supports calculation resume, etc.
    - You don't need now log2cod to generate LBF Data. Just use generated BAT file for fast oclHashCat calculation. Generated COD file you can send directly to our server via "Send COD File to server" button to receive valid Level 7 code.
    - Added oclHashCat COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
    - Added MxCrap COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
    - Added warning message when TX2 transmission error occurs during 2ND Loader Initialization
    - Upgraded RAPIDO Custom loader to v1.05. Fixed Reading Unique Data issues on old Public Rom (A8C1D671) based phones (N95,N78,...).
    - BlackBerry MEP-4 calculation added
    - Merged previous updates (RAPIDO/RAPU/RAP4 all latest hashes support for reading LBF data, etc...)
    - Fixed Security Code Reset Issues on DCT4/BB5 Platform
    - Firmware v1.61 Released
    - Minor changes and bugfixes

    Where from download?

    http://www.karwos.hk/CycloneBoxInstaller.exe

    The installer already contains all latest updates, you don't need to download nothing more!

    Best Regards,
    Cyclone Team
    Yahoo:phong_tanloc
    Học - Học Nữa - Học Mãi

  3. #53
    Super Moderator CuDuy-VFS's Avatar
    Tham gia ngày
    Jan 2007
    Bài gởi
    16,909
    Hi, new firmware for Cyclone Box was just uploaded at our server.

    What's new?
    - BB MEP-24660-003 added
    - BB MEP-34870-001 added
    - BB MEP-39371-001 added
    - BB MEP-40488-002 added
    - BB MEP-40954-001 added
    - BB MEP-41468-001 added
    - XGold1 ASC Flashing Booting issues solved
    - Minor changes and bugfixes

    This is server-side update only.
    Upgrade your box using "Box Maintenance".

    Best Regards & Stay Tuned,
    Cyclone Box Team

  4. #54
    Super Moderator CuDuy-VFS's Avatar
    Tham gia ngày
    Jan 2007
    Bài gởi
    16,909
    Hi, this is server-side update only, upgrade your box using Box Maintenance.

    - MEP-31845-002 - added
    - MEP-41261-001 - added
    - MEP-42517-001 - added
    - MEP-08589-001 - fixed NCK length
    - Changed default SX4 Emulation Serial Number due to blacklist by Nokia in latest PA_SD. Now SX4 serial is calculated using box unique OTP Area, so quite randomfull and further blacklist not possible too.
    - Minor Changes and bugfixes

    Best regards N Stay Tuned,
    Cyclone Team

  5. #55
    Moderator
    Tham gia ngày
    May 2007
    Bài gởi
    566
    Hi, new firmware for Cyclone Box is ready.

    Signature: Cyclone Nokia/Blackberry Application v01.71, (Sep 11 2011 17:49:29, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011

    What's new ?
    - MEP-04104-008 added
    - MEP-42490-002 added
    - Optimizations in TX2 data shifting
    - Fixed problems with resuming device from Static (sleep) mode on some configurations
    - Fixed some variants of JCOP31 handling
    - Minor changes and bugfixes

    This is server-side update only, just do Box Maintenance and your box will be updated. Keep note that new major installer is still not ready yet (many internal changes related to engine, etc), however it should be ready within next week, so be prepared

    Best Regards,
    Cyclone Team

  6. #56
    Senior Member thanhtunggialai's Avatar
    Tham gia ngày
    Jul 2011
    Bài gởi
    528
    CycloneBox Installer v1.16 (Black Edition)


