ThayKính ip6+Note4 | BánMáy+ÉpKính | LinhKiện MinhHải | LinhKiện ThảoDuy

MuaLCDBểKính | LinhKiện Công Anh | 260 Trường Chinh | Hải Minh iPhone

SAMSUNG | ThayKính+LkZinRẻ | VQ Ép Kính+LK | Trùm Sửa iPhone
Kết quả từ 1 tới 9 trên 9
  1. #1
    Senior Member LongMobileTG's Avatar
    Tham gia ngày
    Oct 2009
    Bài gởi
    1,216
    Anh em nào có file C1-01 rm-607 TV cho mình xin với ,cám ơn trước
    ĐTDĐ HOÀNG LONG

    ĐC: Mỹ Tho , Tiền Giang , tel:0918.611.126 , yahoo:longmobiletg

  2. #2
    Banned
    Tham gia ngày
    Dec 2010
    Bài gởi
    3,855
    up phụ thôi mình không có ai có post đi

  3. #3
    Super Moderator CuDuy-VFS's Avatar
    Tham gia ngày
    Jan 2007
    Bài gởi
    17,807
    RM-607-ver 3.35 TV................

  4. #4
    Senior Member LongMobileTG's Avatar
    Tham gia ngày
    Oct 2009
    Bài gởi
    1,216
    Trích Nguyên văn bởi CuDuy View Post
    RM-607-ver 3.35 TV................
    có file chạy bằng phoenix không anh
    ĐTDĐ HOÀNG LONG

    ĐC: Mỹ Tho , Tiền Giang , tel:0918.611.126 , yahoo:longmobiletg

  5. #5

  6. #6
    Super Moderator CuDuy-VFS's Avatar
    Tham gia ngày
    Jan 2007
    Bài gởi
    17,807
    Trích Nguyên văn bởi LongMobileTG View Post
    có file chạy bằng phoenix không anh
    con này thuộc dòng DCT4++ dùng chíp infineon cáp ốp lưng chưa test , chạy USB với ATF done.

    log đây

    Code:
    Number of Image Files: 3
    Processing Image File : 
    rm607__03.30.mcusw
    Processing Image File : 
    rm607__03.30.ppm_v
    Processing Image File : 
    rm607__03.30.image_v_0596365
    []: Found 1 active devices.
    [Nokia C1-01 USB Phonet]: Opening Connection
    [Nokia C1-01 USB Phonet]: Port opened OK!
    SW: V 03.30 17-11-10 RM-607 (c) Nokia
    IMEI: 355950047665564
    START FULL PM BACKUP
    Please Wait...
    Reading : PM 0~400... OK!
    FULL PM Backup Saved to:
    C:\AdvanceBox Turbo Flasher\Nokia\Backup\355950047665564\USB_FULL_BACK UP_V 03.30 17-11-10 RM-607 (c) Nokia_355950047665564__61624.pm
     
    Reading battery value : 3785 mV
    Rebooting Phone...
     
     
    AUTO SELECTED DEAD USB FLASHING...
    If Flashing DOES NOT Start in 5 Seconds,
    Then Perform Steps 1, 2, 3 and 4...
    1. Remove USB and Battery...
    2. Insert USB.
    3. Insert Battery. (Some phones boot automatically)
    4. Please Power on phone shortly..
     
    Infineon USB Boot: F00A1FB300020303010100FF
    Sending PBL...
    PBL Successfully Sent...
    Sending SBL...
    SBL Successfully Sent...
    Setting Transmission Speed Done...
    Flash Chip Manufacturer: Intel Electronics Corp.
    Flash Boot Successful...
     
     
    Current File : rm607__03.30.mcusw
    Image Type : Main Firmware
    Sections : 05
    Compile Name: rm607__03.30.mcusw_ebl_psi.fls
    Data Size : 26217904 Bytes
    Sending Certificate Block
    FIRMWARE Certificate Block Sent Successfully...
    Processing Section 01 of 05
    FIRMWARE Erase Block: 0x40000000~0x4001FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: A830
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 02 of 05
    FIRMWARE Erase Block: 0x40040000~0x4007FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 262144 bytes
    Data Checksum: 0000
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 03 of 05
    FIRMWARE Erase Block: 0x40080000~0x4009FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: 865C
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 04 of 05
    FIRMWARE Erase Block: 0x400A0000~0x4019FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 1048576 bytes
    Data Checksum: 299D
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 05 of 05
    FIRMWARE Erase Block: 0x40400000~0x41BFFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 24641536 bytes
    Data Checksum: D64F
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Data Verification Successful...
     
    Current File : rm607__03.30.ppm_v
    Image Type : PPM Image
    Sections : 01
    Compile Name: package_v.ppm_ebl_psi.fls
    Data Size : 4258068 Bytes
    Sending Certificate Block
    PPM Certificate Block Sent Successfully...
    Processing Section 01 of 01
    PPM Erase Block: 0x41C00000~0x421FFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 4254724 bytes
    Data Checksum: 678F
    Uploading Data Blocks to phone...
    Block Write Successful...
    PPM Data Blocks uploaded to phone...
    Data Verification Successful...
     