    MAJOR FUNCTIONS ADDED
    • New BB5 FBUS/USB Loaders v11.24.00 Introduced
    • Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still "old method" avaiable in connection tab.
    • Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt )
    • Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or "Old USB Flashing Method"
    • "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab
    • "Settings" tab renamed to Connection
    • TX2 settings removed from BB5 Flashing Tab
    • RAPU Flashing/Booting Improved
    • C2-02 XGold2 Flashing "Added" Cyclone has flashing compatibilty for this model, but MassMemory file couldn't be handled becasue too big. Fixed.
    • BB5 Mass Memory Flashing Tested Cyclone SW has this posibility from long time ago...
    • Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails.
    • Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally
    • Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11
    • Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS
    • Added support for generating extended DCT4 RPL with Product Data for above models (CS problems)
    • Alcatel Calculator added to gui
    • PMM Protection Checkbox added upon PM write. Use to protect PM security fields.
    • Diagnostic Module Added
    • Selftests moved to new "Diagnostic" module
    • Vibra Tests Added
    • Backlight Tests Added
    • "Autodetect" added for DCT4 Unlocking. Unique method non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable on all boxes right now). If there is problems with autodetection user still can select unlocking method manually.
    • Removed DCT4 ASK-RPL From Credits Manager
    • Removed SuperDCT4 Activation from Credits Manager
    • StatusBar messages are more accurate now
    • Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and programm it one-click REPAIR ??????????????4.
    • CacheV2 Introduced
    • XGold1/2 Flashing Routines rewritten to be more memory effective
    • Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2
    • USB Connection Type is now selected automatically when XGold2 platform found
    • The supported MEP List are now acquired from box once Blackberry Tool launch
    • Moved UEM stuff to new "ASK/RPL Tool"
    • XGold2 MassMemory flashing added
    • Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc)
    • Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for Blackerry,XGold1,...)
    • XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed
    • Relock files updated for DCT4
    • AutoUpdater Introduced
    • USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC)
    • Database Unlock Introduced
    • RPL Write revised
    • PARTNERC certificate support added for Certificate Read
    • PARTNERC certificate support added for Certificate Write
    • PARTNERC certificate support addef for RPL Operations
    • Erase files support added
    • DCC configuration for NIMMIIIIRRFF06150000 added
    • DCC configuration for NIMMIIIIRRFF095A1F05 added
    • DCC configuration for NIMMIIIIRRFF095A1F04 added
    • DCC configuration for NI00IIIIRR0306150018 added
    • DCC configuration for NIMMIIIIRRFF095B1F05 added
    • DCC configuration for NIMMIIIIRRFF0102F201 added
    • DCC configuration for ISL2TI0200000103B840 added
    • DCC configuration for 8600030001040A021001 added
    • DCC configuration for 860003000104094B2F01 added
    • DCC configuration for 86000300010401035424 added
    • DCC configuration for NI00BC000003095B1F00 added
    • DCC configuration for NI00BC0000030102F203 added
    • DCC configuration for NI00BC0000030102F202 added
    • DCC configuration for NI00BC000003095B1F05 added
    • DCC configuration for NI00BC000003095B1F01 added
    • DCC configuration for NI00IIIIRR030C213402 added
    • DCC configuration for NI00IIIIRR030C213401 added
    • DCC configuration for NI00IIIIRR030C20C605 added
    • DCC configuration for NI00IIIIRR03094B2F01 added
    • DCC configuration for NI00IIIIRR0301022E05 added
    • DCC configuration for NI00IIIIRR0301022E01 added
    • DCC configuration for NIMMIIIIRRFF0C206C02 added
    • DCC configuration for NI00IIIIRR0301035602 added
    • DCC configuration for NI00CS0000040C213402 added
    • DCC configuration for NI00CS00000401022E05 added
    • DCC configuration for NI00BC0000040F03F802 added
    • DCC configuration for NI00BC0000040A4E2000 added
    • DCC configuration for NI00BC000004095B1F01 added
    • DCC configuration for NI00BC000004095B1F00 added
    • DCC configuration for NI00BC0000040103B904 added
    • DCC configuration for NI00BC0000040102F201 added
    • DCC configuration for NI00BC00000401022C00 added
    • DCC configuration for 0A4E2007 added
    • DCC configuration for 0103B904 added
    • SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712
    • HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645
    • Models.ini refreshed
    • Skin Stack Updated
    • Previous updates included
    • Nokia Connectivity Cable Drivers updated to v7.1.42.0
    • Box Firmware v01.73 Released