    Current File : rm607__03.30.image_v_0596365
    Image Type : CONTENT Package
    Sections : 01
    Compile Name: package_v_0596365.image.fls
    Data Size : 13765904 Bytes
    Sending Certificate Block
    CONTENT Certificate Block Sent Successfully...
    Processing Section 01 of 01
    CONTENT Erase Block: 0x42200000~0x43E5FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 13762560 bytes
    Data Checksum: E912
    Uploading Data Blocks to phone...
    Block Write Successful...
    CONTENT Data Blocks uploaded to phone...
    Data Verification Successful...
    Total Flashing Time (Erase + Flashing) : 00:06:41(Booting time is NOT Included)
    Waiting for Phone to Start-Up..(Max 100 seconds)
    If Windows is Installing Drivers...
    Phone Polling MIGHT Exit Automatically.
    Elapsed Time: 5 Seconds...
    Elapsed Time: 10 Seconds...
    Elapsed Time: 15 Seconds...
    MCU: V 03.30 17-11-10 RM-607 (c) Nokia
    IMEI: 355950047665564 
    Model : J C1-01
    Mastercode : 0015606701
    Product Serial Number: HUC125446
    Product Code : 0596365
    Module Code : 0204427
    Basic Production Code: 0585582
    Default SN Type : 0
    MCU SW Version : V 03.30 17-11-10 RM-607 (c) Nokia V
    BT MCM Version : 19b5-22012
    PPM Version : V 03.30 17-11-10 RM-607 (c) Nokia
    HW Version : 1001
    RFIC Version : 96
    LCD Version : TPO
    Content Pack Version : Content: v_0596365 V 03.30 17-11-10 RM-607 (c) Nokia
    ********** SIMLOCK INFO ********** 
    CONFIG_DATA : 0010100000000000
    PROFILE_BITS : 800000000003000B
    Asic : 11
    Provider : Default Test Operator
    Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
    ST_SIMLOCK_TEST : PASSED
    ST_LCD_TEST : PASSED
    SECURITY_CODE : 12345
    PHONE_MODE : TEST MODE
    
    ================================================
    Dynamic Camera Configuration 
    ================================================
    DCC ID : NI00CS00000401022E05
    DCC Ver: 001004
    Status : OK
     
     
     
    FACTORY SET TO : Factory Set Full
    OK
    FACTORY SET TO : Leave Factory
    OK
    FACTORY SET TO : Production Tune
    OK
    FACTORY SET TO : Production Tuning
    OK
    FACTORY SET TO : Reset User Code
    OK
    FACTORY SET TO : Service Centre
    OK
    FACTORY SET TO : Software Upgrade
    OK
    FACTORY SET TO : User Data
    OK
    Life timer data is not yet used...
    Life timer: ----:--

  7. #7

    Tham gia ngày
    Jun 2011
    Bài gởi
    5
    Trích Nguyên văn bởi CuDuy View Post
    con này thuộc dòng DCT4++ dùng chíp infineon cáp ốp lưng chưa test , chạy USB với ATF done.

    log đây

    Code:
    Number of Image Files: 3
    Processing Image File : 
    rm607__03.30.mcusw
    Processing Image File : 
    rm607__03.30.ppm_v
    Processing Image File : 
    rm607__03.30.image_v_0596365
    []: Found 1 active devices.
    [Nokia C1-01 USB Phonet]: Opening Connection
    [Nokia C1-01 USB Phonet]: Port opened OK!
    SW: V 03.30 17-11-10 RM-607 (c) Nokia
    IMEI: 355950047665564
    START FULL PM BACKUP
    Please Wait...
    Reading : PM 0~400... OK!
    FULL PM Backup Saved to:
    C:\AdvanceBox Turbo Flasher\Nokia\Backup\355950047665564\USB_FULL_BACK UP_V 03.30 17-11-10 RM-607 (c) Nokia_355950047665564__61624.pm
     
    Reading battery value : 3785 mV
    Rebooting Phone...
     
     
    AUTO SELECTED DEAD USB FLASHING...
    If Flashing DOES NOT Start in 5 Seconds,
    Then Perform Steps 1, 2, 3 and 4...
    1. Remove USB and Battery...
    2. Insert USB.
    3. Insert Battery. (Some phones boot automatically)
    4. Please Power on phone shortly..
     
    Infineon USB Boot: F00A1FB300020303010100FF
    Sending PBL...
    PBL Successfully Sent...
    Sending SBL...
    SBL Successfully Sent...
    Setting Transmission Speed Done...
    Flash Chip Manufacturer: Intel Electronics Corp.
    Flash Boot Successful...
     
     
    Current File : rm607__03.30.mcusw
    Image Type : Main Firmware
    Sections : 05
    Compile Name: rm607__03.30.mcusw_ebl_psi.fls
    Data Size : 26217904 Bytes
    Sending Certificate Block
    FIRMWARE Certificate Block Sent Successfully...
    Processing Section 01 of 05
    FIRMWARE Erase Block: 0x40000000~0x4001FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: A830
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 02 of 05
    FIRMWARE Erase Block: 0x40040000~0x4007FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 262144 bytes
    Data Checksum: 0000
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 03 of 05
    FIRMWARE Erase Block: 0x40080000~0x4009FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: 865C
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 04 of 05
    FIRMWARE Erase Block: 0x400A0000~0x4019FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 1048576 bytes
    Data Checksum: 299D
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 05 of 05
    FIRMWARE Erase Block: 0x40400000~0x41BFFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 24641536 bytes
    Data Checksum: D64F
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Data Verification Successful...
     
    Current File : rm607__03.30.ppm_v
    Image Type : PPM Image
    Sections : 01
    Compile Name: package_v.ppm_ebl_psi.fls
    Data Size : 4258068 Bytes
    Sending Certificate Block
    PPM Certificate Block Sent Successfully...
    Processing Section 01 of 01
    PPM Erase Block: 0x41C00000~0x421FFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 4254724 bytes
    Data Checksum: 678F
    Uploading Data Blocks to phone...
    Block Write Successful...
    PPM Data Blocks uploaded to phone...
    Data Verification Successful...
     
    Current File : rm607__03.30.image_v_0596365
    Image Type : CONTENT Package
    Sections : 01
    Compile Name: package_v_0596365.image.fls
    Data Size : 13765904 Bytes
    Sending Certificate Block
    CONTENT Certificate Block Sent Successfully...
    Processing Section 01 of 01
    CONTENT Erase Block: 0x42200000~0x43E5FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 13762560 bytes
    Data Checksum: E912
    Uploading Data Blocks to phone...
    Block Write Successful...
    CONTENT Data Blocks uploaded to phone...
    Data Verification Successful...
    Total Flashing Time (Erase + Flashing) : 00:06:41(Booting time is NOT Included)
    Waiting for Phone to Start-Up..(Max 100 seconds)
    If Windows is Installing Drivers...
    Phone Polling MIGHT Exit Automatically.
    Elapsed Time: 5 Seconds...
    Elapsed Time: 10 Seconds...
    Elapsed Time: 15 Seconds...
    MCU: V 03.30 17-11-10 RM-607 (c) Nokia
    IMEI: 355950047665564 
    Model : J C1-01
    Mastercode : 0015606701
    Product Serial Number: HUC125446
    Product Code : 0596365
    Module Code : 0204427
    Basic Production Code: 0585582
    Default SN Type : 0
    MCU SW Version : V 03.30 17-11-10 RM-607 (c) Nokia V
    BT MCM Version : 19b5-22012
    PPM Version : V 03.30 17-11-10 RM-607 (c) Nokia
    HW Version : 1001
    RFIC Version : 96
    LCD Version : TPO
    Content Pack Version : Content: v_0596365 V 03.30 17-11-10 RM-607 (c) Nokia
    ********** SIMLOCK INFO ********** 
    CONFIG_DATA : 0010100000000000
    PROFILE_BITS : 800000000003000B
    Asic : 11
    Provider : Default Test Operator
    Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
    ST_SIMLOCK_TEST : PASSED
    ST_LCD_TEST : PASSED
    SECURITY_CODE : 12345
    PHONE_MODE : TEST MODE
    
    ================================================
    Dynamic Camera Configuration 
    ================================================
    DCC ID : NI00CS00000401022E05
    DCC Ver: 001004
    Status : OK
     
     
     
    FACTORY SET TO : Factory Set Full
    OK
    FACTORY SET TO : Leave Factory
    OK
    FACTORY SET TO : Production Tune
    OK
    FACTORY SET TO : Production Tuning
    OK
    FACTORY SET TO : Reset User Code
    OK
    FACTORY SET TO : Service Centre
    OK
    FACTORY SET TO : Software Upgrade
    OK
    FACTORY SET TO : User Data
    OK
    Life timer data is not yet used...
    Life timer: ----:--


    chay PM cho 1280 = usb the nao vay,co the huong dan chi tiet hon khong?

  8. #8
    Banned
    Tham gia ngày
    Oct 2010
    Bài gởi
    178
    dead usb done by mx box .

  9. #9
    Senior Member hlgroup's Avatar
    Tham gia ngày
    May 2010
    Bài gởi
    953
    Trích Nguyên văn bởi tuanmobilephone View Post
    chay PM cho 1280 = usb the nao vay,co the huong dan chi tiet hon khong?
    để bb5 chọn file mcu.ppm.cnt cắm usb nhấn flash rồi bỏ pin vào ngồi đợi ok

+ Trả Lời Ðề Tài