    BUG FIXES & IMPROVEMENTS
    • Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore
    • Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file
    • Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem)
    • Check flashing Bus for WD2 fixed
    • Read UEM Imei for WD2 Fixed
    • Read ASK for WD2 Fixed
    • Write RPL for WD2 Fixed
    • Fixed lots of Access Violatios after closing up Nokia Tool
    • Fixed bug with disappearing Tray icon after Minimize to Tray
    • Bruteforce between NCK Fixed
    • PM Write bugs fixed (Access Violation)
    • Fixed bug with Broadcom Read Info
    • Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab
    • Fixed product mismatch on XG1/XG2 autodetection
    • Fixed invalid Calculation of Mastercode
    • 6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M autoselection is HWID based and may fails anytime).
    • OMAP Loaders Fixed
    • Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0



    Downloads
    LINK1
    LINK2
    LINK3


    Still more to come so stay tune


    Best Regards,
    Cyclone Team
    Thanh Tùng Mobile
    thanhtung_gialai
    09.3258.6258

  7. #57
    Super Moderator CuDuy-VFS's Avatar
    Tham gia ngày
    Jan 2007
    Bài gởi
    16,909
    Hi, new firmware for Cyclone Box is just uploaded at server.

    What's new?


    - MEP-10129-006 added
    - MEP-04626-001 fixed length
    - MEP-06529-001 fixed length
    - MEP-06529-002 fixed length
    - MEP-06530-001 fixed length
    - MEP-06530-002 fixed length
    - MEP-07321-002 fixed length
    - MEP-07723-001 fixed length
    - MEP-08881-001 fixed length
    - MEP-08882-001 fixed length
    - MEP-09292-001 fixed length
    - MEP-10073-001 fixed length
    - MEP-18601-001 fixed length
    - MEP-19877-001 fixed length
    - MEP-24660-001 fixed length
    - MEP-30218-001 fixed length

    Update your box using box maintenance.

    Best Regards,
    Cyclone Box team

  8. #58
    Senior Member anhtuyen107's Avatar
    Tham gia ngày
    Apr 2009
    Bài gởi
    596
    Hi, new firmware for Cyclone Box is just uploaded at server.

    Added support for Blackberry MEP-29318-002.

    Best Regards,
    Cyclone Team
    Yh: anhtuyen107@yahoo.com.vn . 0987051989
    Repair Mobile all
    Thái Học - Bình Giang - Hải Dương

  9. #59
    Senior Member thanhtunggialai's Avatar
    Tham gia ngày
    Jul 2011
    Bài gởi
    528
    Hi, latest bomb for Cyclone Box is ready

    Update is 100% free and standalone for CycloneBox users;-)

    - Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry.

    - Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones

    - Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones


    - Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones

    - Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones


    - Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones

    - Supported interfaces: USB and FBUS

    - Small bug fixes, i.e. PM protection is now unticked by default




    Nokia 701, reading sl3 log file
    Code:
    [Nokia USB Phonet]: Port opened OK!
    Reading SL3 LOG File...
    [Nokia USB Phonet]: Port opened OK!
    MCU Version V 79u_11w31.4
    MCU Date 16-08-11
    Product RM-774 (Nokia 701)
    Manufacturer (c) Nokia
    IMEI 358272040230347
    Mastercode 752474040
    Analyzing Profile Bits...
    Phone can be NCK unlocked using KEYPAD
    Phone can be NCK unlocked using FBUS
    15 Digits NCK Found
    WARNING: "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    [Nokia USB Phonet]: Port opened OK!
    Switching to RAW Mode...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
    CMT_BOOT_ROM_CRC: 2CAC45E2
    CMT_SECURE_ROM_CRC: 3BC33C8B
    CMT Ready!
    RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    ROM Ret: 0xFFFD125D
    ROM CMT dwAddr: 0x10004FF0
    ROM CMT dwLength: 0x00627837
    Seems ROM Initialized OK!
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Sending Auxiliary Loader...
    Auxiliary Loader Sent!
    Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs
    Custom loader running OK! Working...
    If phone doesn't powering into Local Mode now for some reason do following:
    1. Re-insert battery
    2. Power it on, when asked use Ovi/Pc Suite Mode
    Readed OK, Saving to "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC "
    Success!
    Nk701 detailed security analysis
    Code:
    Started Phone Security Analysis...
    [Nokia USB Phonet]: Port opened OK!
    MCU Version V 79u_11w31.4
    MCU Date 16-08-11
    Product RM-774 (Nokia 701)
    Manufacturer (c) Nokia
    IMEI 358272040230347
    Mastercode 752474040
    Reading Security Block...
    Security block OK and saved to "RM-774_358272040230347_2011-10-04_022815.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking ECC KEYS...
    ECC KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!
    Nk 701, full RPL
    Code:
    RPL Creation started...
    Processing CMT Part...
    [Nokia USB Phonet]: Port opened OK!
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-774_358272040230347_2011-10-04_022831.SecurityBlock.PM"
    "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good...
    Storing Additional Data...
    Checking Superdongle Key...
    Encrypting Superdongle Key...
    Storing Superdongle Key...
    Checking CMLA Key...
    Storing CMLA Key...
    Booting CMT...
    [Nokia USB Phonet]: Port opened OK!
    Switching to RAW Mode...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
    CMT_BOOT_ROM_CRC: 2CAC45E2
    CMT_SECURE_ROM_CRC: 3BC33C8B
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.24.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    ROM Ret: 0xFFFD125D
    ROM CMT dwAddr: 0x10004FF0
    ROM CMT dwLength: 0x00627837
    Seems ROM Initialized OK!
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0060 (Samsung), Size: 1024MBytes, VPP: Not Supported
    RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.24.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: FEB3BB7481D3E5D0EAC907335A4402A071493D53
    APE Subsystem Not Found
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Storing PARTNERC...
    Restarting MCU...
    RPL Saved OK
    Standalone SX4 operation
    Code:
    SX4 Authorization / SD Repair Procedure Started....
    [Nokia USB Phonet]: Port opened OK!
    "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good...
    [Nokia USB Phonet]: Port opened OK!
    MCU Version V 79u_11w31.4
    MCU Date 16-08-11
    Product RM-774 (Nokia 701)
    Manufacturer (c) Nokia
    IMEI 358272040230347
    Mastercode 752474040
    Reading Security Block...
    Security block OK and saved to "RM-774_358272040230347_2011-10-04_022851.SecurityBlock.PM"
    SX4 Status: Not authorized (74)
    Started mutual authenthication with card...
    Receiving Phone Seed 1...
    Phone Seed 1 Received
    Sending calculated Data 1, and expecting Seed 2...
    Calculated Data 1 accepted, Phone Seed 2 Received
    Sending calculated Data 2
    Calculated Data 2 sent, Checking Authorization Status again
    Authorization successfully finished!
    Looking for Virgin PM In Database...
    Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
    Copying our loaders will affect in cracks/clones in market shortly and maybe Broadcom Unlocking business destroy.

    At least firmware 1.74 needed (update isn't needed at all).
    Don't forget to have installed latest v1.16 installer (http://www.karwos.hk/CycloneBoxInstaller.exe), so Autoupdate module will do the job.


    Best Regards,
    Cyclone Team
    Thanh Tùng Mobile
    thanhtung_gialai
    09.3258.6258

  10. #60
    Super Moderator CuDuy-VFS's Avatar
    Tham gia ngày
    Jan 2007
    Bài gởi
    16,909
    Hi, firmware v01.77 was just loaded to server.
    • Added new Blackberry MEP-175683-003 (MTS Moscow, North-West GSM, KB Impuls BeeLine) and
    • Added free SuperBB5 (sl3direct) routines.
    STAY TUNED.

    Best Regards,
    Cyclone Team

+ Trả Lời Ðề Tài
Trang 6/10 đầuđầu ... 45678 ... cuốicuối

Tags for this Thread